@itsjussjerry Bodevision has gotten lots and lots of subs, views, and likes from BB fans. That alone was worth the work. Anything extra... being actually paid for it, being mentioned in videos, etc is just a bonus.
I came from bb cannel but they definitely could do better at shouting out bode at this point I'm assuming they are paying for the paint jobs but even at that they he does amazing work and definitely deserves the shout out. @@itsjussjerry
If he can do this in a single car garage... imagine what he could do with a proper paint booth and shop with all the fancy tools. I'll be here supporting until that day comes and beyond.
@@BodeVision Your work is clearly, certainly among the top notch level especially with Your good, positive attitude, views, perspectives, perceptions, efforts, desires, inspection, evaluation, determination, achievement. Thus it is clear how You are so well connected with the BoostedBoiz, Kyle Wade, Wyatt Stengel and others too. Have You considered having a connection with "Mr. Sam" with his car care products or his supplier ? Perhaps also with Cleetus McFarland, Garrett Mitchell and team too ? All The Best, Sincerely P.S. Your 1988 Honda Accord, LS swapped looks very good to excellent and certainly looks and sounds very sporty too. Certainly Remember those model Accords very well along with all of the previous model years. My Best friend had a 1979 model Accord, bought used, when we met in May 1982 [in La, he drove from DC-MD suburbs Sept 1981]. This version, model Accord has some similarities within the body shapes [front, nose, quarter panels, sides, rear] with all of these modifications appears very similar with the Toyota Celica from the early 1980's including the 1982 Celica Supra, though a little shorter, narrower [especially the with wider wheel well, fenders, rear hatch window louvres] the LS Swap is certainly a much greater power level, increase compared with Honda 4 cylinder engines of that period and still. However Honda had already began producing V-6 options prior to 1988 for their Accord, as with Toyota for their Camry, Mazda for their 626, Nissan, Mitsubuishi, along with their V-8 engines for Acura, Lexus, Infinity, etc. perhaps those other options are more costly, expensive or less available than a GM LS V8.
Hey bode what do you use to make sure you have great Adhesion to a plastic front bumper so the paint doesn't peel or flake off and can bend with the bumper after paint and clear
Norton and 3m both make a very nice scuffing paste specifically for prepping raw plastic like this. It grits up nice with a little spray bottle of water, and a grey scotchbrite. Makes raw plastic prep really nice. Especially if the spray bottle is 50/50 water and isopropyl. Can use it with the scuff paste to clean and scuff, and can use it without the scuff paste after for a final clean.
😮 your giving Betty white away nah man lol so much memories on this bulit and stil my favorite hand bulit project Adam the civic lookin fantastic #bodesqaud #projectredhatch
One must also keep in mind that one of the ingredients of ABS plastic regardless of where it was manufactured is oil. That's why eventually your lip and bumper covers start shedding there paint
learned about release agent today! I love knowing those kind of things... not just that theres a problem and why but where it came from and how to treat it. Doctor Bode?😅
Im wondering if wrapping the flairs on your accord(to match the body mouldings) would help the body lines flow better. Enjoying your channel. Keep up the good work 👍.
People might hate, but going with the rattle can on the k member and other spots like it is really smart. I mean what are most people gonna want to touch that stuff up with? Gotta cut and grind? Rattle can it again and bam! You have a good enough match for a streetcar or a racecar. 👍
I would love to get the accord. I'm right up the road from Gainesville. Would make an awesome date night car! The wife would definitely be pissed at me for picking up lot lizards 😄 🤣
After I got my EG Hatch, I took the front bumper off to swap out the headlights for a set of one piece headlights (which I ended up not liking), found a black widow hiding behind the bumper right next to where my fingers were. I named the car The Black Widow after that (the Hatch is red, which does make it kinda funny)
Have bootedboiz shot out the accord for ya bro
Doesn’t seem like they give bode vision enough love on their channel
@@itsjussjerryI agree
I winning it don’t worry about it 😂
@itsjussjerry Bodevision has gotten lots and lots of subs, views, and likes from BB fans. That alone was worth the work. Anything extra... being actually paid for it, being mentioned in videos, etc is just a bonus.
I came from bb cannel but they definitely could do better at shouting out bode at this point I'm assuming they are paying for the paint jobs but even at that they he does amazing work and definitely deserves the shout out. @@itsjussjerry
You have upped your game over and over again! keep it up the top is just not enough!
