Bought mine more then ten years ago and still going strong! Great and postitive shifts. Steeda make great parts! 2001 mustang gt, 4.9L mid compression stroker motor, match ported heads, xe270ah cams, bolt ons, 3.73 gears, bbk shorties, bbk x pipe, flowmaster catback. 308hp/328tq.
i know im randomly asking but does any of you know of a tool to get back into an Instagram account..? I was stupid forgot the account password. I love any help you can offer me
@Emmett Musa i really appreciate your reply. I got to the site on google and I'm waiting for the hacking stuff atm. Takes quite some time so I will get back to you later with my results.
Great video! I noticed threadlocker wasn’t used on the shifter mounting bolts. I too forgot that but got the bolts nice and snug. Have you or anyone else for that matter had issues not using threadlocker (blue) on this install? Am I going to have to redo everything?
Is there a way to identify the exact transmission you have in your car? I got mine swapped a while back with a 2001 mustang gt but don't know if it was an early or late model..
Hey Bill here's an idea, why don't I just make an appointment and have you install mine , so that I can continue to enjoy driving my car for years to come instead of having to wonder and worry about why the handle is in my hand, when I need to make a shift?!
I just bought this and now I can't install it because I can't get the shift knob off! I've tried everything. I took the shift out and put it in a vice, used locking pliers, leather strap wrench thingy. Spent way to much time on something that's supposed to be simple
Bill Tumas Hello ! I have a 2002 mustang gt and my problem with the transmission is that it doesn't go in to the neutral position when im done shifting (the car shifts normally but this irritates me ) any idea how can i fix this ?
Plastic clip stayed in trans when pulling out old. Didnt really snap in when dropping new shifter in like it did in video. Does anyone know of a stange poping sound when shifting? I suspect plastic clip is worn maybe?
Are you positive Bill. This is a reply straight from Tremec TSB's and Special Messages Tremec said: NOTE:From Tremec dated 03/01 Tremec Transmissions Service Bulletin 03.01 Subject: Aftermarket Shifter Stops Transmission Models Affected: All Severe damage may be caused by installing an aftermarket shifter with "shift stops" on any TREMEC transmission. All TREMEC transmissions are designed and manufactured with built-in shift stops to prevent over shifting. Therefore; shift stops on aftermarket shifters are totally unnecessary when used on a TREMEC transmission. TREMEC "TR series" transmissions have multiple shift rails with shift stops on the gearing. TREMEC "T
Great vid but I'm shocked Steeda wouldn't include a new plastic ball for the bottom. That would serve 2 purposes. 1) plastic wears down over time and can easily crack when removing from old shifter. 2) if the old one does stay in the trans while removing old unit a new piece installed on new unit will give the installer a reminder to remove the old one before buttoning it up because two of them will not fit
I love my new edge gt. Much quicker and more fun than the 05 v6 and gets more or less the same fuel economy. Maybe a tiny bit worse but come on, it's a mustang
dude get the new edge GT, no question about it. my friend just made that mistake. he bought a 2005 V6 and sold it just months later because it's a piece of shit. actually get a 2003-2004 Mach 1 if you can afford it. should be able to find one for around $10k. They're much faster than the GT, quarter mile in the low 13s bone stock. the GT is about a 14 second car. 13.9 at best.
Bought mine more then ten years ago and still going strong! Great and postitive shifts. Steeda make great parts! 2001 mustang gt, 4.9L mid compression stroker motor, match ported heads, xe270ah cams, bolt ons, 3.73 gears, bbk shorties, bbk x pipe, flowmaster catback. 308hp/328tq.
i know im randomly asking but does any of you know of a tool to get back into an Instagram account..?
I was stupid forgot the account password. I love any help you can offer me
@Gus Ulises Instablaster :)
@Emmett Musa i really appreciate your reply. I got to the site on google and I'm waiting for the hacking stuff atm.
Takes quite some time so I will get back to you later with my results.
@Emmett Musa it worked and I finally got access to my account again. Im so happy!
Thanks so much you saved my account !
@Gus Ulises you are welcome :D
Thank you Bill. . Your video helped me install my shifter today. My shifter didn't have instructions.
Glad it helped
I'm sure this has been asked before but what is the exhaust setup on the mustang at the end of the clip?
joselikescars it sounds like a cobra with borla stinger catback and stock mid pipe. could be wrong, i would like to know as well
Great video! I noticed threadlocker wasn’t used on the shifter mounting bolts. I too forgot that but got the bolts nice and snug. Have you or anyone else for that matter had issues not using threadlocker (blue) on this install? Am I going to have to redo everything?
