commrad10108325 ..... Those may be tabi socks. Japanese socks with a separate area for the big toe. They match the rubber soled, cloth shoes worn by carpenters. Some socks even have separate areas for each toe. Warm in the winter.
cutting Plexiglass on horse rather on a flat surface and then using a knife with free hands to deepen the cuts and mess it up......just brilliant work skills!!!
I think Your first scoring was good enough. If you used that leveler that I saw in the beginning to hold down the other side, along the score line, you will have gotten a good snap.. I just kind of did this, using two wooden yardsticks, one on each side and got the cleanest snap.. thanks for the video I know it was forever ago ,but if you didn't know at this moment socks and slides seem to be the thing now.lol
One score is good enough when it comes down to glass but plexiglass is a little different because it's plastic and it might not break right there on that line
Cutting perspex can be so tricky. Many times I've spent 10mins trying to cut perspex for picture frames and right at the end when I'm snapping it off it doesn't snap correctly and ruins the sheet that I can't use anymore.
This video was so TERRIBLY awesome I had to watch it again. I learned several things not to do + a great laugh the same time! No thumbs up or down even though I learned & laughed.
pretty much how to do it if you don't care how good it looks run the risk of cutting yourself by running your bare hand down the fresh edge wear flip flops so you can injure your foot/feet as a bonus actually this could be a video for how NOT to cut plexiglass
DON"T ever use the blade without some guide as the one he used, it's common that blade goes wrong direction & mess up the surface. and at least when you finish cutting try to bind it on something flat and has sharp edge as table.. like and thanks for the video
Good demonstration - and I'm cool about the socks versus flip flops - a matter of personal taste... I had difficulty following the spoken commentary though - what language was it?
My DIY idea to let my Cat come in and out of my sliding glass door from my apartment. I can buy a 20X16 piece Plexiglas for $2. Cut it into 4 strips and it'll be perfect, cheap, and easy.
This is why you don't take advice from someone wearing socks with flip flops. Those kind of people can't be trusted. The only thing in this video that has ever scored was the plexiglass.
soooo...i need a razor blade,a level,clamps and some goofy ass flip flops over my socks and i can make a horrible cut in plexiglass?thanks!this was utterly useless
@@junkintwin Like this ruclips.net/video/sFifcsgWk_c/видео.html You use the non cutting edge of the cutter. You make a few passes just on one side of the plexiglass ( from one edge to the other ) and... clack !
Are you doing a video or talking on the phone? I saw what you did but didn't get any instruction. It kind of looked like maybe you didn't know what you doing; I don't know...?
Thankyou for the video... One thing that bothers me about it though socks with flip flops
commrad10108325 ..... Those may be tabi socks. Japanese socks with a separate area for the big toe. They match the rubber soled, cloth shoes worn by carpenters. Some socks even have separate areas for each toe. Warm in the winter.
Yulp bothered me not sure why but it did
Shoobie
😂😂😂😂😂
🤣🤣
Excellent video how to NOT cut plexiglass.
we just going to ignore the "so if I wasn't married" and "your alot more fun than I thought" 😂 ...
Brittani Long yeah that's why I read comments I wanted to see if he got busted on the comments if I wasn't married boooy she'd cut it off
Sometimes, the funniest videos are the ones that are not meant to be funny at all.
And the comments are just as good also.
Thanks for cheering me up!
From what I've read on line most fine tooth power saws can cut plexiglass for most needs.
cutting Plexiglass on horse rather on a flat surface and then using a knife with free hands to deepen the cuts and mess it up......just brilliant work skills!!!
not
I think Your first scoring was good enough. If you used that leveler that I saw in the beginning to hold down the other side, along the score line, you will have gotten a good snap.. I just kind of did this, using two wooden yardsticks, one on each side and got the cleanest snap.. thanks for the video I know it was forever ago ,but if you didn't know at this moment socks and slides seem to be the thing now.lol
No support
No snap
One score is good enough when it comes down to glass but plexiglass is a little different because it's plastic and it might not break right there on that line
So is it a specific kind of razor or knife? lol was too busy staring at the socks with flip-flops...
"I should have scored it a little bit better!" Good object lesson.
Cutting perspex can be so tricky. Many times I've spent 10mins trying to cut perspex for picture frames and right at the end when I'm snapping it off it doesn't snap correctly and ruins the sheet that I can't use anymore.
one should never risk going to a bachelor party without a sheet of plexi
I made my mother-in-law's casket using this method; hope she uses it soon 😀
Lmao
How bout cutting in curves eg. For a vehicle side window
a man who takes pride in his work
you have a peculiar voice and my cat wants to meet you!
table saw usually works pretty good.
Why do people downvote this video? I found nothing wrong with it. +1 from me.
Delphi Builder socks with sandals most likely
Do you feel qualified to give lessons while doing something for the first time?
@@Savior-ml4pq LOL!!!! Just noticed!!
GhettoRanger yes I do!
@@Savior-ml4pq Obviously, but you really aren't.
Nice wavy line there partner.
That toe wedgie is next level. Well done.
put painterstape on both sides and take a jigsaw or cirklesaw make sure the cutting line is in the middle of the tape.
BS This doesn’t work. Just tried it. Ruined two whole sheets.
@@gregc.9313taping and circular saw or a table saw has worked for me everytime I tried. You might need a different blade
Thank you for this teaching video❤
Very informative. Ignore the tools commenting on your feet.