Wow, thanks!
If he can do this in a single car garage... imagine what he could do with a proper paint booth and shop with all the fancy tools. I'll be here supporting until that day comes and beyond.
@@BodeVision Your work is clearly, certainly among the top notch level especially with Your good, positive attitude, views, perspectives, perceptions, efforts, desires, inspection, evaluation, determination, achievement. Thus it is clear how You are so well connected with the BoostedBoiz, Kyle Wade, Wyatt Stengel and others too.
Have You considered having a connection with "Mr. Sam" with his car care products or his supplier ? Perhaps also with Cleetus McFarland, Garrett Mitchell and team too ?
All The Best, Sincerely
P.S. Your 1988 Honda Accord, LS swapped looks very good to excellent and certainly looks and sounds very sporty too. Certainly Remember those model Accords very well along with all of the previous model years. My Best friend had a 1979 model Accord, bought used, when we met in May 1982 [in La, he drove from DC-MD suburbs Sept 1981].
This version, model Accord has some similarities within the body shapes [front, nose, quarter panels, sides, rear] with all of these modifications appears very similar with the Toyota Celica from the early 1980's including the 1982 Celica Supra, though a little shorter, narrower [especially the with wider wheel well, fenders, rear hatch window louvres]
the LS Swap is certainly a much greater power level, increase compared with Honda 4 cylinder engines of that period and still. However Honda had already began producing V-6 options prior to 1988 for their Accord, as with Toyota for their Camry, Mazda for their 626, Nissan, Mitsubuishi, along with their V-8 engines for Acura, Lexus, Infinity, etc.
perhaps those other options are more costly, expensive or less available than a GM LS V8.
The bay and it's extremities look absolutely stunning. Loved the little bath you gave her. You did a great job.
the shop truck sounds amazing. honestly a great build
Good result! I like that green truck, I'd be driving that thing all over the country looking for a bolt.
Man, I was never a fan of those generation Accords until you showed us how badass it can be. Now I want one lol
Hey bode what do you use to make sure you have great Adhesion to a plastic front bumper so the paint doesn't peel or flake off and can bend with the bumper after paint and clear
Commented on the last upload of this, grateful to have the chance at an opportunity at that accord man. Thank you! ❤️❤️
Been watching you the last 3 years and your qork and deication speaks volumes! Id love to be able to have you paint my NSX once its ready
I t came out great! I love it when the fist coat of Clear is applied - it makes all that sanding and grinding worth it.
Oh, Man! I watched this over my Honda's sound system...that LS Accord sounds soooo damnnnn goooood!!
Another sick paint job!
Keep it up!!
Man, you did such a killer job! The hatch is almost too nice now 👍
Like always another banger! Your filming and editing is almost as good as your paint/body work and that’s really saying something!
Thank you so much 😀
Norton and 3m both make a very nice scuffing paste specifically for prepping raw plastic like this. It grits up nice with a little spray bottle of water, and a grey scotchbrite. Makes raw plastic prep really nice. Especially if the spray bottle is 50/50 water and isopropyl. Can use it with the scuff paste to clean and scuff, and can use it without the scuff paste after for a final clean.
that truck looks B - U - ti - FUL !!! Loving the looks. Great work on the Civic. 🤙
Great work!
Great video as always!
Excellent result Adam, as always! Thanks for sharing and good luck to the potential winner. Cheers Nico.
Looks Awesome! Cant wait to see Kyle back to rippin the hatch
Came out great 👍
😮 your giving Betty white away nah man lol so much memories on this bulit and stil my favorite hand bulit project Adam the civic lookin fantastic #bodesqaud #projectredhatch
Thanks man!
Great work as always. I'm always a bit nostalgic about my days in college living in FL but that black widow reminded me of why I left LOL.
The Civic looks amazing with it's shaved and painted engine bay Adam, a very professional job as always👌🙏👍John UK
Dude your work is impeccable That engine bay looks amazing
I’m so impressed with your skills, fantastic job
One must also keep in mind that one of the ingredients of ABS plastic regardless of where it was manufactured is oil. That's why eventually your lip and bumper covers start shedding there paint
With proper application it should never shed paint
Brooo that’s GMC is CLEAN AF 🤝🏼👏🏼👏🏼👏🏼
Itz nothing short of awesome ness. That sweet paint job running down the track should get him the 8s he's looking for .So slick to be quick lol.
