I love this way to ceate a voice ,I did not whave any clue about how to do it!!!!! Thank you so much... as always you are great and I love the way you teach, Kind regards desde Mexico City
BB Walker thank you very much for making this video. I have question Can i install vst sounds in my sx 700 with using expansion manager or i have to use the sampling route.
HLO 🙂 .. your videos helping me alot . First of all , I would like to thank you for these videos .. your doing really great ..i have stuck on one problem that I was doing multi sampling of a Tone , After following All the steps when i attach the pendrive and started installation It was showing (FAILED TO ACCESS DATA ) . I shall be really thankful to you if got the solution . i know it will be hard to reply all the comments 🙂 . but keep uploading videos forever ❤❤❤❤
Hi, I speak Ukrainian, so I'm writing through a translator. I want to create my own sounds for yamaha sx700, but my instrument already has a sound pack installed, I don't have a copy of these samples, so I don't lose it and all the settings, and at the same time add new sounds, what should I do? can you make a video on this topic?
Hi Walker i looked at your video how to create a custom voice very god explanation, but i have a question how can i loop a voice in the YEM, for example i have a string sample and it ends by the end of paling the key, so it doesn't hold the sound constantly if you have any idea can you make a video or tell as about if there is a way to do so thanks a lot.
Hello I have a problem creating the instrument, hope BB can help to solve it When I use 1 sample to create an instrument, after more than 1 or 2 octaves, the sample speed will become very fast, how to make this sample increase the octave, the sample speed will not change?
Hi I want to ask please I like to transfer E piano from kontakt to my yamaha sx900. Should I record all keys and upload to yamaha expansion program the all keys as well to make good quality sound like on kontakt ? Or should I record just the C key like you did on video thank you so much
Good question, Sampling All keys in few velocities (forte, piano, etc) mean a lot of work but you will have 100% copy. Using only C3 for whole range from C1 to C7 will give you poor quality (stretching pitch at wide ranges is bad) my advice - make a sample for each one or two octaves so sample C1, C2, C3 C4, C5, C6 or C1 C3 C5 C7
No, you can not because simple voice file do not contain WAV data. This is why you need pack. There is exception of this rule, if your voice in pure synth or it is based on factory WAV data you can simple move it between devices like I show in this video: ruclips.net/video/wUKUxKPfvAY/видео.html
Hello Sir! I am not able to save some packs in YEM as it displays that the memory is write protected or does not have enough free space. Please help me Sir, it's really important for me.
Can you save a ordinary file on this memory stick? try using File explored , also check the file system of pendrive it should be FAT32 if I remember well. My PC / drive / left mouse click properties
@@BBWalkerTV I have a very humble request for you Sir. I can provide you with the expansion packs I wanna put into instrument and the instument info, can you please convert them for instrument and share it with me through google drive? It will only take your 5 minutes but save me a lot of months and unnecessary work to create patches. Hoping for a positive reply.
Is it possible if I record my guitar strumming and then I want to add it to a style in the Yamaha keyboard will it work with the Accompaniment? the strumming pattern that I recorded?
That is a very good question.I assume you want to have "automated chord strumming" while playing on accompaniment part (left hand) and your strumming should "match" the style tempo (I mean it should follow the Tempo changes) , there are a few methods of achieving it. One of them is to use solo guitar voice (your own voice recorded like in this video) and add Harmony effect called Strumming,. I am showing it in this video: ruclips.net/video/OBjFZhgLEfs/видео.html If you need something other - just let me know I will create a video about it case is seems to be good , challenging topic. Another way but without tempo follow it to use Audio Media Pads - but they will hold only prerecorded sample without tone change. Please describe your project more. Regards
@@BBWalkerTV it’s a very good video,but when I go into the style creator and want to select this harmony effect to make the voice strum it’s doesn’t let me do it 🤷♂️ what I tried to do is I recorded my sled strumming my guitar in the chord Cm and then I converted it into wav created a voice in YEM added to my keyboard and when I created a style I added that voice of me strumming on the guitar but it didn’t work with the accompaniment. Is it because it needs to be like a AUDIO STYLE?