This video was so TERRIBLY awesome I had to watch it again. I learned several things not to do + a great laugh the same time! No thumbs up or down even though I learned & laughed.
easy peezy. Very helpful.
Can’t beat a table saw, or circular saw with a carbide saw blade for clean cuts on acrylic (plexiglass), or polycarbonate (lexan).
pretty much how to do it if you don't care how good it looks
run the risk of cutting yourself by running your bare hand down the fresh edge
wear flip flops so you can injure your foot/feet as a bonus
actually this could be a video for how NOT to cut plexiglass
You people don't know something from nothing!!!!
can't you see those are safety socks and anti-slip non trip multi grip flip-flops
You're obviously using a utility knife first-but what kind of knife is the 2nd one? Details, dude.
Very nice method
thanks just learned something thanks to you!
DON"T ever use the blade without some guide as the one he used, it's common that blade goes wrong direction & mess up the surface.
and at least when you finish cutting try to bind it on something flat and has sharp edge as table..
like and thanks for the video
Good demonstration - and I'm cool about the socks versus flip flops - a matter of personal taste...
I had difficulty following the spoken commentary though - what language was it?
Richard Buxton He is on a telephone, there is no commentary.
fthrust What then is the mouse-like squeaking at the beginning?
Richard Buxton It's being sped up.
+Richard Buxton
it was chipmonk
Thanks for the vidéo , i've a question if i Can yo yoused the chain saw in order to cut or not .
What about cutting inside corners or just shapes in general?
Now Enter the "professional" plexi cutters..🙄..Everybodys a critic....lol
So did this the other day and got way too many fractures than I wanted. Couldn’t find my rotatory so I used a hot knife
You know he got in trouble after posting this video
"So your saying if I wasn't married"😅😅
Thanks, i was going to do it without the clamps
What a flamer. He wears socks with flip flops
good job for a chipmunk !
how thin is that sheet?
Hey Sir, you did'nt tell he how to cut it, i'm just kidding sir, i pay attention, that was did real nice.
Socks and sandals loool
Yea what a epic fail I go through five times then snap it
great work! you look like you have done this before.
Plexiglass umbrella. please .
My DIY idea to let my Cat come in and out of my sliding glass door from my apartment. I can buy a 20X16 piece Plexiglas for $2. Cut it into 4 strips and it'll be perfect, cheap, and easy.
How do you do curves?
This is why you don't take advice from someone wearing socks with flip flops. Those kind of people can't be trusted.
The only thing in this video that has ever scored was the plexiglass.
So how was the bachelor party?
damn- he works fast!
So what are you using?????? What kind of knife what make how many scores do you make???
soooo...i need a razor blade,a level,clamps and some goofy ass flip flops over my socks and i can make a horrible cut in plexiglass?thanks!this was utterly useless
lololol
LMFAO LOL
Danny Roach hahaha!!!
Goddamn! So many people in these comments wanted to see dude without socks 🧦!!!
Freakin’ foot fetishists. 🙄
I just want to know the story of the phone call.
More like how not to cut plexiglass.
How would u cut plexiglass? I got a piece. But can’t afford to screw it up lol
@@junkintwin Like this ruclips.net/video/sFifcsgWk_c/видео.html
You use the non cutting edge of the cutter. You make a few passes just on one side of the plexiglass ( from one edge to the other ) and... clack !
Did u sale that here in the phil? How much per 4x8
Are you doing a video or talking on the phone?
I saw what you did but didn't get any instruction.
It kind of looked like maybe you didn't know what you doing; I don't know...?
Oh gawd socks flips and stepping on pants backs triggered
This guys wearing socks with flip flops
i feel this is some kind of abstract video
Flip flops and sox LMFAO!
you should have left the straight edge on to break the cut against
There's gotta be an easier way. Maybe they sell a plexiglass cutter.
Clamping down a level may not be a good idea. I'd use a sheet rock square or a length of metal.
thneks very good
Thanks man
How to cut plexiglass - smash Shane McMahon’s head through it
Never works for me always breaks off the mark
Toop
Got it.
what is the size of that whole plexiglass
socks in that flip-flops xDDD
2024 right now😂
This only works 1 times out of 10. I ruined $90 worth of plexiglass this way once.
"ALVIN!" Where's Alvin?
Hey! I have the same sheets
Super merci.
What size is this ?
thick?
I Do my very best, miss sophy 😈
I wanted to hear the rest of the gossip “so you’re telling me if I wasn’t married”…. 🗣️ what?! What happened next?!
talking about moving to a warmer climate
Ninja cut
omg, flip flops and socks....
Thanks! Now just stop the socks with flops
Sar is shet ko kya bolte hai or kha milege or kitne rupe foot milege
No one mentioning the commentary in the background?
Don't bother telling us the name of the tool you are using, or anything. That would be too obvious.
Thanks
That's thick too
7 fit sheet kya rate hai
You must watch a tutorial video Mate!!!
Just use a saw already
So is this how not to cut?
Kya parice hai
Grazie del video ...
Ma ti prego non presentarti con calze e infradito!!!!!😫
What is the purpose of your video?
you have hand sweat
AYE. Leave the socks and sandals out of this.. lbs
Should be titled: How NOT to cut plexiglass
Socks and sandals