60700 views in 17 months =3500 / month 120 views / day I guess alot of you have been helped by this clip. Thanks for watching, and to you 4 people that have done thumbs down on me, Hope you liked it a bit.
i guess Im randomly asking but does someone know a trick to get back into an Instagram account..? I was dumb forgot my login password. I appreciate any help you can give me.
@Kenneth Shawn thanks so much for your reply. I got to the site thru google and im trying it out now. Seems to take a while so I will reply here later when my account password hopefully is recovered.
Great video. And I like this guy's attitude, nothing seems to get him angry. And he damn sure knows what he's doing. VERY helpful info for my 606 build. Thumbs up dieselmeken!
First of all awesome video. I own two 95 E300D's and one of them is running rich and has bad power when in Drive. I will check the IP timing since i never checked it when i didnt he timing chain job, whish me luck friends.
So swapping over to the mechanical pump i understand... what about the injectors? To make it run completely without electronics would you not need to swap over to mechanical injectors as well? I'm trying to google this but having a hard time finding the needed material for my research.
Is there a difference between OM603 N/A and OM603 turbo injection pumps ? If yes, what are these ? I need to buy one for my OM606 and I have been told they are the same. Thank you
Where I can purchase that pump tool that shows the TDC with diodes? I'm currently installing om606.962 with 722.6 to 83 toyota hj60 and little pump work would be appreciated
Thanks Goran. I've been wanting to see somebody post a good video of this. At 9:30 after first attempt fitting pump the sprocket splines bound up. Could pre-lubricating shaft with grease on pump avoid this?
Írok hátha akad itt magyar aki tudja választ a kérdésemre. mikor ellenőrzi a tárcsán a fokolást de hiányzik a blokkra felszerelt kis lemez. akkor a menetes furat közepéhez nézi a fokolást?
Forstår ikke😅 du brukte mye elektronikk. Hva med og sette motoren først 10-12 grader etter øvre døpungt. Ta ut pompan og sette in den nye og justere riktig da?
wow great video, thanks a lot I search for something like this for many days and finally found it. but please I would like to ask you something, what if I don't have that machine for the diodes, how can I make sure that am installing in the right way my diesel pump? thank you so much
Hello, I watched your video om606, and I need your help. I have a w140 Mercedes om 606, 1996.sharply gone idle, diagnostics shows error at the sensor konval, sensor is OK,you know this is a problem! I have a video of the engine running!thank you!
fucking righteous. you are going to save people a lot of headaches, broken pumps, and money from mechanics who don't know what they are doing. what is that tool and how much is it? thanks again.
Chris Wall It's a ""Diesel injection static position indicator"and can be purchased here, the only website I could find and it's pretty expensive. But I do believe there's more websites that offer these and I'm pretty sure MB themselves offer this tool at a more reasonable price ($200-300) www.ecstuning.com/Mercedes_Benz-1985-300D-123.133-Base-Sedan-L5_3.0L/ES1818573/
60700 views in 17 months =3500 / month 120 views / day I guess alot of you have been helped by this clip. Thanks for watching, and to you 4 people that have done thumbs down on me, Hope you liked it a bit.
Wish youd show what was needed to swap a om604 mechanical pump on a 606
They are sour DPUK employees
i guess Im randomly asking but does someone know a trick to get back into an Instagram account..?
I was dumb forgot my login password. I appreciate any help you can give me.
@Brycen Nicolas Instablaster =)
@Kenneth Shawn thanks so much for your reply. I got to the site thru google and im trying it out now.
Seems to take a while so I will reply here later when my account password hopefully is recovered.
Great video. And I like this guy's attitude, nothing seems to get him angry. And he damn sure knows what he's doing. VERY helpful info for my 606 build. Thumbs up dieselmeken!
It seems you don't know Swedish hahahahaha
Do what you love , this is the life ! Keep going !
By this you can tell you are very talented! im really in to this myself, diesel power for life!
