Machine to assemble and disassemble manual tires with homemade head here I ride snow tires on new wheels Your comments are welcome for more info do not hesitate Subscribe..
I didn't down vote it but several improvements can be made. Editing. This should have been a one minute video. He shows everything but the business end that pushes the tire over the rim. Music too action packed, come on, he's changing a tire. The HF tire changer is a POS. But it does hold the rim securely. Only real mods you need is to bolt it down on a concrete floor, grind the flat end of the red long bar to make it smoother and use the flat end to put that last tire section over the rim just like how you did it with tire spoons or long screwdrivers. Oh yeah,weld reinforcement on the bead breaker or it will bend.
Excellente idée, pour du pneu classique sa doit faire l'affaire ! 👍👍 Par contre sur des pneus taille basse sa doit pas être la même. Reste plus qu'à trouver la méthode pour les équilibrés sans aller au garage 😉 et la sa sera top
J'ai la même machine et il me faut ton amélioration aussi c'est le must ,je préfère travailler avec une machine nickel comme la tienne qu'avec une machine pneumatique a 1500e ,on est encore plus satisfait et réjoui de se monter ses pneu soi même lol
Du génie !!!Oui t'as raison ,surtout un pc avec you tube !Pas gonflé le gars il s'attribue les lauriers de la gloire ! " lui a déposé sa vidéo en 2016 " →ruclips.net/video/4MGmRZSiIIM/видео.html
The bead seater or 'duck foot ' needs more details. Also when you set the bead, get a clip on air chuck and stand clear of the rim. Sometimes they blow.
Dave M Yep, when I was mechanic, there was a kid working in a service station across town. Apparently the wheel he was mounting had a hairline crack in the bead area of the rim. He was leaning over it and when the bead seated, it came apart and decapitated him.
Bonjour Pascal, Comment faite vous l'équilibrage ensuite ? J'hésite sur l'achat des billes d'équilibrage, ou le petit support d'équilibrage avec le niveau et les plombs !!? Seb.
I don't know HOW you got that 55 series sidewall to flex that much and flip over the wheel ... I have a set of 55 series and could not get that sidewall to flex enough to flip over, i had to pay a shop $20 to mount my tires ..
I get to 9:40 and the tire won't budge anymore.. I'm 6'3" 250 lbs and cant pull or push enough to get that sidewall to flex and flip over the wheel ...
C’est pas mal aussi effectivement :) J’ai vu un youtubeur créer ça justement et expliquer comment fabriquer l’instrument :’)🤘 au top ta méthode ! ;) Si tu souhaite t’abonner à ma chaîne, tu est le bienvenue :) !
You should make a drawing of that and sell it on Ebay. I know I would buy it. I have the skills to make that, but maybe not to design it. Then all I need is to know where to get that knuckle casting from.
Bonjour, Avez vous une vidéo expliquant les modifications à apporter à la machine pour avoir le même système que vous? J'ai la même machine mais je n'ose pas monter des pneus sur des jantes alu, trop peur de les abîmer.
bonjour j'ai le mème appareil que vous mais je voudrais faire l'outil que vous avez fait. Pouvez vous me donner les cotes de l'outil fabriquer ? cordialement
The video says Homemade tire machine. The machine looks like a harber freight machine with a couple "Homemade" mods added. I like the drop arm concept with the nylon duck mount/demount head. I intend on making the same sort of mod to mine.
Bravo ! Ca c'est intelligent au limite... meilleur patent que j'ai vue cette annee.
That's great man, I love that modification! Makes the whole tool seem much more useful!
Great idea.
Anybody who gave a thumbs down is a hater. Great improvement!
Those are people who don't know or understand what work is. This video by Pascal is a great presentation of what a little thinking and effort can do.
I didn't down vote it but several improvements can be made. Editing. This should have been a one minute video. He shows everything but the business end that pushes the tire over the rim. Music too action packed, come on, he's changing a tire. The HF tire changer is a POS. But it does hold the rim securely. Only real mods you need is to bolt it down on a concrete floor, grind the flat end of the red long bar to make it smoother and use the flat end to put that last tire section over the rim just like how you did it with tire spoons or long screwdrivers. Oh yeah,weld reinforcement on the bead breaker or it will bend.
I agree......
Excellente idée, pour du pneu classique sa doit faire l'affaire ! 👍👍
Par contre sur des pneus taille basse sa doit pas être la même.
Reste plus qu'à trouver la méthode pour les équilibrés sans aller au garage 😉 et la sa sera top
Super les homes
You have made an awesome machine! Great job!
thank you very much
Awesome job
Nice contraption added to the Harbor Freight product
Sounds better without the noise !
Love the tool very nice tool.
ottimo lavoro
Impeccable
That's pretty slick. Great video brother.
Wow c'est vraiment cool
merci très pratique surtout
THANKS SO MUCH FOR YOU VIDEO, I am going to build one, according to your SPECS
trais bien fait bon travail
caça pesca merci beaucoup
Génial.
Merci n’hésitez à partager et à vous abonner si vous le souhaitez..
very nice!
merci..
Belle modification
merci je viens encore de l'utilisé aujourd'hui, un vrai plaisir
Good idea!
Merci ;)
Du génie
Merci beaucoup, n'hésitez pas à partager liker et vous abonner si cela n'ai pas déja fait ;)
J'ai la même machine et il me faut ton amélioration aussi c'est le must ,je préfère travailler avec une machine nickel comme la tienne qu'avec une machine pneumatique a 1500e ,on est encore plus satisfait et réjoui de se monter ses pneu soi même lol
si tu sais souder il n'y à rien de bien compliquer à fabriquer...