BB. Your knowledge of this keyboard astonishing ! Thankyou.
Thank you Kevin. Regards, have a nice weekend.
Completely agree,few people like BB Walker openly teaching what he knows to others
I love this way to ceate a voice ,I did not whave any clue about how to do it!!!!! Thank you so much... as always you are great and I love the way you teach, Kind regards desde Mexico City
Great explanation. They're some people out there needed slower tension like you did. This is the video I have been waiting for. Thanks again.
Thank you so much for your tutorial. Your explanation is very fantastic. Thanks again
That you so much! I have been looking for this for the past 3 years!
I am glad I can help. I will be greatful for sharing this video in your socials. Thanks
BB Walker thank you very much for making this video. I have question Can i install vst sounds in my sx 700 with using expansion manager or i have to use the sampling route.
Bravo! Hai fatto una bella lezione sul Sample per Yamaha!
I love it.. ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Good morning. I would like to know how to load a new piano voice in Yamaha DGX 640 or use it directly from a USB stick. THANKS
Very Good Lesson we need more lesson THANKq sir🌹🌹🌹
You are welcome Sinhala.
I give you 💯 for the video. Thanks again B B
HLO 🙂 ..
your videos helping me alot . First of all , I would like to thank you for these videos .. your doing really great ..i have stuck on one problem that
I was doing multi sampling of a Tone , After following All the steps when i attach the pendrive and started installation It was showing (FAILED TO ACCESS DATA ) .
I shall be really thankful to you if got the solution .
i know it will be hard to reply all the comments 🙂 .
but keep uploading videos forever ❤❤❤❤
dobry den , moc vas prosim da se convertovat cely pack ppi na ppf nebo yem?
Wonderful
U are welcome. Regards
Hi BB Walker, are you able to transfer Roland keyboard sound samples to Yamaha using FL studio or Audacity?
Very useful.Thank you.
U are welcome. Regards William
Hi, I speak Ukrainian, so I'm writing through a translator. I want to create my own sounds for yamaha sx700, but my instrument already has a sound pack installed, I don't have a copy of these samples, so I don't lose it and all the settings, and at the same time add new sounds, what should I do? can you make a video on this topic?
Great thanks
Thanks for the comment. Regards. I will be greatful for sharing this video in your socials.
Another great content. Are you planing to make a video about this Focusrite interface? Thanks
Thank you Victoria.
Thanks the English version
how do you make the registration memory lights like that?
UR DA BEST!
This is the whole playlist about managing reg memory: ruclips.net/p/PLlMRSGuMikFro0jJMEuN98q5SykJTJdZH
Hi Walker i looked at your video how to create a custom voice very god explanation, but i have a question how can i loop a voice in the YEM, for example i have a string sample and it ends by the end of paling the key, so it doesn't hold the sound constantly if you have any idea can you make a video or tell as about if there is a way to do so thanks a lot.
This is the video you asked for: ruclips.net/video/CK1zi4a_HN0/видео.html
Very well done. BB I enjoyed it. Oh and another possible thring to try too is creating a megavoice. using the 8 elements.
Hello
I have a problem creating the instrument, hope BB can help to solve it
When I use 1 sample to create an instrument, after more than 1 or 2 octaves, the sample speed will become very fast, how to make this sample increase the octave, the sample speed will not change?
Hi I want to ask please I like to transfer E piano from kontakt to my yamaha sx900.
Should I record all keys and upload to yamaha expansion program the all keys as well to make good quality sound like on kontakt ? Or should I record just the C key like you did on video thank you so much
Good question, Sampling All keys in few velocities (forte, piano, etc) mean a lot of work but you will have 100% copy. Using only C3 for whole range from C1 to C7 will give you poor quality (stretching pitch at wide ranges is bad) my advice - make a sample for each one or two octaves so sample C1, C2, C3 C4, C5, C6 or C1 C3 C5 C7
@@BBWalkerTV Hi,
alright, thank you so much for your help I will try it today
does this support the PSR-EW425?
