I need a masterclass on how to get my garage best for glassing in the winter. Any recommendations on heaters and ventilation? In NJ as well and often buy supplies from you guys
The only time you really need heat is during the glassing process. It is very important to have the blank at a similar temperature as the resin to avoid "thermal shock" when warm resin hits a cold blank. Therefore a little oil radiator directly under the board will go a long way in heating it and the surrounding area. You can even rig a blanket to make a tent over your board while heating and remove before glassing... keep your resins inside at room temp. You can always heat the resin slightly as well to reduce viscosity so it flows. I've built plenty of board during the winter in a 35 degree warehouse and these tricks helped considerably. But there's no substitute for a properly insulated climate controlled room... 🤙🏽
I need a masterclass on how to get my garage best for glassing in the winter. Any recommendations on heaters and ventilation? In NJ as well and often buy supplies from you guys
The only time you really need heat is during the glassing process. It is very important to have the blank at a similar temperature as the resin to avoid "thermal shock" when warm resin hits a cold blank. Therefore a little oil radiator directly under the board will go a long way in heating it and the surrounding area. You can even rig a blanket to make a tent over your board while heating and remove before glassing... keep your resins inside at room temp. You can always heat the resin slightly as well to reduce viscosity so it flows. I've built plenty of board during the winter in a 35 degree warehouse and these tricks helped considerably. But there's no substitute for a properly insulated climate controlled room... 🤙🏽