TWO Unpickable (?) Locks for Lock Picking Lawyer!

Поделиться
HTML-код
  • Опубликовано: 30 окт 2024

Комментарии • 13 тыс.

  • @StuffMadeHere
    @StuffMadeHere  3 года назад +6728

    This was a really neat project and working with LPL was really fun. Check out his video to see what he thinks: ruclips.net/video/Ecy1FBdCRbQ/видео.html
    Also, directors commentary about making my lock on stuff made here 2: ruclips.net/video/8CWsA22H35Y/видео.html

    • @kailacantu364
      @kailacantu364 3 года назад +22

      This was very cool to watch live :)

    • @Roy28_29
      @Roy28_29 3 года назад +13

      Damn why did you not put the picking on your channel?

    • @ivanchik007
      @ivanchik007 3 года назад +5

      what is the song with the flute?

    • @necaton
      @necaton 3 года назад +8

      that was very entertaining!
      you should do more collab videos :)

    • @yashmaurya481
      @yashmaurya481 3 года назад +5

      Can you tell what cad software you used?🙏

  • @9ED6F5E1
    @9ED6F5E1 3 года назад +9744

    Screw the RUclipsr boxing matches, this is the fight I want to see.

    • @Chris-dg6km
      @Chris-dg6km 3 года назад +103

      There is a click on one.... I think I just ran into the "wife detection" feature.

    • @dylandepetro4187
      @dylandepetro4187 3 года назад +47

      I too can’t wait. But then again, knowing LPL, it’ll most likely be only a 5 minute video. Lol. LPL need to learn how to slow down a little.

    • @brygaming7403
      @brygaming7403 3 года назад +5

      YESSSS

    • @mfuentesll2908
      @mfuentesll2908 3 года назад +3

      ª

    • @r3cker718
      @r3cker718 3 года назад +1

      Yes I agree

  • @jonathansiles5120
    @jonathansiles5120 3 года назад +23927

    Hope it lasts longer than a minute

    • @caltheuntitled8021
      @caltheuntitled8021 3 года назад +580

      I’m guessing it will take at least 3

    • @thenotoriousd.o.g2196
      @thenotoriousd.o.g2196 3 года назад +42

      same

    • @Dohzer
      @Dohzer 3 года назад +63

      Eso es lo que dici el?

    • @RageFanVg
      @RageFanVg 3 года назад +892

      That what she said. Sorry had to do it

    • @vitsalava1251
      @vitsalava1251 3 года назад +115

      I think the talk about the collaboration might lengthen it. The lock hopefully too.

  • @zackbudgen5333
    @zackbudgen5333 3 года назад +2406

    Why do I have to wait three days to see this epic show down. This is just cruel and unusual punishment

    • @NeverBelieveGovernment
      @NeverBelieveGovernment 3 года назад +21

      inhumane

    • @baha17222
      @baha17222 3 года назад +47

      Imean. U can sue him. There’s a lawyer coming soon

    • @MrSorbias
      @MrSorbias 3 года назад +23

      We modern kids are not grown up to wait things

    • @GerackSerack
      @GerackSerack 3 года назад +6

      Indeed, it is :^C

    • @Scrapcat
      @Scrapcat 3 года назад +16

      He's still attempting to pick the locks

  • @tonysmith9061
    @tonysmith9061 2 года назад +483

    Mad respect for having the balls to send your design to the Lock Picking Lawyer!!!

    • @JustaTwurtle
      @JustaTwurtle 5 месяцев назад +2

      Having balls is sending it to McNally

  • @kevinslater4126
    @kevinslater4126 3 года назад +730

    "I want him to defeat it so I can learn how to improve the lock"
    That, is an engineer.

    • @BCM1959
      @BCM1959 3 года назад +3

      Spoiler alert!
      He did.

    • @pensamentoazul
      @pensamentoazul 3 года назад

      @@BCM1959
      Never guessed why he start the video with the locks disassembled and schematic? Why do you think he does not show he trying to pick the lock? He clearly tried it and could not. So he viewed the schematics, disassembled the lock, looked for vulnerabilities and explain how this can be fixed. He just lock picked it after knowing how it works...

