How To Make A Manual Winch | Homemade Powerful Manual Winch | DIY Winch

How To Make A Manual Winch | Homemade Powerful Manual Winch | DIY Winch
Hello Everyone!
Today I show you how to make a manual winch. This homemade winch is a manual operated winch. This diy winch is very powerful. This diy manual winch is very simple to make at home. This diy winch lift is very cheap to make. I used scrap metals to make this diy winch. This homemade manual winch is very small and compact in size. Also this diy winch is less weight so this homemade winch can be very easily portable from one place to another place without any effort. This homemade winch machine is used to lift heavy weight. This homemade manual winch can also be used for heavy duty applications. I used sprockets and chain to increase the torque for this diy winch. I made a ratchet mechanism for this homemade winch. This diy ratchet mechanism is fixed to this homemade manual winch. This diy homemade winch machine may looks simple but it really performs very well. I personally enjoyed myself while making this diy winch build. This homemade manual winch really works good. I hope you guys will enjoy this making of diy homemade manual winch machine build
Click here to SUBSCRIBE Diamleon Diy Builds:
/ diamleondiybuilds
Support me on PATREON:
/ diamleondiybuilds
Social Media:
Facebook: / diamleondiybuilds
Instagram: / diamleondiybuilds
Twitter: / diamleondiy
Contact Mail Id:
[e-mail]
Thanks for watching
Hit LIKE & SUBSCRIBE button
#diamleondiybuilds
#homemadetools
#diytoolshomemade

[@magnoeuripedeslourencodias3025]

Quando for trocar o rolamento do lado da coroa vai ter que desmanchar tudo que fez.

[@user-bk1ft2be9u]

Такие ролики приходится смотреть по два раза, если он заинтересовал тебя, первый раз начало и конец, чтобы понять насколько интересен для тебя результат работы, а дальше пересматривать если интересен.
здесь можно сделать пару усовершенствований, первое. сделать съемную рукоять, и на валу большой звездочки сделать второе крепление рукояти, -- если груз легкий то можно крутить и вал большой звездочки, у меня магазинная лебедка, и рычаг привода не намного длиннее чем рукоять с видео, а лебедка без дополнительной звездочки поднимает более 1000 кг. А так идея хорошая.

[@medianmuhnna7249]

Great job. but long video 🎉

[@DiamleonDiyBuilds]

Thanks man❤

[@davelynn4993]

Very nice design, Good leverage with speed reduction. I've modified a winch that I bought and added a hex nut. The put a socket on a cordless drill and quickly reel in the cable after use.

[@DiamleonDiyBuilds]

Thank you very much

[@user-sh4cl8pj9f]

فنان رهيب عاشت ايدك

[@dimasdasilvamiranda4976]

a idéia é muito boa valeu obrigado Deus te abençoe sempre você e sua família

[@yogabala7443]

Tamil 18:27

[@DiamleonDiyBuilds]

What bro

[@Xmen-tk9px]

I am following you from the country of Morocco. I have a request if you could show us how to make a feed crushing machine. I do not mean grinding it, but to make the size of the feed smaller and thicker so that chickens and chicks can swallow it easily.

[@jimgree]

I like lock nuts also, good to see a job done right

[@DiamleonDiyBuilds]

Thank you very much bro❤

[@JoseCarlos-ip5rc]

Excelente, vou salvar esse vídeo.

[@DiamleonDiyBuilds]

Thank you very much dear

[@joaorosadecarvalho6000]

Parabéns pelo vídeo, muito importante.

[@DiamleonDiyBuilds]

Thank you❤

[@user-vt2ml4du3g]

Можно вечно смотреть на три вещи - как течёт вода, как горит огонь и как работают другие!

[@asressaraia2340]

very practical and useful. Maybe you can do a second one with a small electric motor- detachable ? thank you

[@DiamleonDiyBuilds]

Thank you very much bro❤

[@idecreativ87]

Sangat kreatif dan sangat menginspirasi, terimakasih sudah berbagi

[@DiamleonDiyBuilds]

Thank you very much dear

[@user-qt4tf6xh2g]

It wad interesting,✋🇰🇿

[@vinceianni4026]

Hello mister beautiful idea good job well done

[@DiamleonDiyBuilds]

Thank you very much dear

[@Sandorvalsiepiereki]

Muito bom mesmo.

[@DiamleonDiyBuilds]

Thank you very much bro

[@user-mx3sl4bp8i]

Можно вечно смотреть;
На огонь....
На воду...
И каким образом работают другие люди!!!

[@ArifulIslam-pz1ei]

Very nice

[@DiamleonDiyBuilds]

Thank you very much dear

[@jairomota5825]

excelente

[@DiamleonDiyBuilds]

Thank you very much dear

[@josejohn3006]

Super, strong!

[@DiamleonDiyBuilds]

Thanks man❤

[@hmarvin3791]

Y cuando le quita el seguro como hace para que la carga no se caiga ?

[@leepatton1180]

Nice job

[@DiamleonDiyBuilds]

Thanks man❤

[@Bianchi77]

Creative video, thanks :)

[@DiamleonDiyBuilds]

Thank you very much dear

[@wahidtrafo6009]

I have followed dozens of your creative videos with all the complete extraordinary work facilities, we really like it, thank you for your knowledge, it has inspired many people

[@DiamleonDiyBuilds]

Thank you very much bro❤

[@Ropetangler]

I must say that I prefer some preamble on a project like this. A brief description of what you are doing and what materials, sizes etc involved. I also prefer to have a project which bolts together than one which is fully welded, it makes for much easier changes to design or parts replacement, but having said that, welded construction is quicker (but dirtier), so perhaps there is a place for it.
The fastening of your winch rope is very rough, a wedge and becket would be much better and neater also, even a couple of grub screws would have been better IMHO. Also your rope clamps looked to be installed incorrectly. The U bolt should always go over the rope end which is not loaded, and the loaded end should be fitted to the saddle of the rope clamp. It is good practice to have at least 3 turns left on the drum before any load is applied, better still around 5 turns, so the rope won't pull out of its anchorage as you take up the load. I know that you had more turns on in your demonstration but some of your followers may not be aware of this issue.

