How to Make DIY Arduino Line Follower Robot Car with Arduino UNO, L298N Motor Driver, IR Sensor
HTML-код
- Опубликовано: 13 сен 2020
- In this tutorial, I will show you How to Make DIY Arduino Line Follower Robot Car with Arduino UNO, L298N Motor Driver, IR Sensor Module with Code included.
Grab the Great deals in Next PCB Mid Summer Sale:
www.nextpcb.com/midsummer-sal...
Subscribe It's Free / @makediy9
Arduino Code & Schematics: amzn.circuitbest.com/my-gears...
bit.ly/38eYHYK
Note: You must detach the GND and the +5V wire before uploading the code to the Arduino.
Things Needed to Make DIY Arduino Line Follower Robot Car:
Amazon.in Links:
IR Sensor: amzn.to/2TaSsfZ
Arduino UNO: amzn.to/31sEgU4
L298N Motor Driver: amzn.to/37qwcqE
TT Gear Motor: amzn.to/2FLFeTF
Jumper Wire: amzn.to/2HqWHBb
18650 Battery: amzn.to/34hsldt
2S, 18650 Battery Holder: amzn.to/2TdA1XY
65MM Wheels for TT Motors: amzn.to/31rrghv
Soldering Iron: amzn.to/2HldvtF
Glue Gun: amzn.to/3mcr51m
Amazon US Links:
Arduino UNO R3: amzn.to/2SuROJC
TT Gear Motor: amzn.to/3nf4l29
Wheels: amzn.to/30zkFRI
HC-05 Bluetooth Module: amzn.to/36w2DU5
18650 Battery Holder: amzn.to/34nOVA6
18650 Battery: amzn.to/36EeUWu
L298N Motor Driver: amzn.to/3cVTRQC
L293D Motor Driver: amzn.to/3ng7Xks
Switch: amzn.to/3ivaUdw
Jumper Wires: amzn.to/3izMFe2
IR Sensor: amzn.to/3iE6MIh
Banggood Links:
Arduino UNO R3: bit.ly/2FZY6dT
TT Gear Motor: bit.ly/2Mlb35E
Wheels: bit.ly/2U10QPM
HC-05 Bluetooth Module: bit.ly/2ukQvod
18650 Battery Holder: bit.ly/2MkPYrW
18650 Battery: bit.ly/3eBNH7N
L298N Motor Driver: bit.ly/3gB8Ws6
L293D Motor Driver: bit.ly/2CHPqdT
Switch: bit.ly/3ds4Xfy
Jumper Wires: bit.ly/2MjLy4t
IR Sensor: bit.ly/2E1PsP2
Thank you so much for watching the video. Please hit the like button it really motivates me a lot. And also don’t forget to subscribe for more amazing Arduino related content.
Do you have any queries about the Arduino Project? Then do let me know about that in the comment section.
Music Used in the video:
Track: Perspective - IVAAVI [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Perspective - IVAAVI |...
Free Download / Stream: alplus.io/Perspective
Freedom - Atch / atch-music
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/al-freedom
Music promoted by Audio Library • Freedom - Atch (No Cop...
#ArduinoLineFollowerCar #ArduinoProjects
#ArduinoSmartCar #DIYProject #ArduinoProject 
Хобби
Here is the code Link: bit.ly/38eYHYK
Enjoy :)
Dear sir.. thanks for the code. The "amp" error appear. Can you help why? And how to solve that?
Please try it one more time
does your code need additonal lib? cuz the `&` doesnt declared yet
seems like you mean ` && ` (and logic gate)
@@MakeDIY9jk
can you put the coding of this car
Exactly what I was looking for. No need of opening the serial monitor, just simple calibration and you are good to go.
Thank you so much for the video.
Subbed!
Great to hear!
