Woodturned Bowl - Two-Toned Quarter-Sawn
HTML-код
- Опубликовано: 30 сен 2024
- Woodturned Bowl - Two-Toned Quarter-Sawn
It's not often you get an opportunity to turn a two-toned colored wood bowl on the lathe. Well, actually, if you have quarter sawn wood with a bit of heartwood, it's not as hard as you might think. Watch as my bowl gouge and I turn this two-toned quarter sawn wooden bowl from a section of hickory. Enjoy!
▶︎▶︎▶︎TURN A WOOD BOWL UNIVERSITY◀︎◀︎◀︎
✅ Bowl Gouge Mastery
www.TurnAWoodB...
✅ Tool Sharpening - For Wood Bowl Turning
www.TurnAWoodB...
✅ Tree To Bowl - Understanding Green Wood
www.TurnAWoodB...
✅ Bowl Turning - Start to Finish
www.TurnAWoodB...
▶︎ START TODAY! ◀︎ Online Turning Courses - turnawoodbowl....
_____________________________________________________________
FREE WOOD BOWL TURNING TIPS EMAILED EACH WEEK
Sign Up Free Now - turnawoodbowl....
_____________________________________________________________
MY MAIN BOWL TURNING EQUIPMENT
• Full Face Shield - amzn.to/392lvuL
• Respirator - amzn.to/3p25omw
• FIlters for Respirator - amzn.to/2Mc4ogZ
• Safety Glasses w/ Readers - amzn.to/3iyGxEI
• Impact Driver - amzn.to/36hshhm
• Faceplate - amzn.to/3tcq7sp
• 5/8" Bowl Gouge (roughing) - amzn.to/2WkixLl
• 1/2" Bowl Gouge (all-purpose, finishing) - amzn.to/38UqQmp
• Live Center (with bearings on tailstock) - amzn.to/3gZxn1K
• Tailstock Extension - amzn.to/30YGIjX
• 1-1/4" x 8 TPI - Four Jaw Dovetail Chuck (w/ screw option) - amzn.to/3m6jEJd
• Slow Speed Sharpening Station Grinder - amzn.to/39ervRL
• 80 Grit CBN Wheel - amzn.to/3fADKJo
• 180 Grit CBN Wheel - amzn.to/37c9zVi
• Oneway Wolverine Sharpening System - amzn.to/33ilNKX
• Beading Tools - amzn.to/3q8CWCd
• Large Calipers - turnawoodbowl....
• Spur Drive Center (MT2 Morse Taper) - amzn.to/3gtha4i
• Curved Tool Rest - amzn.to/3fBbNBj
• J-extended Tool Rest - amzn.to/3oqTkeZ
• Curved Tool Rest - amzn.to/3o4y5Ao
• Spindle Detail Gouge - amzn.to/33je2o0
• Sanding Angle Drill - amzn.to/3l9OcbS
• 3" Sanding Mandle - amzn.to/378DJbP
• 3" Sanding Disks - amzn.to/3q2A0VZ
• Tried and True Danish Finish - amzn.to/3w8lFN7
• Tried and True Original Finish (Beeswax and Linseed Oil) - amzn.to/3VC2w0G
• Wood Burning System - amzn.to/2Nk6Wd
____________________
Turn A Wood Bowl is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
Online Turning Courses --- turnawoodbowl....
Website --- turnawoodbowl....
My Publications --- turnawoodbowl....
T-SHIRTS - merch.turnawoo...
RUclips --- turnawoodbowl....
Instagram --- turnawoodbowl....
Etsy Shop --- www.etsy.com/s...
Pinterest --- turnawoodbowl....
Facebook --- turnawoodbowl....
_____________________________________________________________
▶︎▶︎▶︎TURN A WOOD BOWL UNIVERSITY◀︎◀︎◀︎
✅ Bowl Gouge Mastery
www.TurnAWoodB...
✅ Tool Sharpening - For Wood Bowl Turning
www.TurnAWoodB...
✅ Tree To Bowl - Understanding Green Wood
www.TurnAWoodB...
✅ Bowl Turning - Start to Finish
www.TurnAWoodB...
▶︎ START TODAY! ◀︎ Online Turning Courses - turnawoodbowl....
_____________________________________________________________
FREE WOOD BOWL TURNING TIPS EMAILED EACH WEEK
Sign Up Free Now - turnawoodbowl....
_____________________________________________________________
#woodturning #woodworking #turnawoodbowl #bowlturning
I'm a quartersawn oak lover.
Because of all the non-quartersawn planes in a turned bowl, I've not found it to be so satisfying though.
On another matter, Kent, have a 318 year old Pinion Pine log that I got off mountainside in Manitou Springs CO. It been dead (id guess) 50 years. It's from high altitude & low precipitation... so I needed magnification to count the rings. 318+50-2023=1655. Cool wood in so many ways, but the widest point at the base was probably 14" diameter! It's bone dry, but full of a natural pitch/oil that smells like my dad's old turpentine. Anyhow, would you be interested in a piece of it to do a video, I might be able to part with one piece. Chuckw
Chuck, OMG are you kidding??!!!! Yes, I'd love to turn a piece of that!!! Please email me at kw@turnawoodbowl.com Thank you!
Very nice. Thanks!
Love the smell of turning hickory. Beautiful bowl. Nice job. Thanks for sharing
Yes, great point! ;) Happy Turning!
Really nice bowl, Kent. You always make turning bowls look so easy. Thanks for the video - that wood grain does look fabulous.
We just had a 100+ year-old oak come down - looking forward to turning some of that wood - check your email 🙂
Thank you kindly! Wow, that's a special tree. Enjoy and Happy Turning!
Wish we had Hickory in our area. However, I've turned quarter sawn ash with similar results to Honey Locust. Great video, thanks.
