I was having similar issues with just only the audio. I ditched serato dj pro and now im on the latest version of serato dj. I also adjusted the updates per min from max to 40. Updates per sec. In the settings. And adjusted hardware latency to the middle. Ever since i did this. My ns7ii has become problem free. I hope this helps everyone out thats using numark ns7 1.2.or 3. To me my personal opinion. I believe numark hasn't lauched a newer driver that supports serato dj pro. And for that. Numark ns7 and ns7ii will run into audio issues. Serato dj seems to be the perfect mate. Not serato dj pro. Good luck and hope this worked 4 u like it did 4 me! Thank D.j.$.B. later! Peace!!!
Bro your the man. I was so excited to jump into my first 4 channel and I’m running into those staticky noises too. Considering making that switch.. is it similar based on like the format and stuff ?
@@bryanpahua4169 its the same. Layout just u cant use 2 decks in offline mode . Other than that. Very similar to serato dj pro. Newest version of serato dj and no issues! Use pro and your gonna stall😭😭😭💯🔇☚✌
Hey Dj P. I had the same issue when I Bought my NS7 ii . Delay and poor sound and static. So I all ready had all of the Serato dj and Serato dj pro. I ran and installed both Serato Versions on Yosemite,El Capitan,High Sierra and Catalina. I tested The Serato dj from 1.1.2 - 1.9.10 then tested Serato Dj Pro 2.0.0 to the latest at that time in 2019. It was weeks of testing and testing. The result was NS7 ii dos not work on any Serato pro Version and cant use any Mac OSX past El Capitan. I just bought a new Pioneer Dj Mixer DJM S-5 and It only uses Serato Dj Pro Version 2.5.12 to unlock it in the software. I tried to use One Macbook pro for the NS7 ii and the Pioneer S-5 mixer. I mean NS7 ii on Serato Dj and the S-5 on the Serato Pro. Both Serato Version dont work right.So Id removed all the Serato pro and Serato Dj. Im booked Almost every weekend and I make sure the my gear runs perfect. So backdate The Osx to El Capitan maintain your computer by clearing the cashes, keep ur Gig Computer for Gigs only and Use Serato Dj 1.9.10.Its stable and runs. Thanks Dj Teddy G
1: make sure that the controller is off but usb cable is connected to your computer. 2: while off, hold LOAD A, LOAD B and FWD buttons. 3: Turn on the NS7II with these buttons still pressed in. 4:The Cue Button on deck b will begin flashing. When you see this, hit the cue Button. 5: at this point, start the firmware update software on your computer. The software should show green status loading. 6: During the installation, the fx 1,2,3, and 4 qill be flashing. This indicates the firmware is properly passing. 7: once the process is complete, hit the OK button on the software and power cycle the ns7ii. Its ready for use
Open it up and look at the wiring... Could be a short... These starting to age and mine has that same problem after I play it for a while... Sometimes only 30 min. But often at least an hour... I bought mine a couple years ago from guitar center"used" it had been dropped but this big heavy m.f. is durable and worked fine for a few months but I was playing in my garage with it and wondered if the moisture in the air shorted something out but ive been scared to take it apart... It might just need to be dusted and something may have been spilled on mine be4 I bought it. Just had the outside cleaned... Good luck my NS7II brother. I love my controller just hate the bull shit when it happens. Hope you find the cure.
I wish I had seen this post a long time. I had this same issue and switched to Serato to get rid of it, but after several crashes with Serato , I went back to VDJ and figured it out. I UPDATED THE FIRMWARE AND IT WAS FIXED.
.. seems this is a Numark Driver Issue. Found the same problem in Trakktor & Serato threads, Mac & PC users alike. Numark needs to fix the driver and update it!
DJ Vic Mando. I got rid of that metallic sound by first praying and burning insense. Then i put cable in different port on laptop. And my prayers was answered. Peace and blessings y'all!!!