THANK YOU BRO!For my science exhibition, I made a line follower robot based on your vidio . I followed your methods. Finally I did it! And I got first price! GOD BLESS YOU ❤️
did you know arduino programing from early on?
had trouble finding circuit in other youtuber car but you gave the circuit thanx alot thankyou
You are welcome :)
Don't forget to subscribe
Thank You So much SIR !! It was really really Helpfull 🖤🖤💯
You are very creative 👍❤️❤️❤️
Thanks you are great
you are perfect man👌
Excellent and quality content , Dear can you please tell me how to run this car smoothly at lower speed .. No battery drain issue and no lags on motors.. hope u getting what m trying to say ..
Video quality is so good. I Appreciate it ♥️ thanks for putting this video out on the internet for confused souls like me.
Glad you enjoyed it!
Very cool project !
the effort that has gone in editing this video... Damn. Great Job!
Thanks Man 😄
Heyy can you share the circuit digram please. Btw superb explanation and great work . Thankyou
you are osm tq so much:)
How does the car move left and right based on IR sensors? Can you explain please
Good job bro
Keep creating 👍👍
😊
what should we check if only left tyre is moving while the right one is not? both sensor detect but only the the left one is function
Nice!
Thanks for this!!
Our pleasure!
Can we fix a 9v battery instead of that 2 rechargable batteries??
very nice
Use fully
good project i love it
Thank you so much😊
do we need to change the code according to the path???? or this code is set for all path?
Can we do the same with aurdino nano
Superb project!👊
I only have an RFID instead of IR sensor, how do I do mine?
Thanks in advance guys!
How much voltage motors are they?
Hi if we use powerbank instead of batter will the car move..?
Could you please provide the link for GND and +5v wire
I am using a TCRT5000, what would the connection be like?
Library konsi use ki hai
How to control each motor individualy?
Can I use l shaped bo motor
can we make it with L293n motor driver
Sir this line following robot is followong a black line . Instead of black line can i put red or other colour line to this robot???
Nice work 👍
Thanks for the visit
Do this with motor drive big one which fit on the to of theaurdino
what is your moter voltage
what happen is any object is interrupts in middle of the line , is it stop?
loved the video most detailed one I could find but the only thing I dint like was that he didn't speak in the video to explain it
Check the article link bro
Bro I have did what u say till last and the Bluetooth module also connected but no motors was working bro plz give me a solution bro plz plz
bro can you give me the link of the app that you used to control the robot by bluetooth🙁
Sir kya main 9v battery use kar sakta hoon
Hey brother, my car has little weight on it what should i do it’s not moving
Hey bro i make this type of robot for my college project but the problem is when i start the robot it will go straight very easy but when he try to turn it will stuck what can I do please help
how to charge the power supply?
We compalsery have to use only Arduino Uno R3
Tks u bro
Welcome
Bhai black line ki jagah white line draw ker sakte hai?
What is this gnd wire 3:04 please tell
Hi, could you upload the sketch for the program because I need it for my science exhibition
How can we make it faster?
Hi
Do you have any ideea why neither of my wheels are working at the forward movement but at the turns they work perfectly fine?
Thanks
Check your motor driver first
the code is not working properly
it is showing some error
Hi bro how to increase the speed of motor rotation? Please reply bro
the car is starting and the wheels are turning but it won't move on the track, can you help me how to solve it?
how to recharge the battery
Bro how do you make the car do a 360 degree turn
The link of the code doesn’t work please updated
bro can u upload flowchart for this i need this tomorrow
How heavy it is car
3:04 how i can make this wire ( female-female and female- male) together ?
5v is Vuot use for sensor why ad dont use Vin and GND 5v for adruino
Sir, I like your videos about Arduino projects. Sir, will the line follower robot sensors blink and produce the sound beep when completing the black line circle if I attach the 5v buzzer in the circuit diagram as well in the code for the line follower robot? Sir, will the line follower robot work or not?
The code needs to know the start and end points of the circle, otherwise it won't work
Mare ir sensor me 4 pins hai connection kayse karu samazme nahi aaraha hai please help me🙏😭
Are you from India
The obstacle avoiding robot should be made with arduino and there shouldn't be any beeping sound in it. I just request you to plz make a video on it .