  • @belzedk
    @belzedk 3 года назад +1998

    Stuff: "These hinges could be my downfall"
    Lpl: "I gotta say he did the right thing because I definitely would have done that"

    • @vladimirirkhin
      @vladimirirkhin 3 года назад +43

      Loved that part

    • @Elfr0g
      @Elfr0g 3 года назад +64

      Hilarious that he welded the pins in instead of just flipping them to the other side of the door.

    • @scytheakse
      @scytheakse 3 года назад +6

      @@Elfr0g or just buy non removable pin (nrp) hinges

    • @stevie6420
      @stevie6420 3 года назад +6

      @@Elfr0g maby I'm missing something but if he puts the pins inside the door then the door wud have push in not pull out

    • @xor01
      @xor01 3 года назад +4

      @@Elfr0g then the door would open the wrong direction.

  • @thermon6945
    @thermon6945 3 года назад +2655

    LPL be like: “A lock is only as strong as its weakest link”
    *sets the wooden door on fire*

    • @inquisitorthornside3p494
      @inquisitorthornside3p494 3 года назад +106

      If the lock is unpickable and made of metal but The door si made of wood then it is better to just axe the door.

    • @wilsoncalhoun
      @wilsoncalhoun 3 года назад +44

      For real though, that's why most burglars and cops just kick the front door in. You can have the best lock in the world but if your door, frame, and hinges aren't hardened you're just wasting everyone's time.

    • @zer0legend109
      @zer0legend109 3 года назад +39

      @Glenda Angeles the method took 30 sec to execute, but to get into it he did testing and study the locks for a whole month, so it's not 30 sec

    • @leonardoresende3232
      @leonardoresende3232 3 года назад +3

      To be honest it is quite true , if he uses a blowtorch I doubt the thing would hold on long enough.

    • @livedandletdie
      @livedandletdie 3 года назад +6

      @@inquisitorthornside3p494 Excuse me, Mr. Door, may I AXE you a question? Does this axehead feel a bit choppy...

  • @owenhopkins4239
    @owenhopkins4239 2 года назад +1408

    This is a really neat and impressive design, however I had an idea that might make it even more un-pickable.
    It’s just a block of steel. No key hole. No moving parts. Just weld your front door shut.

    • @adler_dot
      @adler_dot 2 года назад +75

      Take of the ceiling, to go out cover yourself in oil when raining

    • @theentiretyofthelgbtq5479
      @theentiretyofthelgbtq5479 2 года назад +43

      @@adler_dot cant pick me if I'm 7503FT in the air

    • @yeetissheetsfoot60
      @yeetissheetsfoot60 2 года назад +12

      @@theentiretyofthelgbtq5479 cant pick open a door if its in space now can you

    • @user-bh8id7of7n
      @user-bh8id7of7n 2 года назад +6

      Funny thing is after being a welder and cutting through thick steel on a regular basis you realize it would be easy to break into anything, well that or break a flimsy window instead.

    • @Green_Sabot
      @Green_Sabot 2 года назад

      He's a genius a genius!

  • @TheRealGuywithoutaMustache
    @TheRealGuywithoutaMustache 3 года назад +14822

    I'm gonna be honest, having you guys collaborating is absolute bliss, would love to see a sequel to this

  • @joeobrien3703
    @joeobrien3703 3 года назад +325

    I love that they both realized how pumped everyone was and made a big thing out of it. RUclips is such a good platform for that kind of feedback.

  • @ethercept
    @ethercept 3 года назад +428

    The first "Set Reminder" for a RUclips video I have ever done.

  • @christopherleubner6633
    @christopherleubner6633 Год назад +229

    Interesting enough your lock idea is very similar to a S-A switching componenent for a modern nuclear weapon, except the pins are electronically activated and when the proper code is applied it can rotate the safety shutter out of the way arming the weapon. 🤓

  • @ZachGBM
    @ZachGBM 3 года назад +1453

    I’ve been refreshing LPL for months waiting for this video.

  • @StuffMadeHere
    @StuffMadeHere  3 года назад +3090

    The wait is almost over! I get asked multiple times a day when this is going to happen so now you know! Tune in this Monday to see my brand new lock and what the Lock Picking Lawyer makes of 'em. Set a reminder to get a notification before it goes live!