Just stumbling across your video while researching issues with this device before buying one. I’ve read through all the comments. I know you said you ended up getting the DDJ-1000srt, but do you still have this controller? I noticed in this video that you have the effects buttons (the A, B) selected on channels 1 & 2. Could some of your delay and or metallic sound additionally have been your sound running through effects (such as a flanger/phaser/delay)?
ooh i did have that issue with the ns7 II i had an amazon usb on there and all i did was changed it to the original ns7 usb cord and it worked fine every since
I got that same problem, but not the delay experience it fast when I streamed my music from off line , so I think the computer might not be strong enough, board want to much power
When it first did it to me I thought I blowed all my speakers then I played my phone though the rca plugs of the board and it sounded fine so I try to keep a eye on my pc light in the upper right hand corner to maker sure it stay green so sometimes I’ll have to adjust the volume on the software and turn the trim on the board down to about 10 to 11 o’clock
Crazy enough I had this a few years back the same problem but when I upgraded my laptop with extra RAM and upgraded Serato it eliminated the problem But yes it was horrible I would be DJing a beautiful set and it could happen any time between one hour to 2 hours and even even three or four hours in and it used to really piss me off ha ha!! Frustrating!! Especially in a full club at the time. Or if recording. Would kick in at anytime.
I think the program malfunction is. For windows at least is. The program when running will interfere with any other program search. Like when you open another window on the computer it starts to fail. THAT WHERE YOU NOISE COMES FROM. If you open like Itune for example just move the window around with the cursor you see the problem increase. the ns7 lll is pick up the program function and it's running thru the unit. Virtual DJ works much better!
No not really. I ended up Uninstalling all the drivers and reinstalling them. Works better but ended up with a new problem. It will play properly for a while and then the sound would randomly cut out. Platters still spinning, meters still going, and software still responding....but no sound coming out. The metal sound comes and goes but a couple months after shooting this video I switched to the Pioneer DDJ-1000 SRT. I play with the NS7 from time to time but never got it the way I wanted it...
My dads is an older model and the right side quit working. Trying to figure it out. Keeps saying no disk even though CD is in it. Plays through head set but not the speakers.
I'm guessing that your dad has the V7 which is a cdj. Perhaps reader inside has gone bad. This is the NS7ii. I hope you are able to figure out what's going on.
Update the numark drivers or firmware... use the cord it came with.. & also make sure your software is the same that serato provides.. because u mite have to down grade software to what numark says
I'm having a issue now with my MacBook. I had it refurbished and it's running catalina. And numark ns7ii doesn't have support for it. I'm going to have to downgrade. Sucks because the MacBook is running so good.
@@JRthepyroguy well what I did was split my hard drive... so basically you need to run older software... not Catalina.. try to install a older software.. I'm sure it will work then.. it's not compatible with new software... yeah I know bs.. but it will work if you do that... good luck
Yes and No. So I've had situations where the decks stopped playing but were still spinning. No music was playing on Serato and until I turned everything off and restarted it nothing worked.
i bought a used ns7II and came across the this same issue. Only when using the xlr output, I would get that noise. But with the rca output it there is no noise.
@@TheDJMENACENL I got the noise on the RCA output as well... Seems to be a component issue with the controller. What I do everytime I go to use it, is disconnect power cord for a minute then plug in power, connect USB to laptop, turn the controller then open serato
I'm having a hard time figuring out the issue with my recent used purchase of numark ns7 - I can only hear the fan turning one - no other sound nor any lights ? What can be the issue - any suggestions or idea on how this can be repaired ?
this is crazy I'm experiencing that static sound too from time to to time when im on my numark ns7III , they properly couldn't fix the issue smh spent all that money that sucks .
Yep everything plugged as it should be. After I disconnect the controller (usb) from the system sometimes it stops but most times it continues. I restart Serato and it's back to normal. The main issue is that this happens without warning. Sometimes I'm going for hours and no problem. Sometimes I'm going for 15 mins and it sounds like this.
Maybe something is over heating. Try to play music from another source ( Not your controller) using your same speakers and amps if it doesnt happen after a while then discard the speakers and amp, next step would be trying another computer and if thats not it then its definitely the controller.
I’m having the exact same problem, have try everything different computers, usb cables reinstalling software noting can fix it looks like it’s turntable’s issue? Don’t know what to do to fix it 😡
Yes I have another Mac with the exact same specs. Could never get it to do these things on the other computer. I ended up buying another controller and this one is just sitting around at this point.