Just got mine in the mail..took me 30 mins to remove stock shifter n install the steeda tri ax short Throw
You guys make the best videos!! Thanks!
Is there a way to identify the exact transmission you have in your car? I got mine swapped a while back with a 2001 mustang gt but don't know if it was an early or late model..
Usually said I’m the door jam, or on the transmission it’s etched in.
Hey Bill here's an idea, why don't I just make an appointment and have you install mine , so that I can continue to enjoy driving my car for years to come instead of having to wonder and worry about why the handle is in my hand, when I need to make a shift?!
I just bought this and now I can't install it because I can't get the shift knob off! I've tried everything. I took the shift out and put it in a vice, used locking pliers, leather strap wrench thingy. Spent way to much time on something that's supposed to be simple
Bill Tumas Hello ! I have a 2002 mustang gt and my problem with the transmission is that it doesn't go in to the neutral position when im done shifting (the car shifts normally but this irritates me ) any idea how can i fix this ?
bahahah. that rtv job.. was it even on the lip? anyways, great vid.
+mtd610 The camera has to see it so that means I can't. Still not bad for guessing
Plastic clip stayed in trans when pulling out old. Didnt really snap in when dropping new shifter in like it did in video. Does anyone know of a stange poping sound when shifting? I suspect plastic clip is worn maybe?
Where do you guys find the filthy guitar riffs?
Just a quick question. Doesn't the tr3650 have internal stops. I hear you have to back them all the way off or could cause transmission problems.
There are stops but set the stops on the aftermarket shifter.
Are you positive Bill. This is a reply straight from Tremec
TSB's and Special Messages
Tremec said:
NOTE:From Tremec dated 03/01
Tremec Transmissions
Service Bulletin 03.01
Subject:
Aftermarket Shifter Stops
Transmission Models Affected:
All
Severe damage may be caused by installing an aftermarket shifter with "shift stops" on any TREMEC transmission. All TREMEC transmissions are designed and manufactured with built-in shift stops to prevent over shifting. Therefore; shift stops on aftermarket shifters are totally unnecessary when used on a TREMEC transmission. TREMEC "TR series" transmissions have multiple shift rails with shift stops on the gearing. TREMEC "T
Great vid but I'm shocked Steeda wouldn't include a new plastic ball for the bottom. That would serve 2 purposes. 1) plastic wears down over time and can easily crack when removing from old shifter. 2) if the old one does stay in the trans while removing old unit a new piece installed on new unit will give the installer a reminder to remove the old one before buttoning it up because two of them will not fit
Can i do the whole install from inside the car on a t56 03 cobra. i bought the steeda shifter for the t56
A couple bolts are a little harder to get to but yes you can.
Thanks buddy appreciate the response
What if you got a v6 3.8 fuel injected standard mustang will the short shifted fit
Yes
Just hoping my comment makes it to your facebook page! hahaha
Thorough rtv application will never leak im sure of that.
Has anyone designed a gated shifter for the Mustang? I have a problem with hitting 3rd all the time.
so this would fit my 04,40th anniversary gt?
Yes
New toys to put on the stang🐎
What seats are those??
+The Braulio's Daily Stock 03 GT
+Bill Tumas thanks brother I will get me a pair of those
Will this fit in a 2004 mustang v6
Yes it will.
what exhaust is on the car at the end?
BBK longtubes, off road X pipe, and Magnaflow cat back.
thanks bill. i had a feeling it was magnaflow mufflers
PS I guarantee the roads will be safer for everyone if we go with my idea!
I need help deciding between this or a v6 05. can't afford insurance on a 05 to 13 gt
I love my new edge gt. Much quicker and more fun than the 05 v6 and gets more or less the same fuel economy. Maybe a tiny bit worse but come on, it's a mustang
dude get the new edge GT, no question about it. my friend just made that mistake. he bought a 2005 V6 and sold it just months later because it's a piece of shit. actually get a 2003-2004 Mach 1 if you can afford it. should be able to find one for around $10k. They're much faster than the GT, quarter mile in the low 13s bone stock. the GT is about a 14 second car. 13.9 at best.
kingcrimson234 what usual problems did it have
I don’t like the way the shift knob is located & the way it was designed inside the SN95. It looks less sporty & more like a truck.
Not to offend SN95 owners but it’s just my opinion
id go with the Hurst shifter looks.nicer that one looks like a factory shifter once installed.
It looks factory but works WAY better which some people like.
Is this car for sale?
An hour for install??? Should take fifteen min lol
I went to change my shifter a hurst and found out my car already has a steeda trimax lol anyone want it? $30 lol