Sounds great! Yes, you have great species. Enjoy and Happy Turning!
Beautiful as always. I have a request. I always guide our new club members to your channel, to learn the techniques. I use a 'Clock' as a reference to how to angle the flute in the direction of the cut. 12 o'clock with the flute completely open. Can you incorporate the clock, i.e. 9:30 on the outside and 2:30 on the inside to assist newbees in how to direct the cut angle, in your explanation of how you make the cuts. Would help a lot of new turners. 😊😎
I'll see what I can do, Pete! Happy Turning! Kent
Kent. You may not be the best turner in the world but you are certainly the best teacher. I watch many ‘ how to videos ‘ so can speak with some credibility. You cover all of the bases. You might benefit with on screen graphics. I don’t know how that is done. I see it in use by other youtubers. IE; Your recommended exterior profile projecting thru the foot. I understand it after hearing you describe it several times. It would be a lightbulb moment 💡with a simple graphic.
I'll see what I can do David. Happy Turning!
Beautiful!! I have several pieces of a large Ash tree that I am going to try this technique on!! Thanks!!
Wonderful! All the best to you and Happy Turning!
Amazing how you explain these things in a way that I as a German banker can understand and be fascinated in the same moment! Thank you from Markus from Munich
Markus, Thank you kindly…in Munich. ;) Happy Turning! Kent
It ended up with three distinct tones. Would that make it a tree tone bowl? BAHAHAhahaha haha ... ha... ahem.
LOL! ;)
Hi Kent,will this be an edible boiled linseed oil mixed with beeswax? It is only recently I discovered you get an edible ir shall I say,food safe linseed oil
Martin, while I would not want to eat it, yes, it's food safe. Watch this one
ruclips.net/video/yQazOEwCPEg/видео.html Happy Turning! Kent
The two tone wood is beautiful. Being quarter sawn makes the bowl even better looking.
Thank you, Jean! Happy Turning!
That wood turned really nice - must have been as much of a pleasure to work on as it was to watch. Look at that chetoyyyyyancy!
LOL. Thank you, Bucky. Chatoyance is a fun word. ;)
Thanks-- you do a fine job narrating the video to make it very educational
Thank you kindly! Happy Turning!
Great bowl Kent! Thanks for sharing! I had an issue lately with bowls not running true once I turned it around. Thanks for reminding me to true them up again after turning them around.
Glad to help! Happy Turning!
Thankyou! Always excellent instruction.
Thank you, Mark! Happy Turning!
Kent you're an awesome teacher. Thanks for sharing 😊
Thank you kindly, PJ! Happy Turning!
Great bowl Kent - Love the colors and grain.
Lowell
Thank you, Lowell! I'm glad you like! Happy Turning!
Hello nice video as always .I want to ask how quickly u turn a piece like that,?1000 rounds?
Also I ve tried for a bowl but it s a little difficult to remove material when I have to dig it .greetings from Greece .your videos are always helpful
Hello there in Greece! Yes, I'm always turning under 1,000 rpms. Here's much more info on lathe speed. ruclips.net/video/qkAwPg-fPN8/видео.html All the best to you and Happy Turning! Kent
@@TurnAWoodBowl Kent your videos are very helpful
Great instruction as always. A beautiful piece
Thank you! Cheers!
I like these up close shots you've started using. Nice. 👍
Awesome, thank you!
Beautiful bowl and great explanation.
Thank you, EM!
Gorgeous bowl and great lesson Kent.
Thank you, Jack!
Amazing Kent. Top!
Thank you, Pi! Happy Turning!
I subscribed a long time ago and I always like your video's I have found you to be the most informative, I watch other turners for other reasons but I think you are the most professional. 😁
Thank you kindly, Lewis! You're the best! Happy Turning!
Beech and Walnut quartersawn bowls look amazing. Keep up the good work
Chris, Ohhhh those do sound amazing! Happy Turning!
Really nice.
Thank you, Mark! Cheers!
I would actually say that this is a three tone bowl ... agree with you that it's beautiful bowl ... as usual another interesting and informative video ... thoroughly enjoyed it 👍
The colour and grain of the honey locust is stunning ... love it 😁
Thank you very much, Barry! Happy Turning!
I have a question about sharpening I have a 6inch variable speed grinder can I use this in sharpening my gouges on using the Wolverine sharpening system
I'd recommend going with an eight inch slow speed grinder. You'll have less issues. Happy Turning!
Very nice.
Thank you! Cheers!
KENT MAKES HAPPY BOWLS.
Thank you, Roger. I like that one! ;)
Thanks!
Welcome!
Love your work.. I turn the laguna 24/36 no issues thought it would be my forever lathe but now not so sure...how do you like your American beauty? In your opinion is it the best out there? I.e. vicmarc,oneway etc thanks for your input
What do you not like about your Laguna? I’m considering buying one.
@@robertnorthrup1914 oh no issues I believe that the 24/36 doesn't have the issues of the 18/36 because it is designed a bit different and heavier duty.i have not had any issues with it. but definitely get the 24/36. And for the price I don't think that anyone compares.. I love it and routinely turn large pieces 23 in in diameter and core. I was just looking at the robust lathe to be my forever lathe. Just wondering if you could justify the price. It looks like it's the best on the market.
@@robertnorthrup1914 I have the 18/36 with the 20" bed extension which gives me the ability to turn a 32" piece. The only thing I wish my Laguna had is a control that I can move to the left or right of my work. Other than that - it rocks!
@@tielkgatethat's what is nice about the 24/36 for 500$ extra the upgrades of the 24/36 are worth it.
Please don't get me wrong the 24/36 is definitely worth the money I love it.
Great job Kent, and very good explanation of the process.
Thank you, Ron! Happy Turning!
Very nice bowl