    • @DGBAntho
      @DGBAntho 3 года назад +12

      Already done

    • @MrBeklager
      @MrBeklager 3 года назад +28

      I have been waiting so long, searching all day for many months

    • @MrOldPal
      @MrOldPal 3 года назад

      Ok

    • @sevegarza
      @sevegarza 3 года назад +1

      Can't wait!!!

    • @Androish
      @Androish 3 года назад +1

      HYPE!

  • @ejvaz13
    @ejvaz13 3 года назад +1225

    This event literally changed my plans for Monday.

    • @loganbobrow9333
      @loganbobrow9333 3 года назад +38

      Lol there is probably no need as its gonna be a 2-3 min video knowing LPL 😂

    • @nathanbinns6345
      @nathanbinns6345 3 года назад +16

      @@loganbobrow9333 Yes but the SMH video will be at least 15 minutes or so, haha.

    • @Zack_Taylor
      @Zack_Taylor 3 года назад +3

      Why was Monday morning selected as a premier time? I'm going to need to be starting work.
      Was the weekend too convenient?

    • @circle1568
      @circle1568 3 года назад

      @@Zack_Taylor It was so they would upload at the same time since LPL was uploading on monday so SMH moved his to monday.

    • @nathanbinns6345
      @nathanbinns6345 3 года назад

      @@Zack_Taylor With time differences, for me it's coming out at midnight tonight. I can't decide if I want to stay up for it or not.

  • @JustAllinOneResource
    @JustAllinOneResource Год назад +35

    I don't think to many people breaking into homes will choose to pick a lock but try every window (out of view of the public), and working on it to see if the window will eventually give or go the fast route, take your trusty glass cutting tool, cut a hole in the window, and release the lock in a door or window. It's not fancy but I would think that would be a far better thing them wasting time on a lock.
    Nice work though, it did a great job.

    • @andrew-rn9ui
      @andrew-rn9ui Год назад +2

      Yeah real criminals don't pick locks from my experiences living in trap houses n going to treatment meeting a bunch of life long criminals,, none of em knew how to pick a lock 🤣 probably why they all got caught LOLOL

    • @AlitaGunm99
      @AlitaGunm99 Год назад +1

      I've heard of robbers just chainsawing a new doorway in the back wall.

    • @littlesnowflakepunk855
      @littlesnowflakepunk855 11 месяцев назад

      better yet, find a place with exposed door hinges. just knock the pins out and walk in. most of the breakins ive seen have been carelessly unlocked doors or windows where people just walk around back, take a box cutter to the bug nets, and open the window up.
      a lock only stops an honest man, there are loads of much easier ways to break into a place.

  • @JeffGeerling
    @JeffGeerling 3 года назад +2997

    This will break the Internet.

    • @egziverpendlebury2431
      @egziverpendlebury2431 3 года назад +37

      Stfu jeff

    • @Eagle-fl8jy
      @Eagle-fl8jy 3 года назад +31

      Yeah Jeff!... wait, what did he do?

    • @PKCubed
      @PKCubed 3 года назад +5

      Hi Jeff, nice to see you here.

    • @robinheller525
      @robinheller525 3 года назад +8

      I didn't even know you were on RUclips, I just knew your name from using your Ansible roles (thanks!). You being here makes this crossover even better to me.

    • @JeffGeerling
      @JeffGeerling 3 года назад +13

      @@robinheller525 This is the one thing that unites all in 2021.

  • @zenkichihitoyoshi9513
    @zenkichihitoyoshi9513 3 года назад +1000

    "THEY'RE UNPICKABLE"
    LPL: "alright guys, today we have a tough one, I have to use a twig, my eyes and more than thirty seconds"

    • @Webrunner6951
      @Webrunner6951 3 года назад +25

      Actually edc pocket knife.

    • @stefan0ro
      @stefan0ro 3 года назад +2

      😂

    • @leechowning2712
      @leechowning2712 3 года назад +10

      He took 10 minutes... But with a lot of explaining. The picking took about 4 minutes.