Did you try reinstalling the driver I accidentally updated my computer when I shut it off and after it came back nothing was working right and then I had to go back to the driver that I installed and reinstall it and then everything worked fine.
In brazil: muito tempo tive problema com atraso ruídos e o numark desconecta no windows 10 e 11 Resolvi com dowgrade para windows 8.1 com e serato dj pro e virtual dj 2021 Ficou otimo
Clean your faders..that's where I believe you will find your problem..hope it helps..stay in touch bc I use the NS7II also.. djwillyweezz@gmail.com or mexremixes.com
I was having similar issues with just only the audio. I ditched serato dj pro and now im on the latest version of serato dj. I also adjusted the updates per min from max to 40. Updates per sec. In the settings. And adjusted hardware latency to the middle. Ever since i did this. My ns7ii has become problem free. I hope this helps everyone out thats using numark ns7 1.2.or 3. To me my personal opinion. I believe numark hasn't lauched a newer driver that supports serato dj pro. And for that. Numark ns7 and ns7ii will run into audio issues. Serato dj seems to be the perfect mate. Not serato dj pro. Good luck and hope this worked 4 u like it did 4 me! Thank D.j.$.B. later! Peace!!!
Bro your the man. I was so excited to jump into my first 4 channel and I’m running into those staticky noises too. Considering making that switch.. is it similar based on like the format and stuff ?
@@bryanpahua4169 its the same. Layout just u cant use 2 decks in offline mode . Other than that. Very similar to serato dj pro. Newest version of serato dj and no issues! Use pro and your gonna stall😭😭😭💯🔇☚✌
Can you help me ,Not getting any audio or all lights turn on ,I know this video it's old ,still wondering
Hey Dj P. I had the same issue when I Bought my NS7 ii . Delay and poor sound and static. So I all ready had all of the Serato dj and Serato dj pro. I ran and installed both Serato Versions on Yosemite,El Capitan,High Sierra and Catalina. I tested The Serato dj from 1.1.2 - 1.9.10 then tested Serato Dj Pro 2.0.0 to the latest at that time in 2019. It was weeks of testing and testing. The result was NS7 ii dos not work on any Serato pro Version and cant use any Mac OSX past El Capitan. I just bought a new Pioneer Dj Mixer DJM S-5 and It only uses Serato Dj Pro Version 2.5.12 to unlock it in the software. I tried to use One Macbook pro for the NS7 ii and the Pioneer S-5 mixer. I mean NS7 ii on Serato Dj and the S-5 on the Serato Pro. Both Serato Version dont work right.So Id removed all the Serato pro and Serato Dj. Im booked Almost every weekend and I make sure the my gear runs perfect. So backdate The Osx to El Capitan maintain your computer by clearing the cashes, keep ur Gig Computer for Gigs only and Use Serato Dj 1.9.10.Its stable and runs. Thanks Dj Teddy G
Having lots of issues with mines ,do you think it's the software ,I have try many
1: make sure that the controller is off but usb cable is connected to your computer.
2: while off, hold LOAD A, LOAD B and FWD buttons.
3: Turn on the NS7II with these buttons still pressed in.
4:The Cue Button on deck b will begin flashing. When you see this, hit the cue Button.
5: at this point, start the firmware update software on your computer. The software should show green status loading.
6: During the installation, the fx 1,2,3, and 4 qill be flashing. This indicates the firmware is properly passing.
7: once the process is complete, hit the OK button on the software and power cycle the ns7ii. Its ready for use
Hi do you have it by any chance
Open it up and look at the wiring...
Could be a short... These starting to age and mine has that same problem after I play it for a while... Sometimes only 30 min. But often at least an hour... I bought mine a couple years ago from guitar center"used" it had been dropped but this big heavy m.f. is durable and worked fine for a few months but I was playing in my garage with it and wondered if the moisture in the air shorted something out but ive been scared to take it apart... It might just need to be dusted and something may have been spilled on mine be4 I bought it. Just had the outside cleaned...
Good luck my NS7II brother.
I love my controller just hate the bull shit when it happens. Hope you find the cure.