Hate to see the Accord go but I get it. The interior on the truck is sick btw.
looking gooooodd
Again , perfect job 💪🏻💪🏻
Glas paint Adam! Good job!
Good job boss!!! 💯💪🏾
Great work and content dude.
Bode Turning mud to gold.
I would love that accord, damn.
Boosted boiz have a wall of nuts and bolts lol tell them to replace some
Loved how the shop truck came out
Nice job BV
Dude no way the accord is what brought me to your channel to begin with!!! 🤯
Betty's mine!! Was made custom for me! Yall can come see her in california after shes delivered....
I want your shop truck!! I love it.
Great job man
88 accord was my first car. I've been dying to get another and I love me an LS swap. Would be a dream to win that!
Looks so good!!
Looks sick. Killer job again. Came to this channel when the wagon got done. Been here since.
I have found the SEM release agent cleaner works really good that followed up with the SEM scuff it
Killin it Bro! 👊🏻 LS swaped Honda is cleeeen 👀. Purchased and entered 🤘🏻
I need that accord in my life bad
learned about release agent today! I love knowing those kind of things... not just that theres a problem and why but where it came from and how to treat it. Doctor Bode?😅
This car didn't look this awesome when it was coming out of the factory!❤❤❤❤❤. Great job brother.
Im wondering if wrapping the flairs on your accord(to match the body mouldings) would help the body lines flow better. Enjoying your channel. Keep up the good work 👍.
I bet you could pick up a good olde florida lot lizard in that beast of a v8🤙
Wish i kept mine!!
Looks great as always
People might hate, but going with the rattle can on the k member and other spots like it is really smart. I mean what are most people gonna want to touch that stuff up with? Gotta cut and grind? Rattle can it again and bam!
You have a good enough match for a streetcar or a racecar. 👍
Brother get the wires winch controller at harbor freight 👌. Kyle’s car looking great ! Can’t wait to win your v8 Honda 🙏🏽
awesome work
Thanks a lot!
"Woohoo can't find it, grind it son!"🤣
Cracked up me up lol. Amazing work!
awesome work bro as always
Bro 🔥 😮
Sick as F🔥🔥🔥🤜love the work you do on all the rides you do. 👍
:O Your accord is a give away. Whaaaat? Omg im going to enter! Need to tell my Uncle. lol
Let's go 💪🏾 🔥
Man I saw the accord on marketplace..ive seen damn near every video on that thing ..looks awesome bro 💪
Killed it 😮💨💪
I believe the OEM CTR lip and OEM Si lip are identical, the reps are definitely different
Noooo that accord build is too sick to give away lol. Gonna miss it.
That Accord makes me wanna TUNA SUB!!!
😊Good Job
As usual you killed it again!!
I need that honda.
Looking good
Bode good job there hardly no over spray 😊
Final form confirmed
The Black Widow Hatch
Love it
Just entered!! 🙏
I would love to get the accord. I'm right up the road from Gainesville. Would make an awesome date night car! The wife would definitely be pissed at me for picking up lot lizards 😄 🤣
Not the lot lizards 😂😂😂
Nice
Ever thought of using thrust washers on fresh engine bay paint so the bolts don't dig in?
Shadow clone jutsu 🥷🏻 9:14
10/10 ❤
Kyle should really put a full interior back in this car, no decals, etc. Would be so clean.
Nice paint job. But a video just to paint a lip is wild tho ngl 😂
Did the wheel well overspray get on that unmasked part below the headlight buckets?
🔥🔥🔥
What rocker guard product did you use on the wheel wells?? Looks awesome
You should get ahold of Cooper Bogetti. He just wrecked his camero at the track.
That’s legit 👏
Plastic mold release is silicone based, plastic also "skins" against the mold.
Skins?
cool
those are all special honda bolts bro!
Awesome Stuff!....Hopefully Kyle takes care of it now Haha..
What brand rock gaurd did you use if you dont mind me asking .
videos are great, work is super clean and looks awesome, get a mic so we can hear you better!!
What brand spray can rock guard did you use?
After I got my EG Hatch, I took the front bumper off to swap out the headlights for a set of one piece headlights (which I ended up not liking), found a black widow hiding behind the bumper right next to where my fingers were. I named the car The Black Widow after that (the Hatch is red, which does make it kinda funny)
He needs to tint windows make them decals and paint really pop
Im a little confused can you win the accord with sending in a postcard? Or do you have to buy a key tag