First of all awesome video. I own two 95 E300D's and one of them is running rich and has bad power when in Drive. I will check the IP timing since i never checked it when i didnt he timing chain job, whish me luck friends.
Good video.. doing this now. Putting engine in a 80 gmc 2wd truck.. going to order your pump once I get more bigger budget.
the timing tool is pretty expensive... but if i get everthing right... it must be possible to do the same trick with the locking tool, or am i wrong?
"Bloody Radar crew, using my 8mm spanner for stirring their tea."
"Is this engine ready yet?"
Thank you for great video….
Nice work goran. Been doing the same job today!!
What electronic tool are you using to time pump? what's specification for timing degrees?
typically 14.5 for edc pump 11-13 for mechanical injection pump swaps , best to ask dieselmpumpuk
Is this installation of a mechanical pump in place of the 606 electronic pump?
Kul att se en duktig mekaniker 😜🤘
So swapping over to the mechanical pump i understand... what about the injectors? To make it run completely without electronics would you not need to swap over to mechanical injectors as well? I'm trying to google this but having a hard time finding the needed material for my research.
Is there a difference between OM603 N/A and OM603 turbo injection pumps ? If yes, what are these ? I need to buy one for my OM606 and I have been told they are the same. Thank you
Found the differences myself on the superturbodiesel site. Good info there
+Titus Toma That was a good question, I'm looking to do the same, what was the answer? lol
Love your show, where can I buy one of those timing tool ? Keep up good work.
WHERE DO I BUY THE PUMP TIMING TOOL WITH THE GREEN LIGHTS FROM SHARE THE LINK FOR THIS TOOL PLEASE THANK YOU
I'm from Algeria thank you for this video
tack så mycket för informationen
Vad heter de där elektriska verktyget?
Så du trenger den elektroniske timern for å bytte pumpe? jeg skal bestille fra dere og har ikke den elektroniske timern.
This guy is my new hero
Does anyone know if it's possible to replace the pump timing gear without actually removing the injection pump?
One word - BRAVO 👏👏👏
2:32 var köper jag denna verktyg? Svara plz
Vad kallas verktyget med lamporna som du kollade pumpens nolla med?
Dannnehotmail Det är en "Diesel injection static position indicator "
Can someone help me find this left threaded bolt on the internet? At 6:14
where can you get the timing diode light box ?
Where I can purchase that pump tool that shows the TDC with diodes? I'm currently installing om606.962 with 722.6 to 83 toyota hj60 and little pump work would be appreciated
Thanks Goran. I've been wanting to see somebody post a good video of this. At 9:30 after first attempt fitting pump the sprocket splines bound up. Could pre-lubricating shaft with grease on pump avoid this?
How many degrees BTDC is the static start of injection? How much does it advance to at full rpm?
Whats the size on the oring and whats the nm on the bolt? Thx :)
Молодец братуха! Тысячи лайков!!!
Just what I wanted to know. Thanks a lot!
Írok hátha akad itt magyar aki tudja választ a kérdésemre. mikor ellenőrzi a tárcsán a fokolást de hiányzik a blokkra felszerelt kis lemez. akkor a menetes furat közepéhez nézi a fokolást?
Igen. Normál esetben egy hegyesre munkált stift van a furatban, a fokolást hiányzó stiftnél ezért a furatközépponthoz kell állítani.
When changing the electric pump to a mechanical pump. do I have to tweek the ecu?
Yes you can remove it :D No seriously , you dont need the ECU with mechanical pump
thank you dieselmeken very cool!
Tusen tack för videon Göran! Vet du vad "blockerings verktyget" heter på Engelska? Eller ett artikelnummer.
Where could I buy a om606 manual injection pump please
Benz injection
Forstår ikke😅 du brukte mye elektronikk. Hva med og sette motoren først 10-12 grader etter øvre døpungt. Ta ut pompan og sette in den nye og justere riktig da?