I wish I had seen this post a long time. I had this same issue and switched to Serato to get rid of it, but after several crashes with Serato , I went back to VDJ and figured it out. I UPDATED THE FIRMWARE AND IT WAS FIXED.
can u send me the link for the firmware update
Hi do you have the update on the firmware
.. seems this is a Numark Driver Issue.
Found the same problem in Trakktor & Serato threads, Mac & PC users alike. Numark needs to fix the driver and update it!
DJ Vic Mando. I got rid of that metallic sound by first praying and burning insense. Then i put cable in different port on laptop. And my prayers was answered. Peace and blessings y'all!!!
🤣
Just stumbling across your video while researching issues with this device before buying one. I’ve read through all the comments. I know you said you ended up getting the DDJ-1000srt, but do you still have this controller? I noticed in this video that you have the effects buttons (the A, B) selected on channels 1 & 2. Could some of your delay and or metallic sound additionally have been your sound running through effects (such as a flanger/phaser/delay)?
ooh i did have that issue with the ns7 II i had an amazon usb on there and all i did was changed it to the original ns7 usb cord and it worked fine every since
I got that same problem, but not the delay experience it fast when I streamed my music from off line , so I think the computer might not be strong enough, board want to much power
When it first did it to me I thought I blowed all my speakers then I played my phone though the rca plugs of the board and it sounded fine so I try to keep a eye on my pc light in the upper right hand corner to maker sure it stay green so sometimes I’ll have to adjust the volume on the software and turn the trim on the board down to about 10 to 11 o’clock
Crazy enough I had this a few years back the same problem but when I upgraded my laptop with extra RAM and upgraded Serato it eliminated the problem But yes it was horrible I would be DJing a beautiful set and it could happen any time between one hour to 2 hours and even even three or four hours in and it used to really piss me off ha ha!! Frustrating!! Especially in a full club at the time. Or if recording. Would kick in at anytime.
I think the program malfunction is. For windows at least is. The program when running will interfere with any other program search. Like when you open another window on the computer it starts to fail. THAT WHERE YOU NOISE COMES FROM. If you open like Itune for example just move the window around with the cursor you see the problem increase. the ns7 lll is pick up the program function and it's running thru the unit. Virtual DJ works much better!
I have read that virtual memory may be the reason why you're hearing the noise on the output
Explain what that means and how can someone check such a thing?
Yo, DJ P>Nominal. Just wondering if you were able to get this issue resolved. Thanks for posting.
No not really. I ended up Uninstalling all the drivers and reinstalling them. Works better but ended up with a new problem. It will play properly for a while and then the sound would randomly cut out. Platters still spinning, meters still going, and software still responding....but no sound coming out. The metal sound comes and goes but a couple months after shooting this video I switched to the Pioneer DDJ-1000 SRT. I play with the NS7 from time to time but never got it the way I wanted it...
Defective power amp in.the board of the mixer would be my best guess
I HAVE THE SAME PROBLEM BRO!! I was embraced when finding out in a gig!! static sound with crispy crackling noises... I can't seem to fix this.
Estou com o mesmo problema, vc conseguiu resolver ?
My dads is an older model and the right side quit working. Trying to figure it out. Keeps saying no disk even though CD is in it. Plays through head set but not the speakers.
I'm guessing that your dad has the V7 which is a cdj. Perhaps reader inside has gone bad. This is the NS7ii. I hope you are able to figure out what's going on.
Update the numark drivers or firmware... use the cord it came with.. & also make sure your software is the same that serato provides.. because u mite have to down grade software to what numark says
I'm having a issue now with my MacBook. I had it refurbished and it's running catalina. And numark ns7ii doesn't have support for it. I'm going to have to downgrade. Sucks because the MacBook is running so good.
@@JRthepyroguy well what I did was split my hard drive... so basically you need to run older software... not Catalina.. try to install a older software.. I'm sure it will work then.. it's not compatible with new software... yeah I know bs.. but it will work if you do that... good luck
@@asbombent5697 thanks ..I'm going to do that. I have 2 ssd in it. I wonder if I could install sierra on the second drive ?