    • @Polyglot_English
      @Polyglot_English 3 года назад

      Детерминизм это Свобода 🤙 🤙

    • @foe9634
      @foe9634 3 года назад +7

      @@leechowning2712 Lol he picked the first lock two times, both times less than a min! they lasted less than a min

  • @smartereveryday
    @smartereveryday 3 года назад +8001

    Love it. You’re both so great.

    • @weebamine9827
      @weebamine9827 3 года назад +5

      Hi

    • @nathangregory6664
      @nathangregory6664 3 года назад +9

      You should join in on the fun

    • @avivbintangaringga
      @avivbintangaringga 3 года назад +8

      Hi dusty

    • @hachiman236
      @hachiman236 3 года назад +3

      Where is your colab with him about the baseball bat? PLEASSSSEEEEEEEEEEEEEEEEEEE

    • @bungalo50
      @bungalo50 3 года назад +4

      Would've been kinda weird NOT to see Destin here lmao

  • @douggale5962
    @douggale5962 Год назад +38

    3:20 The zoom poisoning thing happens to me in EDA tools too. After a few hours in a PCB design program, 1mm is perceived as a gigantic trace.

  • @tommytoker9072
    @tommytoker9072 3 года назад +323

    I am unbelievably excited for this, 2 creators I watch independently, now fight for success in their field. One with the epic ability to bypass security systems just by looking at locks, the other a engineering genius with the ability to create (and occasionally destroy) through the power of science and invention!

    • @jakevuckturd1201
      @jakevuckturd1201 3 года назад +1

      *an

    • @Papacarrot
      @Papacarrot 3 года назад +3

      @@jakevuckturd1201 Bruh

    • @laurensjvg
      @laurensjvg 3 года назад +2

      making an unpickable lock isn't impossible and has been done before (bowley lock), so you dont have to be this excited.

    • @lvl30dragon
      @lvl30dragon 3 года назад

      @@jakevuckturd1201 shut up no one cares

    • @lvl30dragon
      @lvl30dragon 3 года назад

      @@laurensjvg it's has nothing to do with the lock, but everything youtuber A has done shows to youtuber B who works with locks to see if he can open youtuber A's lock

  • @scott_hunts
    @scott_hunts 3 года назад +1661

    “Today we’ll be defeating these locks with the milling machine that Bosnian Bill and I made”

    • @electricwaster
      @electricwaster 3 года назад +135

      “Today we’ll be defeating these locks with the nuclear warhead that Bosnian Bill and I made”

    • @Rich_ard
      @Rich_ard 3 года назад +28

      Yep, not drill resistant at all lol

    • @MrBaconbyte
      @MrBaconbyte 3 года назад +41

      It says good things about the lock when you need to use a custom tool you and another lockpicker built because it just didn't exist.

    • @Jehty_
      @Jehty_ 3 года назад +6

      @@MrBaconbyte depends.
      Ones that Tool is out in the public the lock can be useless.

    • @stephenbeck7222
      @stephenbeck7222 3 года назад +12

      MrBaconbyte disk detainer picks existed before LPL and BB made their own, they just weren’t very good and locksmiths with any self-respect would modify them.

  • @westsenkovec
    @westsenkovec 3 года назад +845

    _"I made two unpickable locks"_
    Narrator: Or so he thought..

    • @dimitritzer5028
      @dimitritzer5028 3 года назад +7

      I read that in Morgan Freeman's voice XD

    • @seanj3667
      @seanj3667 3 года назад +4

      @@dimitritzer5028 We all read that in Morgan Freeman's voice.

    • @fr3e.
      @fr3e. 3 года назад

      Somewhere in the distance: “this is the lockpicking lawyer...”

    • @kevinjbakertribe
      @kevinjbakertribe 3 года назад

      @@fr3e. "... click out of one, nothing on 2...."

    • @coylezo
      @coylezo 3 года назад

      @@dimitritzer5028 I tried to but I could only hear Morgan freeman from family guy 😅

  • @kenwohleking8819
    @kenwohleking8819 2 года назад +24

    6:45 “It’s a weird way to make a key but it works.” - “I just spent several hours machining these pins and just realized you can buy these for like a penny.” 🤣🤣🤣🤣 Love the honest sense of humor probably just as much as the engineering creativity.