Fantastic video. thank you
top video , tusen takk !
❤❤❤
Skulle nog uppskattas om du gjorde en liknande fast på en 603a (Y)
wow great video, thanks a lot I search for something like this for many days and finally found it. but please I would like to ask you something, what if I don't have that machine for the diodes, how can I make sure that am installing in the right way my diesel pump?
thank you so much
Any clip that shows how to take down IP from an (bmw and some rovers, i think) M51/M41 diesel engine ? :))
hej jag ska fråga dej 4 silender är det sama
Where is your shop located?you do good work
Hello, I watched your video om606, and I need your help. I have a w140 Mercedes om 606, 1996.sharply gone idle, diagnostics shows error at the sensor konval, sensor is OK,you know this is a problem! I have a video of the engine running!thank you!
hi were can I buy the tool with diode light thanks
Just asking, did you manage to find this device. Thanks
Great, love it :) will be doing the same this weekend ;)
Is this about the same procedure for an OM603?
Good day, did you ever find out if it’s the same procedure for the 603?
It is the exact same☺️ The engines are identical, only real difference is the head
İs it the samom602
is this the same procedure on om617? also where can I get fancy device?
Great video Man! Genius. Do you sell the rebuilt OM606 140mm IP on a website or do you just send old one in? Best regards, sam
U tryna get get that gigantosaurus engine runnin
Приятно посмотреть на работу человека!
The same person steals my tools also!
Do you usually swear in Swedish, or in English?
Fideo gwych-diolch yn fawr / Fantastic stuff and great video - Thanks..Wales, Uk
Hej varför är du så stressad när du mekar ? Finna filmer förövrigt
Mekanik pompa kilidi takili iken ot ne olmalı
We need an audited mercedes om605 engine timing video. thank you
Same deal
Thumbs Up brilliant , ca u recommend someone in London uk, who does similar work
Сколько будет стоить свап ом 606/964 движок ваш
معلم
Добрый день!
Подскажите сколько стоит сделать насос ТНВД тюнинг ему ?
Пишу с Севастополя!
Спасибо за видео!)))
14.5 после вмт?
До вмт
Ermek Alikov так и поставил, дымит белым, не догорает, нужно больше поставить ? Например 16-17 ?!
Нет это уже предел.
Может причина в другом?
Ermek Alikov в чем? Было где то 10-9
Ermek Alikov и дыма не было, а сейчас на холодную дымит так
Awsome.... Pink Floyd too!
David Bowie
I love you
Hi there all
Looking for a 606T
Based in South Africa
Anyways of getting one here
Love it
what language is this ,,please
Swedish
fucking righteous. you are going to save people a lot of headaches, broken pumps, and money from mechanics who don't know what they are doing.
what is that tool and how much is it?
thanks again.
Chris Wall It's a ""Diesel injection static position indicator"and can be purchased here, the only website I could find and it's pretty expensive. But I do believe there's more websites that offer these and I'm pretty sure MB themselves offer this tool at a more reasonable price ($200-300)
www.ecstuning.com/Mercedes_Benz-1985-300D-123.133-Base-Sedan-L5_3.0L/ES1818573/
Mercedes does offer it and it is the same exact tool offered on the ecstuning site. although i haven't checked on the price from a dealer
good vid man
Âlet çalışır el övünür çok güzel olmuş
good
"Нихуя не понятно, но очень интересно!" Good job
Åker en orignal mercedes c 250td -96 44k nu still strong :D
You should have been a Swedish chef....😂
J'aime beaucoup ca
C’est l’appareil qui l’a utilisé pour cale la pompe
helo sell??????????????
I did not see the other one
Omg you bent your valves
Fan vad stressad han är🤣
308
308D ķrenk kasaft tamie
Just shows that mechanics are the same everywhere. Where is my shit? This tool is shit. Whatever im stuck working on is a piece of shit lol.
Mortser pomp