Du génie !!!Oui t'as raison ,surtout un pc avec you tube !Pas gonflé le gars il s'attribue les lauriers de la gloire ! " lui a déposé sa vidéo en 2016 " →ruclips.net/video/4MGmRZSiIIM/видео.html
I'm surprised the Chinese hasn't taken this idea and sold it to harbor freight already.
Awesome...
Ive just brought one of these and the bar to put the tyres on is useless... These need to mass produced.. They would sell well
I agree! Make 10 and you will see, everyone will buy one, then get 100 made. Patent it before the Chinese steal your design!
sorry, but the Chinese would ignore the patent and mass produce them anyway
Il serai top a faire celui ci
to make it easier to wear rubber, you need to plant it in the groove from below!
Very nice pascal!!!! Awesome modification
merci
It looks like the tire isn't being pushed down into the drop center so it would go on even easier.
Thanks looks good. Music not so much
The bead seater or 'duck foot ' needs more details.
Also when you set the bead, get a clip on air chuck and stand clear of the rim. Sometimes they blow.
Dave M Yep, when I was mechanic, there was a kid working in a service station across town. Apparently the wheel he was mounting had a hairline crack in the bead area of the rim. He was leaning over it and when the bead seated, it came apart and decapitated him.
salut belle video , ou as tu trouvé la tete pour ne pas abimé la jante et comment fais tu pour équilibrer la roue ?
Bravo bella modifica hai risolto il problema dei cerchi in lega
merci,oui tout est fait pour ne pas abimer les jantes en alu.
n'hésitez pas à partager et vous abonner si ce n'ai pas fait..;)
Bonjour Pascal,
Comment faite vous l'équilibrage ensuite ?
J'hésite sur l'achat des billes d'équilibrage, ou le petit support d'équilibrage avec le niveau et les plombs !!?
Seb.
Hi! I have The same tyre changer. Could i know the pipe diameters? Thank You!
I don't know HOW you got that 55 series sidewall to flex that much and flip over the wheel ... I have a set of 55 series and could not get that sidewall to flex enough to flip over, i had to pay a shop $20 to mount my tires ..
I get to 9:40 and the tire won't budge anymore.. I'm 6'3" 250 lbs and cant pull or push enough to get that sidewall to flex and flip over the wheel ...
C’est pas mal aussi effectivement :)
J’ai vu un youtubeur créer ça justement et expliquer comment fabriquer l’instrument :’)🤘 au top ta méthode ! ;)
Si tu souhaite t’abonner à ma chaîne, tu est le bienvenue :) !
merci, c'est fait ,si tu veux t'abonner également tu es le bienvenue . ;)
salut l'ami tu aurait le lient du type qui fabrique l'outils merci
Can you list the part you use for the slider on the rim where you bought it from? THX
www.manomano.fr/outil-du-mecanicien/outil-pour-le-montage-des-pneus-2683258?referer_id=543413
You should make a drawing of that and sell it on Ebay. I know I would buy it. I have the skills to make that, but maybe not to design it. Then all I need is to know where to get that knuckle casting from.
Super vidéo merci =) Mais comment s'appelle votre outil à 9:50 svp ?
oui mois aussi merci tintin bidouille
Nice job. I'm making one. But just need the front part that seats the bead. Where did you get. Pascal?
ici: www.ebay.fr/sch/carliftparts/m.html?ssPageName=&_trksid=p2057872.m2749.l2654
@@vwpascalou will it break over time because it's plastic. Or should I get a metal one? Thank u
Bonjour
Bravo .je peux avoir les d'émotions des tubes merci
Combien vous vendriez un mandrin fait maison comme celui-ci ? ( Je ne sais pas souder )
Soir super la vidéo Pouvez-vous me donner les cotes pour fabriquer le même ça m’intéresse bien merci
上の黒いパーツがハンドメイドと思われるが自分で加工出来ない人の為にこの部分だけ何方か日本で販売してほしいな。
You should make these and sell them .. !!
Ok i how do i get you to make me one of those atachments for my manual tire machine ? Im serious ? $$$
Cool now show us how to make 1
did you copy this from another video which was posted early 2017 same idea
Preciso comprar um desmontado
Bonjour,
Avez vous une vidéo expliquant les modifications à apporter à la machine pour avoir le même système que vous?
J'ai la même machine mais je n'ose pas monter des pneus sur des jantes alu, trop peur de les abîmer.
NayTeK bonjour il vous suffit simplement de fabriquer la pièce qui est au début de la vidéo.
most likes because of the music, i guess ;-)
ta key du soft nova
bonjour
j'ai le mème appareil que vous mais je voudrais faire l'outil que vous avez fait. Pouvez vous me donner les cotes de l'outil fabriquer ?
cordialement
Bonjour
Demande à tintinbidoulle c lui qui l'a inventé !!! Lui là juste copié .
What u use to make that
steel tube
Bout how much in cost for the materials
moins de 50€
Je crois savoir d’où t’es venu l’idée.
Lol
lol
il y a du joli plagiat ..
OK, maintenant est ce qu'on peut voir une demonstration a savoir comment tu enleve le pneu de sa jante avec ton gadget?
Dès que je j'aurais l'occasion dans faire une je le ferai, après y a rien de compliqué.
What is up with the music though too dramatic
Bos. Alat mantef
Another possibly good video screwed with way too damn loud racket
La musique complètement hors sujet. Belle copie d'idée
Homemade??? Looks like harber freight to me..
??
The video says Homemade tire machine. The machine looks like a harber freight machine with a couple "Homemade" mods added. I like the drop arm concept with the nylon duck mount/demount head. I intend on making the same sort of mod to mine.
That bloody awful music spoils the great video, why the hell does it have to be on?
Sell me your top pipe devise
That's not a home made head. You bought the head off ebay and made the attachment