How to Instal Go Rhino E1 Electric Running Board: 2018 Jeep Wrangler JK 4 Door

Today I'll show step by step instructions on how to install powered running boards by Go Rhino onto a 2007-2018 JK Jeep Wrangler 4-Door. I created this video because the instructions were unclear or incorrect on a few steps. So if it's your first time installing Electric Running Boards, I recommend watching!
GoRhino E1 Electric Running Board Kits (As an eBay Partner, I may be compensated if you make a purchase)
2007-18 Wrangler JK 4-Door: ebay.us/ufNEfr
2018+ Wrangler JL 4-Door: ebay.us/BV0LEX
2018+ Wrangler JL 2-Door: ebay.us/PXVemK
2020+ Gladiator 4-Door: ebay.us/aLVUhG
Tools/Products used:
Panel Popper: amzn.to/3DqtMaf
5mm hex socket 1/4" or 5mm allen wrench
10mm socket 1/4": amzn.to/44W6PHD
13mm socket 3/8": amzn.to/4517cB1
18mm socket 3/8": amzn.to/3q193H8
isopropyl alcohol wipes: amzn.to/474vjjM
21/64" drill bit: amzn.to/3Kgif15
7/16” drill bit: amzn.to/3O3RGgF
Self etching primer: amzn.to/43E4VdR
(The above are affiliate links- I may receive a small compensation if you make a purchase. Thanks for supporting the channel!)
I don't have Patreon or ask for donations, but you can support the channel with some rad gear from my store: 6thgeargarage.c...
Instagram: 6th_gear
6thGearGarage