Hi great video but how to create a pad that holds the sound as long as you hold the key down ?
Good question. you are asking about looping sample. I will try to find answer and let you know because I have never do it before.
This is the video you asked for: ruclips.net/video/CK1zi4a_HN0/видео.html
Enjoy
Sir, can we make individual voice files other than making and installing packs...
No, you can not because simple voice file do not contain WAV data. This is why you need pack.
There is exception of this rule, if your voice in pure synth or it is based on factory WAV data you can simple move it between devices like I show in this video:
ruclips.net/video/wUKUxKPfvAY/видео.html
Is it possible to have more user memory by deleting some of the factory styles that r not in use??
Unfortunately no. This factory space is Read-only and it is separated from the writable User-Space.
Hello Sir! I am not able to save some packs in YEM as it displays that the memory is write protected or does not have enough free space. Please help me Sir, it's really important for me.
Can you save a ordinary file on this memory stick? try using File explored , also check the file system of pendrive it should be FAT32 if I remember well.
My PC / drive / left mouse click properties
@@BBWalkerTV Yes, an ordinary file is being saved well, the format also sticks to the FAT32. Still the problem remains
@@shreyanshjain3063 That is really awkward. The last idea is to format memory using instrument. There was an option in Functions / System somewhere
@@BBWalkerTV I have a very humble request for you Sir. I can provide you with the expansion packs I wanna put into instrument and the instument info, can you please convert them for instrument and share it with me through google drive? It will only take your 5 minutes but save me a lot of months and unnecessary work to create patches. Hoping for a positive reply.
@@shreyanshjain3063 Sure but now I have only PSR S670. Please contact me bbwalker@holikstudios.com
Super
Thanks Ruwan. I will be greatful for sharing my videos in your socials.
Is it possible if I record my guitar strumming and then I want to add it to a style in the Yamaha keyboard will it work with the Accompaniment? the strumming pattern that I recorded?
That is a very good question.I assume you want to have "automated chord strumming" while playing on accompaniment part (left hand) and your strumming should "match" the style tempo (I mean it should follow the Tempo changes) , there are a few methods of achieving it. One of them is to use solo guitar voice (your own voice recorded like in this video) and add Harmony effect called Strumming,. I am showing it in this video:
ruclips.net/video/OBjFZhgLEfs/видео.html
If you need something other - just let me know I will create a video about it case is seems to be good , challenging topic.
Another way but without tempo follow it to use Audio Media Pads - but they will hold only prerecorded sample without tone change. Please describe your project more.
Regards
@@BBWalkerTV it’s a very good video,but when I go into the style creator and want to select this harmony effect to make the voice strum it’s doesn’t let me do it 🤷♂️ what I tried to do is I recorded my sled strumming my guitar in the chord Cm and then I converted it into wav created a voice in YEM added to my keyboard and when I created a style I added that voice of me strumming on the guitar but it didn’t work with the accompaniment. Is it because it needs to be like a AUDIO STYLE?
@@BBWalkerTV can you make some video on this topic please it would be great and very helpful😊
OK, I will create a video about it. I like this topic. Basically your style need to be created with the usage of your custom voice.
how to make SA samples
it doesn't recognize my psr-e473
Sir, i appreciate you for choosing yamaha psr s975 instead of sx 900.
I am also owning s975, its far away better than the sx series
got S too but 670
@@TFB2022 oh. Awesome brother
Does it work on any keyboard?
With any that support Yamaha Extension Manager, Yes
@@BBWalkerTV good to know
Thanks for the work, So I have .STY xxxx.sty so how do we install into a SX900 by using a expansion manger. It is a style sample format
Hey. You don't expansion manager. Just copy file using memory stick just like shown in here:
ruclips.net/video/wUKUxKPfvAY/видео.html
Thanks