How To Pass a Difficult Angle of 120 Degrees With a 10 cm And 12 cm Plinth.

Angles of 45/60/120 degrees are often found at home and in the workshop. That's why it's so important to know how to perfect such complex angles. In this video we show you how to get through a difficult 120 degree angle with a 10 cm and 12 cm plinth that looks difficult. If you are a craftsman and you have such problems in your home, you need to do this corner correctly. Don't forget to watch this video every time [Let's Create Perfect Angles].

[@welding-1]

The ideas are just great! Everyone was waiting for this video

[@inprogress.]

Thanks for your comment! I'm glad you liked this video!

[@maker-12]

This method was liked by all masters

[@OPINION-01]

just awesome, right?

[@KNOTWORK]

Many people liked this trick

[@knotropes]

I tried this on the plinth of my old house

[@alexismalafosse6784]

Fantastique, ingénieux !!! très bien montré.

[@chaosspandau8874]

Sehr saubere Arbeit. Ich bin absolut beeindruckt.

[@KNOTWORK]

This method has been very helpful for me! Thanks keep up the good work

[@inprogress.]

Thanks for your comment! I'm glad you liked this video!

[@knotropes]

Good luck to the team! Thank you for your support

[@knotropes]

Good luck to the team! Thank you for your support@@inprogress.

[@welding-1]

Did everyone like this video?

[@KNOTWORK]

I really liked it@@welding-1

[@jorgeluna4986]

Muy bueno el tutorial Gracias por tu tiempo

[@knotropes]

Thanks for the helpful tip! Although this problem is rare, this video was helpful

[@inprogress.]

Thanks for your comment! I'm glad you liked this video!

[@knotropes]

Good luck to the team! Thank you for your support@@inprogress.

[@welding-1]

Did everyone like this video?

[@KNOTWORK]

I really liked it@@welding-1

[@knotropes]

I really liked it@@welding-1

[@OPINION-01]

We look forward to more such Angular methods. Angles are very interesting for the audience

[@inprogress.]

Thanks for your comment! I'm glad you liked this video!

[@knotropes]

Good luck to the team! Thank you for your support

[@knotropes]

Good luck to the team! Thank you for your support@@inprogress.

[@welding-1]

Did everyone like this video?

[@KNOTWORK]

I really liked it@@welding-1

[@muoinon6518]

Wow, what's amazing idea! Thanks for sharing

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@ASTeer1699]

Great angular methods demonstrated very clearly. Useful on those rare occasions I guess.

[@user-xg1nv1xr3x]

it's amazing 👏 😍

[@OPINION-01]

just awesome, right?

[@KNOTWORK]

Many people liked this trick

[@knotropes]

I tried this on the plinth of my old house

[@huberthoffmann4679]

Super ausgerechnet und passend zugeschnitten.😅

[@andreyk5739]

Высшая математика, Браво!

[@thehobbit2422]

professional 👍👍👍

[@inprogress.]

Have a happy New Year!

[@thehobbit2422]

@@inprogress. Happy New Year

[@user-us5cw3eq8y]

Если вы любитель трудностей (судя по тому, что купили плинтусы разной ширины), то вот вам задачка: плинтусы одинаковой ширины, но с абсолютно разным профилем🤔😉...

[@user-wt8kf5ng3p]

Nice work and nice teaching

[@inprogress.]

Thank you! Your support means a lot to me

[@budisanyoto]

Metode pemotonga sudut mantap dan jelas

[@thepeoplesanto]

A thing of beauty

[@janostoth7406]

fantastik gooood

[@Lurava]

Супер!!! 👍👍👏👏👏🥰❤

[@user-fr7ep9mf1q]

БРАВО, ПРОСТО КЛАСС !
❤❤❤❤❤

[@inprogress.]

Thanks for your comment! I'm glad you liked this video!

[@knotropes]

Good luck to the team! Thank you for your support

[@knotropes]

Good luck to the team! Thank you for your support@@inprogress.

