Tips and Tricks: Part 3 - Modeling Techniques Using Tekla Structures

Поделиться
HTML-код
  • Опубликовано: 14 дек 2024

Комментарии • 35

  • @byamcaravanner
    @byamcaravanner 5 лет назад

    CS, As a long (l-o-n-g) time 2D Autocad Steel Detailer now challenged with the daunting task of learning (and becoming productive with) Tekla Structures, I REALLY!!! appreciate the content of your videos ...and also the humor with which you present them. Towards the end of the work day I set aside all the "middle clicking", not surprisingly done with a middle finger (which many times has been the finger I am motivated to deploy!) Seriously, I take some time to spend watching your videos. Along with VERY helpful information that is presented in a way that conveys the complete and proper information to actually accomplish the TIP/TRICK, your affable nature and cleverness has given me a good laugh... right when I needed one... I'm sure you've been there! Cheers and Thanks!

  • @KaderKader-pb3eg
    @KaderKader-pb3eg 3 года назад +1

    many thanks

  • @teamnoble9715
    @teamnoble9715 5 лет назад +2

    miss your videos. i have started streaming my daily work over a twitch (precast modelling) your videos gave me the courage to go ahead and share my daily grind. hopefully people will get something from it.

    • @CSWilsonDraws
      @CSWilsonDraws  5 лет назад

      That's awesome! I'm glad to hear that! I'll have to check them out. Keep up the good work!

  • @jim_mb2504
    @jim_mb2504 5 лет назад +1

    Thanks a lot CS! waiting for new tips & tricks ...

  • @fernandobonis8678
    @fernandobonis8678 4 года назад

    Thanks for this video! please, share more of them!!

  • @MKas5
    @MKas5 4 года назад +1

    Good... Video.
    Thanks alot

  • @3dsdgacc788
    @3dsdgacc788 6 лет назад +1

    Thanks for your efforts making videos. Great work, enjoyed every time.

  • @nguyenthanhtung5687
    @nguyenthanhtung5687 6 лет назад +1

    Great Video CS. Thanks for your share.

  • @AhmedSalah-vy8vn
    @AhmedSalah-vy8vn 6 лет назад +1

    Great Video,keep it up waiting for the next video

    • @CSWilsonDraws
      @CSWilsonDraws  6 лет назад

      Thank you! I'm always working on the next one. :)

  • @teamnoble9715
    @teamnoble9715 6 лет назад +1

    Super video. Just as informative as ever with that great dry whitty charm

    • @CSWilsonDraws
      @CSWilsonDraws  6 лет назад

      Thanks! Nice to know that someone out there gets me. :)

  • @nileshgawade7816
    @nileshgawade7816 6 лет назад +1

    Nice Wilson.... keep it up......

  • @sakthivel300
    @sakthivel300 6 лет назад +1

    nice video wilson

  • @EggsyUnwin007
    @EggsyUnwin007 3 года назад +1

    I got a big laugh 😂 at "Nuclear capability" . nice

  • @FrenchmanontheRooftop
    @FrenchmanontheRooftop 6 лет назад +1

    Thanks.
    That shift to remove dim points will save me a lot of time since I regularly miss click

    • @azmat_waseem
      @azmat_waseem 6 лет назад

      Waiting for your videos....

    • @robiekotlety
      @robiekotlety 6 лет назад +1

      If you "miss click" press "Backspace" which stands for "Undo last polygon pick".

  • @MrBuffterfly
    @MrBuffterfly 6 лет назад +2

    Very useful. Can you make video about component link to excel ? My idea is set an auto connection with standard in excel file ? Could be work ? thanks you.

  • @shefypattambi
    @shefypattambi 6 лет назад

    Hi, your drawings are looking neat and clean. what is the name of the font that your are using and the size?

  • @oldplayer8025
    @oldplayer8025 5 лет назад

    great video, I suggest you put timelines on each subject you're discussing

  • @pawegawe7129
    @pawegawe7129 6 лет назад +1

    What an acting :) - good job Wilson

  • @gabrielfranco3598
    @gabrielfranco3598 5 лет назад +1

    Hello CS, thank you for your very useful videos.
    I wonder if you have any insight on the following issue: I have a custom component whose variables work perfectly fine in the custom component editor, but when I close it and try to modify the input values in the dialog box, some of the variables (that still work in the editor) do not work.
    Have you ever experienced that problem?
    Again, thank you and congratulations for the high quality content.

    • @CSWilsonDraws
      @CSWilsonDraws  5 лет назад

      Thank you, I appreciate the positive feedback!
      As far as your question, I'm not very familiar with custom components since I haven't used them. I'm sure you could get that question answered on the Tekla forum, though.

  • @АндрейОгир-ч1н
    @АндрейОгир-ч1н 5 лет назад

    Hello, I have a one question:when I using a ASCII symbols then they are not visualised at the text? May be need to set someone of advance option?

  • @MrHegebala
    @MrHegebala 6 лет назад +2

    Hello,
    May I ask what resolution you have on your monitor? Everything looks so small. Is it 4k?

    • @CSWilsonDraws
      @CSWilsonDraws  6 лет назад

      4K (3840x2160). I use a 43" 4K monitor, so everything is easy to read on my end.

    • @MrHegebala
      @MrHegebala 6 лет назад

      @@CSWilsonDraws do you use 3 pieces 43' monitor?

    • @CSWilsonDraws
      @CSWilsonDraws  6 лет назад

      No, I don't have enough room for that. :) I have a 43" 4K in landscape and a 32" 4K in portrait.

    • @MrHegebala
      @MrHegebala 6 лет назад

      @@CSWilsonDraws Thank you very much your answers. I really like to see your videos. I like your humor and you have very useful advises.

    • @CSWilsonDraws
      @CSWilsonDraws  6 лет назад

      Thank you! You might also like my second channel: ruclips.net/channel/UCm4-Bag1EBvyNM3h880F88w

  • @normanstark7367
    @normanstark7367 3 года назад

    Single parts and assembly drawing out of the box settings
    The dimension colour is Green how you do change it to black, so it does it automatically when you
    Run the drawing process

  • @azmat_waseem
    @azmat_waseem 6 лет назад +1

    Xecellentoo....

  • @alexandrerodrigueslima1399
    @alexandrerodrigueslima1399 6 лет назад

    I am feeling fool for have bought a 3d mouse (spacemouse)