Riso SF5030 Installation & Demonstration - Makwassie, North West
HTML-код
- Опубликовано: 13 сен 2024
- View this Installation video featuring;
1.Unboxing
2.Set Up
3.Drum removal & replacement
4.Master roll removal & replacement
5.Ink removal & replacement
Error code F-30-426 solution
1. Remove all paper from feed tray
2. Let the tray go down to the start position
3. Switch off device
4. Clean Stripper Pad and Pick Up Rollers
5. Replace Paper and Re-test
6. If error persists replace pick up rollers and separation pad
I HAVE THE SAME RISO, SF 5030 BUT I GET THIS ERROR A06-403, PLEASE HELP ME CLEAR IT.
Code: A06 403
Description:
• Paper feed tray is at the upper limit position or lower limit position.
Causes:
Paper feed tray set switch is OFF. * Not detected while in the low power mode (24V OFF).
Remedy:
Paper feed tray upper limit set switch: ON or • Paper feed tray lower limit set switch: ON
Where is the switch positioned?