How to setup Gridseed Blade 5200kh/s ASIC Scrypt Miner
HTML-код
- Опубликовано: 24 сен 2024
- Driver Download:
www.mediafire.c...
Bfgminer Software
www.mediafire.c...
Buy the latest bitcoin or litecoin miners here:
www.eyeboot.com
www.ebaystores...
www.amazon.com...
Thank You, You Helped Me Many Year's Later.
Any help on links to the software version and bat file configuration would be greatly appreciated
Thank you, it helped a lot!
Is this low rate just because this is old? I am mining on this computer while watching this with one GPU and getting 35-40 MH/s.
the noise of the blade was driving me nuts so I added some tiny heat sinks to power convertors and the inducer and put a lower speed fan at the front and a quiet one blowing on the back of the board where any heat problems will show up.
As the blade is only designed for script mode the gridseed chips don't get hot at all so what I have done is more than adequate cooling and far more peaceful.
cpc.farnell.com/fischer-elektronik/ick-smd-a-5-sa/heat-sink-for-smd-123-c-w/dp/SC10770?in_merch=Featured%20Products
The back of the board runs hot even in standard mode so don't try the overclock imop
Nice modification!
brian whittle
I as well could not stand the noise coming from it. Not only was it loud, but the fan was partially defective, making a nice churning noise (still pumped tons of air.) I went and threw a Noctua 92mm fan in it's replacement and all is happy as can be, can't even hear it now, and still runs cool.
Leon Corsav If you have not put little heat sinks on the three voltage regulators and the big inducer it may overheat, the input cap is a weak link too
brian whittle can you point me this problem, what heatsink and where are those voltage?
How many lite coin can 2 gridseed generate per day
are u install win 7 32 or 64?, cause i'm install to win 7 64 can't work the drivers
Hi Ive added more gridseed blades, but one board (and it switches if i reboot) shows hashing down at 1.2mh all 5 others show normal hashing up to a 2.6-7mh ish.
I am using bfgminer.
There is all so something else recognised OCL: 0 ? sometimes it runs sometimes it doesn`t?
Any advice is welcome.
Where is the video for wiring the power supply?
I've downloaded the Bfgminer software, but keep reading warnings on websites to make sure BTC mode is turned off (for Cgminer). can you tell me if the Bfgminer download has this mode turned off please ?
Please help! I followed the instructions in your video and have one gridseed blade working. My other gridseed blade is not showing up at all. The unit that is working is hashing at a slow rate. Please help me!
*****
It sounds like the connector on the other blade my be faulty. Contact your supplier and ask them to replace/repair.
Probably your gpu is probing, happened to me so I disabled it
I have tried to download but not mine anything. I'm lost with my machine.
What mean well you use?
Alex Conklin, it could be you have the freq too high. Lower that and it should lower your HW errors too.
Hi friend. Do you have the files to mine with this machine? I need them and I did not get them. There are els, you can help me, I've been with my miner stopped for more than a week.
I have just scored a Gridseed Blade Miner Litecoin Scrypt ASIC Mining Machine on ebay for 150 bucks. I have a lot of Raspberry Pi 3 B's on hand. Will I be able to use this miner with that Pi?
Thanks It's worked
hi, I will begin mining Scrypt Coin, i have a question as yields on dollar per month a blade of 5.2 Mhz
But How Do We Mine For Ourself
One of my miners has 14 HW errors while the other has none. How can I fix this? I have very minimal knowledge of mining, so i do not know how to rectify this... This is 14 errors within 12 minutes too. Brand new miner. Help!
Jon O'Sullivan, the software in these links has dual mode turned off by default. Do not worry.
how the Gridseed Blade 5200kh/s ASIC Scrypt Miner work in cointellect ??
hi, have you ever seen one of the boards that shows a hash rate yet no shares are accepted? also i found that the board in the blade that does not accept shares emits a clicking sound around the power connector area when plugging, it eventually goes away but still no accepted shares. an ideas? thanks
Hi Colin, i did have this problem before. It is a zombie board. Usually they do find shares eventually. In the end, i took mine apart (just unscrewed all the screws and took off the heatsink) and open the two boards. Gave it a blow and made sure nothing was lodged in there. Then put it back together and it worked again!
how to use 4 pool for in one gridseed blade miner? ?
I got mine last night and have been running for a couple of hours now. I can't get it above 1.8 mhs per board. I can't get it to work on Cgminer and this is the first I have used Bfgminer. Where do you find the temperatures on Bfgminer? This is my bat file, am I missing anything?
bfgminer.exe --scrypt -o stratum+tcp://us.clevermining.com:3333 -u 1CEh6uexCy3MGhwPBf4CLapxC936SirMUE -p x -d gridseed -S gridseed:all --set-device gridseed:clock=850
Hi ! I have 4 Gridseed Blade 5200 kg / s ASIC Scrypt Miner. I want to use Raspberry Pi and bfgminer or cgminer. But I do not know how to make settings. Please, can you help me !? Thank You!
im running the gridseed 5, and the gridseed blade on different raspberry pi's, i would like to put them all on one Pi, how would i do this....the 5's are using cpu miner, and blade is using bfg miner....
I use minera, didn't mention that. thanks
RJ Shoemaker Use multiminer: www.multiminerapp.com/
friend i need configure it on a wiibox 9331 controller, you have some tutorial ou tips? or model ?
What speed are you running at, 800 or 850 like you do with the little gridseeds?
the blade will run at 850 with an hardware error about every 6 mins per the 2 boards
Could it help install and configure on windows 10?
Hello Eyeboot i had a question: is it possible to mine with gridseed blade AND a normal gridseed at one rasberry pi?
