Air Sparge and Soil Vapor Extraction Environmental Remediation Trailer Test Video 6040

Air Sparge and Soil Vapor Extraction Environmental Remediation Trailer Test Video 6040.
The air sparge equipment includes a refurbished Busch MM1142BP Rotary Claw Air Sparge compressor producing 100 CFM and 31 PSIG. A refurbished Xchanger aftercooler cools the air from the compressor. High Temperature and High Pressure safety switches are installed in the main air sparge line. The air sparge manifold includes 4 electrically actuated motorized ball valves each with a 3 position switch to allow manual open, manual close, or an automatic timing control via a programmable IDEC smart relay. There are a total of 18 air sparge manifold legs each with a brass ball valve, pressure gauge, rotameter, and pipe connection through the trailer wall.
The soil vapor extraction equipment includes a refurbished Rotron DR979 Regenerative Blower with 20 Horsepower motor, inline 6" aluminum air filter housing, 3" vacuum relief valve, 120 gallon aluminum knockout tank with low level, high level, and high level alarm floats that operate an Ebara transfer pump equipped with a bag filter, carbon vessel and flowmeter prior to discharge. The SVE manifold header includes a low vacuum alarm switch which is interlocked to the air sparge compressor operation to prevent possible vapor intrusion caused by sparging without vapor extraction. The SVE manifold has 4 manifold legs each with a ball valve, vacuum gauge, sample port and pitot tube style flow meter. The SVE exhaust line includes a pressure gauge, temperature gauge, sample port, pitot tube flow meter and an exterior exhaust stack that reaches 20 feet above the ground surface.
The interior of the trailer is wired for a general industrial (non explosion proof) location as the contaminant of concern for this system does not require explosion proof equipment. The trailer interior includes overhead lighting, thermostatically controlled exhaust fan and heater.
The control panel is a relay logic control panel with UL 508 certification. There are TECO Westinghouse VFD's for both the air sparge compressor and SVE blower. A Sensaphone Sentinel 4G LTE Cellular Telemetry system is included for remote alarm notifications as well as remote system on/off control via a master control power relay toggle.
This system was custom built to our customers specifications in our Pineville NC facility. Email us at [e-mail] if you need a quote on a remediation system or visit our website at www.enviroequipment.com.