[@404nouserinformationfound]

Instead of the cable clamps drill and tap the shaft for a set screw, like real winches.
And the shaft and bearings on the primary side could be reduced in size to decrease cost.

[@mrdash1735]

Good job 👍

[@DiamleonDiyBuilds]

Thank you very much dear

[@joaobatistasevero8205]

Paraben muito bom

[@DiamleonDiyBuilds]

Thank you dear ❤

[@kjmonosr]

nice work what type and brand of cutting wheel are you using on the hand grinder?

[@DiamleonDiyBuilds]

Thanks man❤. I use yuri brand cutting wheels

[@johnbower]

Because you let the welding current pass through the ball race bearings you now need to fit four new ball races :(

[@tuskaghe]

Everyone praises this project, but no one thinks about the danger it presents with great weight.

[@victoraviles5002]

Un cable talves más grueso o un cabo de buena calidad pero igual esta excelente

[@DiamleonDiyBuilds]

Thanks man

[@recepgumus21]

Very Good work.The only problem when lowering the load.You can not lower the load halfway.Otherwise load will drop with high speed. so it is danger,I think.

[@DiamleonDiyBuilds]

Thank you very much bro

[@karimmouhend5899]

💪👍👍👍👍

[@DiamleonDiyBuilds]

Thank you very much dear

[@HariHaran-nk7ji]

Great winch man awesome!!!

[@DiamleonDiyBuilds]

Thanks dude ❤

[@dianatuanama1276]

No lo veo seguro por lo menos 2 o 3 transmiciones lo faltan cuanto mas lento mas seguro porque ai lo sueltas te chanca los huesos de la mano

[@ieatYTP59]

i would use gears instead of the chain, to prevent failure

[@DiamleonDiyBuilds]

Thanks for your suggestion bro❤

[@Mwalaevans]

See dont weld near berings u melt the greese inside

[@alatt9232]

After lifting a heavy weight , how would you control and down that weight?

[@DiamleonDiyBuilds]

I used sprockets and long rotating handle to control heavy weight

[@Guzzi_Cali2]

Very rough design. All welded. Half of these connections could be solved with bolts and nuts. The fixing of the rope with two clamps - NO WAY! Pure flub.

[@TheGoatShowMan]

I think ya needed a little more weld on that one part. 😂

[@DiamleonDiyBuilds]

Which part

[@nguyentudat8202]

Cái này kéo đồ nặng mà muốn nhả ra thì toang hết. Phải thiết kế chiều hãm nhả khi kéo nặng

[@magnoeuripedeslourencodias3025]

Mais uma cagada,o eixo menor ficou todo soldado,trocar rolamento ja era.

[@nazirshaikh5620]

Supar sir

[@DiamleonDiyBuilds]

Ok sir thank you❤

[@rimisyih9051]

Price?

[@user-wh2ug7le8j]

Xin giá

[@RegiPavan]

Can be dangerous when you release the locking ratchet...

[@DiamleonDiyBuilds]

Not dangerous bro. It's very easy to handle

[@joseangelalatorrevelazquez4934]

No estas usando la herramienta correcta

[@user-wh2ug7le8j]

Ib

[@dawnac6453]

There's only a couple of problems with all these DIYs. He doesn't give the dimensions of the metal cuts and widths and other stuff and secondly,,, how many average people has the kind of tools like that lying around to be able to make stuff like that? LOL

[@nancycook3733]

Well I think what this gent is doing is good and it's up to you to decide how big or small that you want to do this hence the measurements, and secondly as tools go use the brain cells and make minor modifications and build it using what u have on hand, myself 3 different welders and different sized grinders so modification away I go, lol, and say instead of welding all together why not drill and bolt it together lol

[@dawnac6453]

@@nancycook3733 yeh well not everybody has a complete STEEL WORKING shop in thier backyards either. I'm not saying he doesn't do good work because he most definately does...but try doing it without all thise mills and lathes and drill presses. That's my point.
The measurements would be a BIG plus... Not just showing a hunk of metal and expecting it to work. I don't build ANYTHING without some kind of measurements. I also have welders but not the fancy ones. Mine is only good for doing small projects. And your bolt and hole theory might work for some stuff... But not all. Just makes things much more complicated.

[@sunil2102]

So if you want to get measurements you have to pay subscription 😅

[@olegpoheretski190]

он даёт нам возможность, когда мы лежим на диване,думать что мы работаем❤

[@dawnac6453]

@@jimmiecharley6505 very good .. GENIUS!!!

[@jassalmedia6877]

Demonstration not clear

[@maxinehardy9411]

im starting to think youll never make an ice cream maker

[@luciancostin1543]

Nu prea va plac șanfrenele în rest 10+

[@albertoaparecidosilvasilva2767]

Não gostei

[@DiamleonDiyBuilds]

Why?

[@albertoaparecidosilvasilva2767]

Tem muitas máquinas no mercado mais eficiente e com preços acessíveis

[@shawnwoods9280]

How much will it lift?

[@highnoter1]

Or you go to hobo freight and by an electric one for $50.

[@TsimnujXyooj]

Good idea sir/

[@DiamleonDiyBuilds]

Thank you very much dear

[@ROVITTv]

Very nice

[@DiamleonDiyBuilds]

Thanks man