BMW K1110 LT Rebuild Part 1 The disassembly
HTML-код
- Опубликовано: 13 июл 2021
- In this video series, we're rebuilding a 1993 BMW K1100 LT
Check out the channel updates on:
Instagram: / restorationvalve
Tiktok: / restoration_valve
Check out the eBay store for the spare parts from the projects: www.ebay.com/usr/restoration_...
Дякую за настільки якісний гайд по розборці мотоцикла. Дуже потрібна і цікава інформація. Успіхів!
Thanks very much for the very detailed documentation as jt helps a lot!!!
Very interesting. Thanks for sharing!
You did right up until you started it after adding new fuel. At that point you should have replaced the fuel filter then flushed the system by disconnecting the return line and dumping fuel until all traces of old fuel was gone, if the tank was clean. If the tank was contaminated with debris, you would have needed to pull the tank, fuel level sensor assembly, cleaned it all out replaced the fuel lines in the tank and installed a new sensor float. Cleaned the injectors, then started the bike. If it had been run in the last year. If longer you should have verified the engine was loose by hand turning it over before you attempt a startup. If it were locked up you could have snapped the starter. Pulling plugs and rotating the rear wheel would have been the right approach if it hadn’t been started in more than a year.
Un autentico maquina .
Good job
I l’île thaïs vidéo thanks you ( french guys)👍👍👍👍✌️✌️✌️
Just servicing that clutch is a pain in the butt...
Excellent sa permet de voir où se trouve les éléments et comment démonté celle-ci 👍
A W E S O M E !
🤟
wierd question but i just bought one of these from a guy who had it in storage for 100 bucks. its a little beat up with 44k miles on it, he said it ran when he stored it. this vid is gonna help me a ton, is there a list of tool i might need for all of these things you did?
Hello, I watch your videos on RUclips. I will buy a torque wrench for the K1100lt motorcycle engine.
Quick question. I have some trouble with my Dr650rs not starting en hoped u might have some tips. Is there a way I could contact you? I don’t know why it won’t start
What a bike, what is the plan? Rebuild entire bike or? Very cool looking bike.
hi,have you got maybe full details electrical diagram to clock(speedometer,tachometer )i want replace and mount new one.thanks
does this have a transponder for the ignition thanks
lord, should of given her a full service , and drive on.. K11s are designed to out last us..
Made me laugh at "the spark plugs didn't look great"...
Music killed it for me...😶