good tutorial. can you make a tutorial to create a user defined material such as R-134a vapor and liquid as a fluid?, that implemented in a heat axchanger like double pipe.
@@AnsysTutor I mean you should simulate a structure(a bridge, a building, etc) on a semi-infinite continuous space(a block of soil) to observe in what way soil's deformations can influence the bridge's behavior and therefore, its internal stresses. Greetings dude.
thanks for the tutorial of yours first of all. Secondly, I have master degree thesis and wanna clear up it to you. Could you help me out for doing it in Anysis ? Wait for your support. Thanks a lot.
@@AnsysTutor Thank you so much for your help from now on. I have been looking at tutorials on youtube and any other websites to the analysis of my thesis, but unfortunately there is no similar example regarding to that. I have sent an e-mail now to you. Check it out and wait for your answer. Thanks a lot.
Thanks for the tutorial. I am a beginner about to learn CFD and have several questions. What is the difference between Spaceclaim geometry and design modeller geometry? Why do you prefer using design modeller geometry? Do you have any suggestions on what book or reference to read to learn CFD? My background is chemical engineering.
Both spaceclaim & ANSYS Design modeler are used to create geometry. Spaceclaim is a new tool with more advanced options, it has more features than ANSYS design modeller. I Prefer to use ANSYS Design modeller because I feel its easy for me to create some simple geometries using it. Also, we have tutorials made using ANSYS Spaceclaim. It depends upon you on which case to use which one. You can prefer CFD Book by Malalasekera , its a good book.
Add frozen will keep the part separate, which is to be used for pattern. add material will unite the part with the previous part. So making it as add material will not be helpful.
3:40 from this configuration, how did you manage to have the 3:41 configuration ?? because it changes everthing, and it goes wrong if I continue with the 3:40 and before configuration
@@ephemeritescience5306 If it doesn't work clicking on the new plane to change xyz location, you can just click YZ plane in Modelling box. I've tried it and it works.
Are you from Iran? Some users from Iran had also same problem, this is from telegram side , we dont have anything to do with this. If you have any questions you can mail us or send us in Facebook or telegram
Thanks you very much
You are welcome
good tutorial.
can you make a tutorial to create a user defined material such as R-134a vapor and liquid as a fluid?, that implemented in a heat axchanger like double pipe.
You can insert the new material property in fluent. See our tutorials we have shown steps regarding this matter.
Can you make tutorial for simulation about ansys for plume from vulcano mountain??
It might be done using a multiphase modeling approach with DPM. It need a lots of time.
Ansys-Tutor yeah it will be need more time. Thank you for respon.
Can make tutorials about porous media or moving wall
will try to make a tutorial if possible.
I love your channel. Could you make a video on soil-structure interaction?
Please describe a little more about the project.
@@AnsysTutor I mean you should simulate a structure(a bridge, a building, etc) on a semi-infinite continuous space(a block of soil) to observe in what way soil's deformations can influence the bridge's behavior and therefore, its internal stresses. Greetings dude.
thanks for the tutorial of yours first of all. Secondly, I have master degree thesis and wanna clear up it to you. Could you help me out for doing it in Anysis ? Wait for your support. Thanks a lot.
Yes, please share the details of the analysis. If possible will try to help you. ansystutor7@gmail.com
@@AnsysTutor Thank you so much for your help from now on. I have been looking at tutorials on youtube and any other websites to the analysis of my thesis, but unfortunately there is no similar example regarding to that. I have sent an e-mail now to you. Check it out and wait for your answer. Thanks a lot.
@@AnsysTutor hello. Could you help me for the part I have sent your e-mail? Wait for your answer still. Thanks a lot again.
I like these tutorials but I want these tutorials by using 2020 R2 interface. Pls do that sir
Follow the same procedure, there is not much difference.
Thanks for the tutorial. I am a beginner about to learn CFD and have several questions.
What is the difference between Spaceclaim geometry and design modeller geometry? Why do you prefer using design modeller geometry?
Do you have any suggestions on what book or reference to read to learn CFD? My background is chemical engineering.
Both spaceclaim & ANSYS Design modeler are used to create geometry. Spaceclaim is a new tool with more advanced options, it has more features than ANSYS design modeller. I Prefer to use ANSYS Design modeller because I feel its easy for me to create some simple geometries using it. Also, we have tutorials made using ANSYS Spaceclaim. It depends upon you on which case to use which one. You can prefer CFD Book by Malalasekera , its a good book.
can you make any video on soil structure interaction???
Can you please elaborate a little more about the simulation.
@@AnsysTutor its like the effects on structure due to soil and vice versa,,,,
Why did you prefer to choose add frozen at 11:09 and what is the difference between frozen and material?
Add frozen will keep the part separate, which is to be used for pattern. add material will unite the part with the previous part. So making it as add material will not be helpful.
Ansys-Tutor ı see . Thank you. Which one is better to unite boolean or add material ?
Both works for the same purpose. Only time matters.
I create transmission tower by lines after that I given beam L cross section. Now how to make single body to create enclosure for tower?
1 D body tower body cant be made boolean with the 3d outer enclosure.
U are saying line body is 1D body?
But I given L cross section then it is not 1D body
That cross-section is only can be treated as an assumption. But actually its a 1d body.
@@AnsysTutor Then what should I do know. How to covert that line body to solid body
You need to create that in 3D, if you want enclosure arround it.
hii sir ,when I do meshing some option are not show on my screen (Ansys 15 )
any help ?
Try with the default meshing.
What is the next step after tutorials for beginners?
You can use system coupling to combine it with static structural to observe the structural variations.
3:40 from this configuration, how did you manage to have the 3:41 configuration ?? because it changes everthing, and it goes wrong if I continue with the 3:40 and before configuration
I mean before 3:40, the central point of XYZ is at the top of the body, and in 3:41 the central point of XYZ is in the right bottom of the body
Its due to the plane selection, if you click on the new plane the xyz origin will shift to the plane location.
@@ephemeritescience5306 If it doesn't work clicking on the new plane to change xyz location, you can just click YZ plane in Modelling box. I've tried it and it works.
Excellent video, but when I update the mesh, it gives me an error and it closes ansys, would you know why? Can you provide me with the file?
mi correo es ferciva@gmail.com
Check the error message that appear. It might be a license issue.
Hi.i just join your telegram group but it says i cant send any massage and you have banned my region 😔
Are you from Iran? Some users from Iran had also same problem, this is from telegram side , we dont have anything to do with this. If you have any questions you can mail us or send us in Facebook or telegram
@@AnsysTutor yeah im from iran.ok✌