Ok bro ☺️
Plz provide the code sir?? 🙏
Sir windows 7not downloading it
mi carro no reconoce la liea sigue derecho me puede atudar gracias saludos de de colombia
Hello help me pls ultrasonic sensor or servo motor se esko kese calaye and code pls pls pls pls
775 motor servo motor Arduino se kaise jode
Sir your videos should be long so we can understand better
when I'm testing only 3 tyres are moving and when I turn counter clockwise , no tyre moves and when I turn clockwise only 1 tyre very slowly moves. And When I keep one clockwise and one sensor anti clockwise then 3 tyres move and ny car moves in a circle I have changed sensor also .
Use two 9 v battery
पार्ट ऑनलाइन मागवल्या किती दिवसात घरी येतात
i don't see the coding
My robot still dont work . Can anyone help me ☹️
Bro i want this code bt link is expire..
the robot does not move forward on the line… when i lift it in the air the wheels start spinning… as soon as I put it down on the line it does not move forward
Bri, I am having the exact same problem.
Did you manage to find a solution for it. If so, please let me know. I need it urgently.
Guys calibrate the robot first....
Watch my video carefully...
I think it's doesn't work for me
Hello sir pls help me schematics not opening pls help ASAP!!
Hello And Thanks for sharing this tutorial.
One question- Is there a way to use IR module and IR remote instead of a switch. So it can be used to start the robot wirelessly and can be stopped whenever required from the IR remote. ?
Please guide on this
Working but only for straight path
Not taking turn wat 2 do
You have to adjust the sensor and the motor speed. I have used 150rpm motor for the video lin lower speed.
Which rpm motor you are using?
Tips:
1. Try using lowering the rpm in the code by changing the speed value to 0 to 255.
2. Try to adjust the sensors.
downloading motor shield name please send me
Bro will you please upgrade this to go through a line stop at the end for some minute then return back
Just have to modify the code add a delay and run the back() function easy
I had a doubt. When Im using those cheap 9V battery my motors aren't powering up. Have checked all the connections and code. When instead i used L293D motor driver my bot runs like butter with the same power supply. Can you tell me what could be the probable reason?
battery bro...
9V battery issue.
Previously I tried to make the car with the 9V battery but it doesn't provide enough power to the car to run.
so I stuck with Li-ion battery for high Power....
@@MakeDIY9 ok. But i switched to l293 driver only. L298 for some reasons was messing with my project. 😐
@@luckshaeey I will make a version of this car with l293d
@@MakeDIY9 bro is obstacles avoiding and line following are two different ir sensors? Because i made full car as per your connections but still doesn't moving Motors are not running can you tell me what would be problem (i have used 18650 li-ion battery)
Can you pass me the code because I can't see the code?
my car is not working
Sir , please make Line following + Bluetooth controlled robot using l298 Motor driver🙏🙏🙏 plz sir reply
ok bro
Can we connect battery directly with Arduino Uno using dc adaptor?
Yes you can but be careful about the voltage
Hii I tried the same everything is fine the connections code etc but after uploading the code the car just doesn't move. Can you tell what can be the reason for this?
Have you solved it?
Bro which is better l293d or l298n
If you ask me l298n is better because of high power count.
But however I will also make a robot tith l293d also 😉
Does it work to just use two wheels
Yes
This code errorr plss another code
How connect switch to battery holder
Just add the plus and minus wire to battery 's wires
Which software is used for coding in Arduino?
And how to transfer code into the Arduino ??
Please help me
Arduino IDE
Hi, I tried this and it runs okay. The only problem is when I tried to calibrate the sensor, the car wouldn't stop on the T path. Can you help me with this?
Hello
HOW DID YOU MAKE THAT GND WIRE FOR ARDUINO UNO AND IR SENSORS
This is just a 4 different wires connected in same spot and then I heat shrinked it.
You can check the Schematics for more information.
@@MakeDIY9 what is the meaning of heat shrinking
What is the total budget of it approximately??
800 to 900 without battery 🙂