@@bringapow_toys2285 to be honest yeh I wish it was more like a wired cloth rather than so I have a better option take it off and have more dynamic poseibility.
oooh, did not know this was happening. Figma vs Buzzmod... the competition is gonna be tight. About as tight as those photos as the end. Awesome as usual good sir.
It's pretty messed up how companies want us to pay over $100+ for a figure that is really worth sometimes half that price. This figure is super overpriced, but heart attack inducing price aside, it's pretty good, the sloppiness of some joints are a gripe but me as a person it never really bothered me that much and the accessories are ok, we should've gotten way more with the price we pay for this figure😂like maybe some water effects and fire effects, hell, we should've gotten an accessory or face template where Tanjiro is breathing in. Either way, these companies are overpricing their products nowadays. Figma is just straight up robbery, giving us all the accessories Tanjiro SHOULD have in a more expensive DX edition and this one pretty much follows with the sloppiness of some joints and the lack of accessories. The correct price for this figure should be about $70-$80 imo.
Figma's been hella overpricing for a long time. It becomes really obvious when you look at some of their old figures that are pretty much the same but cost ~3000 yen and come with a ton of stuff. That said I *think* the price for this is because of the soft goods. They can be really expensive and these are very well done too so I could see just that costing a lot of money.
@@BaileyZKerr Well that's true, that's a reasonable point, im just saying maybe a little bit cheaper, my pocket gets heart attacks faster than Kira's victims looking at these prices😂😂😂in all seriousness though they seem to be raising the price for each figure that comes out, if it were like that, Inosuke should be cheaper since he has no soft goods but instead he is one of the most (if not the most) expensive one!
Gotta say I’m impressed. Aniplex is off to a great start. Glad I pre-ordered this guy. Other than a couple Articulation gripes and that smiling face, I have no complaints.
I hope SH Figuarts adopt this style of knees for their Dragon Ball figures, cause the ones they have now look like complete ass when the legs are bent and are hollowed out almost entirely on the back side so no good looking rear posing either.
Very good review! Although I have the Figma Tanjiro preordered, I’m getting Buzzmod Zenitsu so it was still very helpful in knowing what to expect from these figures.
I think that according to the photos, the Figma version looks to be better, but after I saw the Rengoku aniplex figure I have to go for that one lol. and where did you got the unsheatable version of the sword? I googled Candy toy and it only appeared candy toy sentai on FB
Love your channel bro. You're the first channel I head to for figure reviews. What is your opinion and preference on the Aniplex Tanjiro Vs the Max Factory FigureArts Tanjiro?
This guy looks pretty neat, and his accessory count is fine, but with those antiquated Revoltech shoulders and you saying some parts feel a bit sloppy...I think this figure is overpriced. Sure the effect part is very big, but even so I don't think the over $100 price tag is justified. My patience for the 1/12 scale price creep is wearing real thin.
Definitely overpriced. This figure is pretty nice but I don't believe that it should be 100 or +. Maybe 80 or 90 but def 70. Not $150. That's straight up robbery.
Looks really awesome, ugh one thing i hate is when companies... Specially figma always put the stupid "smiling face" so lame! A "serious face" is always the BEST OPTION!
Great review! Figure looks awesome. Mine is on the way. Any recommendations on a display stand for him? I'm a little bummed out that they didn't include one for how expensive he is.
I was listening to Joe Rogan today and he had Olympic Champion wrestler, Jordan Burroughs on and I’m like why does he sound familiar. My dude sounds like D Amazing. He did grow up in Jersey, so he’s not far from you. 😂
I hate when you can't store your real sword into sword holder. That mean no more samurai post like holding sword partially out of sword holder. And single joint elbow and that knee design, 140$ is not worth it:3 They should make price lower. Even at a price of Mafex is affordable.
I kinda wanna get a revoltech all might but then I kinda wanna get a lebron figure lebron would come in January and all might would come in February also do you know where I can get a background for stop motion vids?
Pro Cow Studios a diorama is like the background he has in his video I don’t know the definition but for example in a stop motion like somebody has the figures in an apartment or something I guess that’s a diorama
@@CrustyMlf usually dioramas come in premade, but real expensive. U can find them on bigbadtoystore or find other manufacturers on other online retailers. The other option is to comission one from a diorama maker on Facebook or Instagram, though these are pretty steep as well for pricing.