[@welding-1]

Did everyone like this video?

[@KNOTWORK]

I really liked it@@welding-1

[@BOSANAC520]

Super❤

[@davidwhite3025]

Master of masters.

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@inprogress.]

Where are you from my friend?

[@77Athmane]

Wonderful

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@inprogress.]

Where are you from my friend?

[@jamescameron7633]

Awesome

[@inprogress.]

Have a happy New Year!

[@bobvargas1024]

Genius!

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@ramonabelc.5173]

👍🏼👍🏼👍🏼👏🏽👏🏽

[@cieyk4158]

棒棒噠🎉

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@user-mr2mh7po5d]

Это высший пилотаж,ас своего дела

[@andyyeung13]

👍👍👍👍👍👍

[@user-us5cw3eq8y]

Поскольку в этих плинтусах, правом и левом, нашёлся отрезок одинакового профиля, за исключением пристенной части, то можно было эту часть 2 см просто отрезать по прямой

[@erasmoganceres4376]

So this is only useful if the 2 pieces you are fitting are of 2 different widths?

[@inprogress.]

Have a happy New Year!

[@erasmoganceres4376]

@@inprogress. Thank you, Happy New Years to you as well.

[@user-wl7wr3jk1n]

Супер 👍

[@user-zz6qr8iz4r]

Супер!

[@n.s.1254]

so you using 80, 100, 120, 140 plinth in a room ?

[@creative1000K]

ممتاز

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@maker-12]

I haven't seen such an angular method yet

[@inprogress.]

Thanks for the good ideas

[@OPINION-01]

just awesome, right?

[@KNOTWORK]

Many people liked this trick

[@knotropes]

I tried this on the plinth of my old house

[@user-jg8is6mk2t]

Ль (э
Эюд​@@inprogress.

[@ichernichenko]

Can you please explain as to why you would have the same baseboard but different sizes? Who in the world would do that?

[@inprogress.]

Have a happy New Year!

[@user-xb1pu9bn6i]

편안😌

[@user-ln2lp8ne4w]

😊🎉

[@inprogress.]

Thank you! Your support means a lot to me

[@mattgianino8734]

Awesome video...... But it seems like the guy has a hairy hand.... and he shaved a straight line on it?

[@SKYLIMI]

no, I have to buy a pink pencil now because I can't do it without it😃

[@ahayahsarmory5430]

I'd of been all thumbs

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@javierdominguezvicente3196]

El método no está mal......😮😮😮😮 Pero ése ángulo no tiene 120°, si no 135°.
De toda la vida un ángulo recto tiene 90°, y MEDIO RECTO 45, lo que nos da 135.😂😂😂😊😊

[@watchsintinsinsintin]

Magic Tick

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@elyaelya8394]

👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

[@DresdenFPV]

in hindsight it"s totally obvious - but I would have made that mistake at first too.

[@inprogress.]

Have a happy New Year!

[@DresdenFPV]

@@inprogress. thanks

[@user-mi3re1qg7v]

😅

[@budiawan7776]

ribet amat bro

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@heinrichkarter162]

Versuchts mal mit gleich großen leisten

[@NicusorAnechitei-zp7nk]

Profisionist 100%

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@patricklaughrey8727]

Thats a hack job

[@tirexi93bamberg3]

Таким геморроем я бы не занимался..... Конец после стольких мучений получился такой себе.в

[@inprogress.]

Have a happy New Year!

[@PSLSPB]

Сделано, конечно, правильно. НЕ понятно только какой идиот заложил в проект молдинги разной ширины??!! Идиот, наверное!!!!

[@AlkoDehond-xz3js]

Via heel veel wegen kom je ook in rome . 👎👎

[@ericmoser5568]

Only reason to do that is the boards don't have the same profiles, if they did that would only require dividing the angle.😮

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@Maksimus77177]

Я б подумал, что это невозможно

[@user-ru9jn5tt9u]

А что проблема купить одинаковые плинтуса ?