Yes it is. I have done it before. Just make sure you have commands for both in your batfile. Post it here if you need any help.
is this machine support algo sha256?
tche a 5 anos atras nem o site do pool da configuracao do minerador eziste
спасибо!
How do you get bfg miner to not use the GPU that's on my system? I can't play games while I mine when using my blade, just curious if there's a another command I can put into the .bat file to tell it to use ONLY the Blade?
Try adding --disable-gpu to the bat file. If that doesn't work then do this: while bfgminer is running If you press M (manage devices) and select the GPU and press D then it will disable it.
Eyeboot
Both worked like a charm, thank you much!
can you please show whats inside your bat file. Also if i want to use it on my GPU rig where its currently mining n-scrypt coins using 3GPU via sgwatcher on vertminer. Do I need to add something in this bfgminer bat file so that it will not use gpus at all.? cheers
trying on laptop first but I cant make it work. windows 7x64. Drivers installed and it shows in com ports as COM5 and 6. and I keep bat file for this bfg miner as by default only changed my pool. and user.
Bfgminer -S gridseed:all --set-device gridseed:clock=850 --scrypt -o stratum+tcp://us-east.multipool.us:7777 -Bdv85listru.1 -p x
but miner only blinks for a second and nothing starts. what could be a problem?
Sorry for the late reply. Try this: bfgminer.exe --scrypt -o stratum+tcp://us-east.multipool.us:7777 -u yourworker.1 -p password -d gridseed -S gridseed:all --set-device gridseed:clock=850
Make sure you have reinstalled the virtual com port driver. Add --disable-gpu or -G to your batfile if you want to disable the graphics cards in bfgminer.
hello the start mining .bat file is opening and closing immediately what should i do ??
kadiyala jaswanth right click on start mining.bat and modify it to your pool and username and password. Then double click the same file and your mining
There is no video for power supply he dont answer on my email either
do you have an image file for it???
Will this work the same on ubuntu
How loud is this compared to a 5 chip device
about the same really...maybe a little louder. I bet you could modify the fan quite easily if it were a problem.
Where's the video of how to wire it?
Hi Eyeboot team,
Why you don't use CGminer? also, Is double hash mode disable by default? If not, how you can disable it?
Take away the -dual command in your batfile and add --scrypt
I use cgminer and bfgminer as necessary, both work better with certain types of miners.
to be profitable at least using how many g
good
how many of these can a raspberry pi support?
Around 28-32
I would really appreciate it if you can send me the latest bfg software download
what the new version of Bfgminer Software and im new for minning and i have 2 pcs of this with rapsi berry
how's the status of your mining bro using that device?? did you your earn??
Why are you getting so many HW errors? it shows 7 and 2.
3-6% is quite normal for most miners
Raspberry Pi Model B+ (new version with 4 usb ports) Mini Computer/Mining Controller, Buy here now:
Eyeboot (Cheaper)
www.eyeboot.com/Bitcoin-miner-Accessories/raspberry-pi-model-b-plus
Ebay
r.ebay.com/qqkVFR
Hi, what is your USB Hub brand name? I like to buy it..
Hi, it is the Eyeboot 49 Port Hub. You can buy it hear:
www.eyeboot.com/49-port-usb-hub
Normal price is $160 usd. This month there is a sale for only $120 usd per piece
My friend, could you tell me a website or a secure seller of this board?
Marcos Vinicios AMAZON
hi the bat file did not work even after the username and pass
+patrick darrough add the line: pause
to your bat file. See what error comes up and remove it.
hello friend you can teach me how to set the g-blade in raspberry
follow the instructions on the litecoin forum here: archive.litecointalk.org/index.php?topic=18951.0
whats the name of the USB HUB?
+Andres Giraldo Eyeboot 49 Port USB hub:
www.eyeboot.com/49-port-usb-hub
ola amigo voce pode me ensinar como configuro o g-blade no raspberry
follow the instructions on the litecoin forum here: archive.litecointalk.org/index.php?topic=18951.0
is gridseed g-blade works on clevermining.com ?
Yes it does.
PLZ hellp how to setup Gridseed 5 chip Scrypt Asic Miner CGMiner
+cristian leonte just plug them in, it will automatically detect them
i tried to download bfg miner and antivirus blocked it >>
anti virus will block all miner downloads. you may have to disable the Antivirus temporarily.
can gridseed blade mine script-jane ?
no only scrypt
about how much a month I can make with this thing mining litecoins.
Going off the calcs about $340 a month but you probably would be betyer mining doge
Going off the calcs about $340 a month but you probably would be betyer mining doge
newby 08 why doge coin?
Marco Casas it is more profitable than litecoin use the website give a good idea of what to use www.coinwarz.com but some of the coins fluctuate a bit. doge is usually very steady an 9 times out of ten will be more profitable than litecoin to mine you could always then change it on an exchange like cryptsy
newby 08 ok I am mining dogecoin to give it a try. Is it better to have the money on cryptsy or basecoing to exchange my BTC?
Hi Eyeboot team,
Can you share your bat file?
Sure, what do you want it for? 1 miners or multiple? and which software bfgminer or cgminer?
Can you share your .bat file configuration?
Bfgminer I was using from (cryptomining-blog.com/1396-download-bfgminer-3-10-0-for-windows-scrypt-mining-on-gridseed-5-chip-asics/) seems to be giving me low hash speeds on miner AND pool's.
Only getting 1.55Mhs per board with bfgminer
hello friend you can teach me how to setup the g-blade in raspberry
follow the instructions on the litecoin forum here: archive.litecointalk.org/index.php?topic=18951.0
come back and make more vids for us