Great clear explanation. Well done. Drove one yesterday for the first time and didn’t have a proper induction. You answered a few questions I had. Thanks!
I love you brother. I just got employed because of your video. I really didn't know what to do but after watching you three times I crammed your moves and used a Bluetooth headset to explain as you were explaining. I owe you. 💪🏽Welcome to Kenya
Very informative & easy to understand. You gave every minute details about this truck. Good bless you friend & have a save journey everytime you drive.
Thanks for showing us! Most of drivers have been reluctant to show us fearing that we may beat them with life if we find a job! Jealous! Forward Snethemba forward
Thank you for a very clear introduction and well understood..just an easy thing if one follows ur instructions.Gone are the days of Manual gears where u shift from Low to High gears.
@@sinethembablose3875 you are the guy, if you ever get hold of 3340~Actros , kindly do a video just like this one. Also give us a little insight on the load factor.(like the gear selection and handling when the truck is fully loaded )
Just discovered your channel. Very good. I have a question. If you park up and forget to select neutral I'd leave it in the drive position, can that cause any issues when you come to start up a few days later?
brother i real got you very well i realise what you teach me and now i fee confort i can drive it at any time thank you thank you ,but i would like to know on which point of rotation i should change gear? from one to another???
Soon I'll post a video about tipping the load. But to be short, on automatic transmission you put the truck on neutral then you switch on the button called PTO you'll feel the truck like it's taking the gear but engaging PTO. Then there are 2 pins by the driver's seat you use them to tip the trailers.
scania r500 2011 model was the last ones that had a retader lever retader(hydraulic braking box on back of gearbox) this G460 has got a automatic sensor than works with the footbrake and accelerator pedal
Starting my first job as truckdriver tomorrow. Never driven Scania before, only mercedez. Thank you for informational video.
All the best brother
Scania ever my best prime mover. R420 was my all time.
Great clear explanation. Well done. Drove one yesterday for the first time and didn’t have a proper induction. You answered a few questions I had. Thanks!
I appreciate that bro
Thank you bro can you give us a drive so that we have practical lessons. You're a good teacher
Thanks I appreciate it. No problem
@@sinethembablose3875 brother can u plz can I have yr number u are a good teacher
I love you brother. I just got employed because of your video. I really didn't know what to do but after watching you three times I crammed your moves and used a Bluetooth headset to explain as you were explaining. I owe you. 💪🏽Welcome to Kenya
Thanks brother. I feel so alive and appreciated. Enjoy and respect your new job🤝
Hey man Jose kumbe uko apa team Kenya,acha tuibe ujus 😂😂😂
My best and favorite truck in the world SCANIA 🚛🇿🇦
I drive one 😅😅 but I'm tired of G460 now
@@sinethembablose3875 see you soon brother I'm always on N3 keep me posted when you are on N3
@@Andries349 Alright my brother, that's not a problem. I see you going places😅
I want to say thanks for your video for my son he learned through it and now he can drive scania while at 17yrs 😊
Very informative & easy to understand.
You gave every minute details about this truck. Good bless you friend & have a save journey everytime you drive.
Thanks bro
nice and very informative vlog, You're good in english bro.. clear and detailed presentation of of your scania...keep in vlogging more uploads...
Thanks alot Raider PJ.
i like your story my brother temba God be with you i enjoyed what you teach bro
Thanks alot MAYBIN
I thank you for helping us because it's very difficult to get a driving school of actros and scania
That's true
According to what i learn from you i can drive a scania now
Very easy bro as long as you stay calm😁😁
Thanks for showing us! Most of drivers have been reluctant to show us fearing that we may beat them with life if we find a job! Jealous! Forward Snethemba forward
Nice video bro,I have played twice 🇰🇪🇰🇪 wapi likes
I appreciate it Peter
Hello brother I really enjoy your explanation concerning with this Scania G460. Good job. All the way from Tanzania Dar es salaam.
I appreciate that brother🤝🙌
@@sinethembablose3875 Good day brother, I hope your Tuesday has gone well. Please if you don't mind can I get your WhatsApp contact.
+255716 122226
@@otienookeyo1423 afternoon brother. sinethembablose96@gmail.com we'll take it from there.
@@sinethembablose3875
Hi brother Sinethemba.
I hope you're doing great. Am very proud to be in touch with you my pal.
@@otienookeyo1423 👊👊👊 that's life brother🤝🤝🤝
Thank you so much big man, knowledge is power. Keep it up.
👊👊 thanks
How to op o operate n exchos break
I've driven the P410 & G460 ( manual & automatic transmissions) & the ride was really smooth
I still wish to experience the P series one.
I like what u doing Comrade can assist too much to amateurs
@@zingisilemaraseniduma778 indeed.
Thanks so much for the clear explanation and information my guy
Thankyou my brother I got you're lesson well 90%✅✅✅✅✅ I will repeat it one more
Thank you for a very clear introduction and well understood..just an easy thing if one follows ur instructions.Gone are the days of Manual gears where u shift from Low to High gears.
Good teaching my brother am following you ❤❤
Simple and straight forward..Thanks bhuti
Kubonga mina bhuti
Congratulations congratulations guy, I'm in DRC (Lubumbashi)
i real enjoy your teaching your a good teacher thank you i can now drive scania
I appreciate that🤝
Thanks for good lesson Themba, muhle umsebenzi wakho mybroe
Kubonga mina mf2🤝
u. a. good. instructor keep. it on
Thanks Phillip
Thanks Bro I learnt something from you keep it up.