This guy looks sick, I’m passing on him though, he’s just way to expensive (340 Australian), I might just wait for figma and just get the hashira aniplex if figma doesn’t make everyone
I’m in the same boat. I like the Figma aesthetic more. However, at least we know Buzzmodd is all in on these Demon Slayer figures. I’ve already got Tanjiro, Zenitsu and Nezuko preordered for Figma. I hope they don’t drop the line before they make more characters 😫😫😫😫😫
@@2736492821 lol I honestly wish I had more restraint. Well I should clarify. I’m hoping that they’re roughly the same scale. Cause I would prefer to just collect the Figma. I’m not buying the Buzzmod versions of the Figma I’ve already preordered. I was just holding out on these new ones (Rengoku, Giyu and Inosuke) cause I want to see if Figma is gonna go that far in the line. I’m afraid they won’t
@@2736492821 but to answer your original question…the Figma looks A LOT better than this one. Of course, we don’t have it in hand. But Figma seems to have nailed Tanjiro’s likeness to the “T”
Should be arriving soon. I can’t wait for this figure. I thought I was done with 1/12 figures. I’m gonna collect all 4. I skip Rengoku. They are expensive.
Rengoku is the best one lol... I would pair him with the Figma ones though, but since on this ones you might be able to get unsheathable swords might be better
Eric Black yeah, it kinda doesn’t fit the other aniplex ones, but it does fit the Figma ones that are all plastic Also, did you know where this man got the unsheathable sword version of this figure? I can’t find anything, for the new ones that will release
I do like how his haori is made of cloth. The figma one is plastic and looks terrible. Very shiny, and you can see al of the joints, and it never lines up.
FR! The cloth's really well done too. Normally in this scale cloth goods are way too big/baggy and the figure gets lost in them but buzzmod seems to be doing it perfectly. I'm pretty sure that's what's causing the price of these figures
I didn’t even know this came out, I thought there was still a few months left😂 so this is a unexpected but awesome video.
I cant wait for the full metal Alchemist Edward Elric one yessir yessir
What about the plastic jacket ? Is that going to be a problem for you
@@bringapow_toys2285 to be honest yeh I wish it was more like a wired cloth rather than so I have a better option take it off and have more dynamic poseibility.
I bought the revoltech one. Pretty cool
oooh, did not know this was happening.
Figma vs Buzzmod... the competition is gonna be tight.
About as tight as those photos as the end. Awesome as usual good sir.
It's pretty messed up how companies want us to pay over $100+ for a figure that is really worth sometimes half that price. This figure is super overpriced, but heart attack inducing price aside, it's pretty good, the sloppiness of some joints are a gripe but me as a person it never really bothered me that much and the accessories are ok, we should've gotten way more with the price we pay for this figure😂like maybe some water effects and fire effects, hell, we should've gotten an accessory or face template where Tanjiro is breathing in.
Either way, these companies are overpricing their products nowadays. Figma is just straight up robbery, giving us all the accessories Tanjiro SHOULD have in a more expensive DX edition and this one pretty much follows with the sloppiness of some joints and the lack of accessories.
The correct price for this figure should be about $70-$80 imo.
Figma's been hella overpricing for a long time. It becomes really obvious when you look at some of their old figures that are pretty much the same but cost ~3000 yen and come with a ton of stuff.
That said I *think* the price for this is because of the soft goods. They can be really expensive and these are very well done too so I could see just that costing a lot of money.
@@BaileyZKerr Well that's true, that's a reasonable point, im just saying maybe a little bit cheaper, my pocket gets heart attacks faster than Kira's victims looking at these prices😂😂😂in all seriousness though they seem to be raising the price for each figure that comes out, if it were like that, Inosuke should be cheaper since he has no soft goods but instead he is one of the most (if not the most) expensive one!
Even tho I don’t collect figures anymore, I still watch d amazing’s vids. Love everything about them boss keep it up!
Hello! New to your channel! I LOVE Kimetsu No Yaiba! I cant get over the dot eyes facial expression it comes with!! How cool!
Gotta say I’m impressed. Aniplex is off to a great start. Glad I pre-ordered this guy. Other than a couple Articulation gripes and that smiling face, I have no complaints.
Where did you pre order yours from
I do really like how they did the brown highlights in the hair
I hope SH Figuarts adopt this style of knees for their Dragon Ball figures, cause the ones they have now look like complete ass when the legs are bent and are hollowed out almost entirely on the back side so no good looking rear posing either.