I have had that exact issue for 3 years now. No solution found yet. About to sell mine. Doesn't do this with NS73
I have problems with my ns7iii. All the lights are flashing and it will not even do anything! Just lights flashing! Do you know what the problem is?
Have you also have issues were it shuts down completely and everything is on?
Yes and No. So I've had situations where the decks stopped playing but were still spinning. No music was playing on Serato and until I turned everything off and restarted it nothing worked.
i bought a used ns7II and came across the this same issue. Only when using the xlr output, I would get that noise. But with the rca output it there is no noise.
I have the problem with RCA cables.. what is with the driver Update now then?
@@TheDJMENACENL I got the noise on the RCA output as well... Seems to be a component issue with the controller. What I do everytime I go to use it, is disconnect power cord for a minute then plug in power, connect USB to laptop, turn the controller then open serato
@@Moses1611 And for how long does it stay away then approximately??
@@TheDJMENACENL so far after 6 hours of playtime, i don't get any issue.
I'm having a hard time figuring out the issue with my recent used purchase of numark ns7 - I can only hear the fan turning one - no other sound nor any lights ? What can be the issue - any suggestions or idea on how this can be repaired ?
Did you ever out the problem .
this is crazy I'm experiencing that static sound too from time to to time when im on my numark ns7III , they properly couldn't fix the issue smh spent all that money that sucks .
Funny I've had mine sine it was released same issue. But have soled it!
Every machine does it mac, pc, surface etc. The only way it works for me is using a xenon based sever
Did you check all the connections going into the amplifier/speakers?
Yep everything plugged as it should be. After I disconnect the controller (usb) from the system sometimes it stops but most times it continues. I restart Serato and it's back to normal. The main issue is that this happens without warning. Sometimes I'm going for hours and no problem. Sometimes I'm going for 15 mins and it sounds like this.
Maybe something is over heating. Try to play music from another source ( Not your controller) using your same speakers and amps if it doesnt happen after a while then discard the speakers and amp, next step would be trying another computer and if thats not it then its definitely the controller.
Did u ever figure out the problem ?
Instead of Uninstall select repair and for sure it will work
Did you find a solution?
and then have you finally solved your problem and today even you have which version of serato and also that of numark
do you get the metal sound when you use rca main out?
I only get this problem when I use mixemergency but when I only use serato vedeo I have no issue so I guess it’s ram issue
I’m having the exact same problem, have try everything different computers, usb cables reinstalling software noting can fix it looks like it’s turntable’s issue? Don’t know what to do to fix it 😡
hi, sounds like a electric condensator uncharging sound... did you try on another computer or laptop or other usb?
Yes I have another Mac with the exact same specs. Could never get it to do these things on the other computer. I ended up buying another controller and this one is just sitting around at this point.
Did you try reinstalling the driver I accidentally updated my computer when I shut it off and after it came back nothing was working right and then I had to go back to the driver that I installed and reinstall it and then everything worked fine.
In brazil: muito tempo tive problema com atraso ruídos e o numark desconecta no windows 10 e 11
Resolvi com dowgrade para windows 8.1 com e
serato dj pro e virtual dj 2021
Ficou otimo
Un install the program and reinstall the correct one, that should do it and if it don’t install the correct driver
This is why my controller plays cds too I will never have to solely depend on a computer!!
You can reset the ns7 and update the software that should solve your problem.. and also get a USB cable with max transfer of 480mbps
Reset and update firmware
@@saddatboakyehi do you have that info by any chance
yes
Turn the filters to 12 o’clock
why is my ns7 2 frozen up afto restarting all the times this is crazy dam anyone know how to fix this plz
U NEED 8GB OF RAM TO RUN PROPERLY
one ! your filter shud be at 12oclock
Clean your faders..that's where I believe you will find your problem..hope it helps..stay in touch bc I use the NS7II also..
djwillyweezz@gmail.com or
mexremixes.com
What’s up with the missing files it plays for about 2-3 minutes then it freezes help
change your laptop
This is why I don’t like numark.
I hope you found the problem, if not just change a better usb cable, I have the same problem and that fix all
@@javiervalencia3490does it matter what kind
numark drivers it's a piece of shit! I do not recommend these products!
I regret buying this piece of garbage