Excellent explanation brother thank you very much🙏
Thanks for the teachings bro.... That was helpful
It's a pleasure💪
Nice Job their.. 👌👌💯💯💯
Thanks👊👊
Thanks for sharing this knowledge
Sinethemba baba.. that was detailed and perfectly elaborated. Kenya representing
Thanks alot 🙌
@@sinethembablose3875 you are the guy, if you ever get hold of 3340~Actros , kindly do a video just like this one. Also give us a little insight on the load factor.(like the gear selection and handling when the truck is fully loaded )
@@everythingnirvana2690 I'll definitely do that my brother.🙌 Thanks for suggestions.
Thanx u such agood teacher brother
I appreciate it brother.
Thank you so much for the videos my brother
Thank you my brother from another mother 🙏
Thanks from Zambia
From SA👍👍👍👍
I Srart my truck school driver tommorow thank you for your help
Much appreciated 🙌
Wow 👌, the best teacher
Much appreciated 👏
Am new in trucking Blose I still need to learn a lot from u bro
Good information bro and nice english. Keep it this way!
Much appreciation bro🙌👊 thanks.
Just discovered your channel. Very good. I have a question. If you park up and forget to select neutral I'd leave it in the drive position, can that cause any issues when you come to start up a few days later?
Nice Informative Video Bro 👏👏👌👍
Thanks brother
@@sinethembablose3875 👍🤗 Brother
Danko my brother for the lesson hope to get something soon
Thanks brother.
Thabk you so much bro! This was very helpful! Keep safe!
It's a pleasure broe💪
Very good explanation keep it up
Well articulated blose ,looking forward to another interesting video, representing Zambia
Thanks bro. I'm from South Africa 💪
I love your explanation
Thanks Mwape
Man this is the best video I've ever seen so good man
Thanks alot.
@@sinethembablose3875you're welcome brother greeting you from Morocco keep it up 💪💪💪
All the way from South Africa to Morocco👊💪 I'm proud.
Very helpful and educational. Can you also do a video to show how to use the tipper truck.
I will definitely do it brother, thanks.
Thank so much for your efforts.
This is way better than the Eaton manual transmission 👍
😁😁😁😁 yah it is.
excellent bro u did it well .thank you
Thanks bro
i like it.looking forward for review on the shacman truck
Thanks alot. More trucks are coming.🙌
Nice bro from india
💪💪
Great the best part is the automatic gear I never knew the gear is located on the right side of the steering of the Scania tric
I'm glad I could help Ann Mathai👊
Wow, God bless you, so far you are the best in tutorials 💪 💪 💪
Thanks Martin🤝
Thanks bro for the great work ur doing 4 us
brother i real got you very well i realise what you teach me and now i fee confort i can drive it at any time thank you thank you ,but i would like to know on which point of rotation i should change gear? from one to another???
Hi, use your green band on the rev counter (green colour) to change gears. You can change up at 12,13,14 15 and change down at 9, 10, 11,
Well done bro thank you very much
Dankie mr Blose💪
Yessss from TANZANIA 🇹🇿
All the way from South Africa to Tanzania, thanks alot
Good presentation
clear explanation thanks bro
I enjoyed to learn
I appreciate that
Thanks so much,l salute you👏
Hey bro u do the good thing salut 4 u
Am drive to and always i lke 2watch ure vdeo coz u gv me more experience
Thanks brothers.
well explained bro. may u help how do you operate trailer brake- the one that is on the dashboard.
Thanks broe. If your truck is having trailer break you just pull it down slowly you'll feel it braking and reducing the speed.
Yes brotha thank you for the vedeo
Welldon teacher i learned
Thanks. Please don't forget to recommend and share
Thanx for your good lesson,pls I want to know about scania R420
Good Job
Good explanation
thanx for the teachings my bro
You welcome bro
Great Job brother Thanks a Lot
Thanks bro you help me
Thank you very much brother
I like it big up broo✊✊✊
💪💪
Well explained impressed
Thanks alot 🙌
Thank you very much thisha, im looking forward for your next video. Danki Blose.
It's a pleasure Mr Gxabhashe. Today I'm putting another one I hope you've subscribed already so you don't miss out.
Good instructions
Brother. I sit for my truck licence tomorrow. Wish me luck 🤞
Thanks brother well informative
It's a pleasure bro
Thank you so much bru
I thank you
Woow good lesson my brother
Dankie broe
goodday bro hope kuhamba kahle kuwe, may i know how u operate superlink tipping and manouver
Soon I'll post a video about tipping the load. But to be short, on automatic transmission you put the truck on neutral then you switch on the button called PTO you'll feel the truck like it's taking the gear but engaging PTO. Then there are 2 pins by the driver's seat you use them to tip the trailers.
@@sinethembablose3875 thanx a lot it will go a long way in my knowledge base
Appreciated 💪
Thanks for the video
Thanks broe
Verry good 👍
Informative 👍
Thanks bro.
Very good bro
Thank u bro
How do you operate/offload a side Tipper Truck? Please teach us
Great budy
Nice one 👍
Thanks very much
Can I ask you something. When you going down to the hill you drive automatic or manual. With retada
It depends on how it goes down and the load you're carrying. But the rule says go down by manual
Thank you..... my brother I'm learning. I want to be like you
@@mahlatsetema4276 thanks bro. Slowly but surely you're obtaining experience
Thank you brother
Nice one thanks bru
Kubonga mina🤝
Very helpful 🙏🏻
Thanks🤝
Nice brother
scania r500 2011 model was the last ones that had a retader lever retader(hydraulic braking box on back of gearbox) this G460 has got a automatic sensor than works with the footbrake and accelerator pedal
Thank you amigo