Nice man 💯 I just started getting into demon slayer, it’s so sick.
Very good review! Although I have the Figma Tanjiro preordered, I’m getting Buzzmod Zenitsu so it was still very helpful in knowing what to expect from these figures.
Price I way too high. It is a decent fig tho but dat price ain’t justified
Parts swapping aside, I do like how they did the legs. Knee joint looks really clean
Cloth looks good, almost look like a hard plastic robe
I saw on facebook that you can change one of the legs with the already folded ones for more dynamic looks to mimic the extreme double jointed knees
I think that according to the photos, the Figma version looks to be better, but after I saw the Rengoku aniplex figure I have to go for that one lol.
and where did you got the unsheatable version of the sword? I googled Candy toy and it only appeared candy toy sentai on FB
Ehhhh.... i think ill wait for the figma. Sweet articulation though.
Why
@@cy4182 I mean...they probably thing the Figma looks better? I personally agree as well tbh.
@@cy4182 it partners with figma nezuko, dx comes with chibi nezuko and gsc bonus is his mask.
look forward to seeing Zenitsu buzz mod👍
Love your channel bro. You're the first channel I head to for figure reviews. What is your opinion and preference on the Aniplex Tanjiro Vs the Max Factory FigureArts Tanjiro?
The articulation looks a lot like Amazing Yamaguchi revoltech... and that's DOPE
I have this fig and i love it the reason i chose this over firgma its simple the cloak and the wood box
Great Review as always!
This Figure Is Pretty Good I Love The Figures Design And Tanjiro….He Is My Favorite Demon Slayer Character 😊
This guy looks pretty neat, and his accessory count is fine, but with those antiquated Revoltech shoulders and you saying some parts feel a bit sloppy...I think this figure is overpriced. Sure the effect part is very big, but even so I don't think the over $100 price tag is justified. My patience for the 1/12 scale price creep is wearing real thin.
Definitely overpriced. This figure is pretty nice but I don't believe that it should be 100 or +. Maybe 80 or 90 but def 70. Not $150. That's straight up robbery.
Great content. I can't wait to get my Tanjiro in hand.
Demon slayer is one of the best shows
Yet another line Damazing has sucked me into lmao
Looks really awesome, ugh one thing i hate is when companies... Specially figma always put the stupid "smiling face" so lame! A "serious face" is always the BEST OPTION!
Great review! Figure looks awesome. Mine is on the way. Any recommendations on a display stand for him? I'm a little bummed out that they didn't include one for how expensive he is.
Which one is more accurate? buzzmod or figma?
I didn't see any of the gripes he was talking about. This figure is dope!
That fire effect will look awesome with the Figuarts Dr. Strange
I had this before they made this video and the Deku there reallly cool
My main problem with this one is the price is insane!
how much was it there in your region? here sells it 100 bucks
@@glentaker like 150 in the US
Reviw perfeito 🤩👏👏👏👏👏👏👏
Great video!! Is the brown section of the suit molded colored plastic or painted?
What do you think Buzzmod Tanjiro vs Figma Tanjiro? Which one is more value for price? Thanks!
Those shoulder joints do look iffy.
I know this is off topic but can we see a review of lightning collection MMPR Blue ranger (Billy) please?
The way you said he had a big head 😂 😂
did you guys all watched Demon Slayer anime (including theatre version)??
Hey sir, may i know what actiom figure that stand on the left side of tanjiro... The black and purple one
I was listening to Joe Rogan today and he had Olympic Champion wrestler, Jordan Burroughs on and I’m like why does he sound familiar.
My dude sounds like D Amazing.
He did grow up in Jersey, so he’s not far from you. 😂
Will the Figma face plate fit on the Buzzmod head?
Buzzmod just showed off Giyu Tomioka. Thats most prob where you can get the water effect parts.
I need him in life
I hate when you can't store your real sword into sword holder. That mean no more samurai post like holding sword partially out of sword holder. And single joint elbow and that knee design, 140$ is not worth it:3 They should make price lower. Even at a price of Mafex is affordable.
I kinda wanna get a revoltech all might but then I kinda wanna get a lebron figure lebron would come in January and all might would come in February also do you know where I can get a background for stop motion vids?
Do you mean like dioramas?
@@Ladron.Baudelaire I feel like I know what you’re talking about can you explain it?
Pro Cow Studios a diorama is like the background he has in his video I don’t know the definition but for example in a stop motion like somebody has the figures in an apartment or something I guess that’s a diorama
@@Ladron.Baudelaire ok the I knew what you were talking about so yeah where can I get one?
@@CrustyMlf usually dioramas come in premade, but real expensive. U can find them on bigbadtoystore or find other manufacturers on other online retailers. The other option is to comission one from a diorama maker on Facebook or Instagram, though these are pretty steep as well for pricing.
I tried to pull the handle out of he cover and it just broke for me
i need this in my life
This guy looks sick, I’m passing on him though, he’s just way to expensive (340 Australian), I might just wait for figma and just get the hashira aniplex if figma doesn’t make everyone
y does your area have somany siren going on. sounds chaotic
Which version comes with sheathable sword ?
my friends nephew broke his tanjiro so I asked him for the effects piece and ima just paint it blue for a water effect
It took me 3 demon slayer watch throughs to figure out the reason they didn’t go with the sheathed sword is because his sword breaks so much!
what is the candy toy version sword?
Its not fire breathing its the hinokami kagura AKA dance of the fire god.
I just wish I had the money to get this 🥲
Yo you da best
Damn I can’t decide between this and Figma
Go for figma dude
Arthur 101 yea I think that’s what I’m gonna do. The expressions look so much better on it and the price is cheaper with more accessories.
I really hope we get a Giyu Tomioka!
Single knee joints look better and a good example is dbz sh figuarts. When they do single knee it looks way better aesthetically.
👀 I have that sword 1/12 scale I gave it to drakkon 👀🍿
still torn between getting this or figma, thoughts?
I’m in the same boat. I like the Figma aesthetic more. However, at least we know Buzzmodd is all in on these Demon Slayer figures.
I’ve already got Tanjiro, Zenitsu and Nezuko preordered for Figma. I hope they don’t drop the line before they make more characters 😫😫😫😫😫
@@ekwrestling so you are collecting both lines? deep pocket there ;) I primarily focus on mixing the lines
@@2736492821 lol I honestly wish I had more restraint. Well I should clarify. I’m hoping that they’re roughly the same scale. Cause I would prefer to just collect the Figma. I’m not buying the Buzzmod versions of the Figma I’ve already preordered. I was just holding out on these new ones (Rengoku, Giyu and Inosuke) cause I want to see if Figma is gonna go that far in the line. I’m afraid they won’t
@@2736492821 but to answer your original question…the Figma looks A LOT better than this one. Of course, we don’t have it in hand. But Figma seems to have nailed Tanjiro’s likeness to the “T”
@@ekwrestling yup I agree! I bought nezuko-buzzmod and tanjiro-figma ;)
Where did you order yours from? I ordered mine on bbts but I haven’t gotten any notifications about it yet.
What candy toy version did the second sword come from ?
did you found out?
Kamaboko gompachiro
It’s still not out 😭
Are u gonna get the figma one?
HOW DID U GET THIS EARLY AND FROM WHERE?!?!?!?!?!?!!?!??!
Should be arriving soon.
I can’t wait for this figure. I thought I was done with 1/12 figures. I’m gonna collect all 4. I skip Rengoku. They are expensive.
How about giyu? I heard he's in the works
@@bringapow_toys2285 I only know Inosuke is coming. Nothing for Shinobu and Giyu.
Rengoku is the best one lol... I would pair him with the Figma ones though, but since on this ones you might be able to get unsheathable swords might be better
@@Kobk.e He’s cool but they are expensive figures. 4 is enough for me. And I really wished Rangoku has cloth cape, not plastic.
Eric Black yeah, it kinda doesn’t fit the other aniplex ones, but it does fit the Figma ones that are all plastic
Also, did you know where this man got the unsheathable sword version of this figure? I can’t find anything, for the new ones that will release
Damn how come it’s so expensive
13 vote downs from Kizuki members
Then take your advice, and practice more with your figure, so you don't have to be to nervous. :)
I do like how his haori is made of cloth. The figma one is plastic and looks terrible. Very shiny, and you can see al of the joints, and it never lines up.
FR! The cloth's really well done too. Normally in this scale cloth goods are way too big/baggy and the figure gets lost in them but buzzmod seems to be doing it perfectly. I'm pretty sure that's what's causing the price of these figures
The face is good. But the cutting on the joints looks awful
Is the difference between buzzmod and the 1:8 one just different poses or the materials are better on the 1:8