  • @jake9705
    @jake9705 3 года назад +1460

    10:59 -- "Worried about some [obscure] tool to defeat my lock"
    LPL: "So here's my pocket knife"

  • @lesluna34
    @lesluna34 3 года назад +649

    "I'm worried that there's some tool that I've never heard of..."
    A knife and a mallet. 🤣🤣🤣

    • @TheAyanamiRei
      @TheAyanamiRei 3 года назад +12

      Didn't he also use some pliars for the top lock>
      Though yeah, that was DEFINITELY rather clever.

    • @SaltNBattery
      @SaltNBattery 3 года назад

      you could do it with a pocket knife and a flathead screwdriver..

    • @ch4.hayabusa
      @ch4.hayabusa 3 года назад +1

      @@TheAyanamiRei he didn't have to use a plier and mallet... Lots of common bump picking tools cause the vibrations the mallet did while providing torque at the same time. Look at the German made Multipick Kronos, for the most luxurious of these. Also common quite impact drivers on a low setting could do the same, while simultaneously providing torque. All the aforementioned rake tools could also act as tensioners, obviating the need for pliers.
      Mallets and pliers are just really common among locksmiths for bumping attacks and extremely mainstream. The difference between a good electropicks and other vibrating devices, is the pivot point is far forward and have high inertia.
      ruclips.net/video/eSghBUIJe1o/видео.html

    • @electronresonator8882
      @electronresonator8882 3 года назад

      that's how you humiliate an engineer

  • @matthewbarrett7616
    @matthewbarrett7616 3 года назад +288

    I just love how we get to wait for an entire weekend for a video that’s probably going to be around 2 minutes at most

    • @Visitingwombat
      @Visitingwombat 3 года назад +24

      have faith

    • @toxicgood9687
      @toxicgood9687 3 года назад +27

      @zomgthisisawesomelol hey be nice stuffmadehere put in alot of work into the lock
      2min excluding the intro should be possible

    • @guy2574
      @guy2574 3 года назад +4

      You guys all know locks have literally defeated him before right? It will definitely be at least eight minutes.

    • @funforall9741
      @funforall9741 3 года назад +5

      You never know, it could be so incredible that it lasts 3

    • @degruggir1483
      @degruggir1483 3 года назад +1

      @@funforall9741 if the LPL starts to roast it at the end of the video sure xD

  • @skateraptor12
    @skateraptor12 2 года назад +20

    I think it would be interesting to do a final review of the finished product and see if it could be picked, and if not, discuss other possible weaknesses. It would be cool if you and LPL made a truly perfectly balanced lock

  • @nosc0pe
    @nosc0pe 3 года назад +7329

    This is the lockpickinglawyer, and today I will open these locks in 2 milliseconds using nothing but my bellybutton lint

    • @GerackSerack
      @GerackSerack 3 года назад +75

      I'm hoping he'll use drilling xD

    • @BeAsYouAre108
      @BeAsYouAre108 3 года назад +121

      I don't know. I think he may need a new tool that he and Bosnian Bill made just for these locks.

    • @damn8648
      @damn8648 3 года назад +18

      Eww who tf has belly button lint

    • @Titian083
      @Titian083 3 года назад +83

      @@damn8648 anyone that wears shirts and has a bellybutton

    • @damn8648
      @damn8648 3 года назад +58

      @@Titian083 well that explains it i am always nude

  • @Wolfhound_81
    @Wolfhound_81 3 года назад +728

    You failed to give him the biggest challenge ever: Packaging consisting only of duct tape.

    • @penpen2672
      @penpen2672 3 года назад +49

      LPL's Worst Enemy: Duct tape

    • @SK_Wizzard
      @SK_Wizzard 3 года назад +26

      We need slash resistant duck tape againsthis edc knife

    • @vince77-z27
      @vince77-z27 3 года назад +10

      because the time to open the duck tape packaging actually longer than picking the lock!!

    • @Hitycooking
      @Hitycooking 3 года назад +1

      ruclips.net/video/Y_WbZgcjPLoi/видео.htmlrur

    • @teufel8647
      @teufel8647 3 года назад +2

      Yeah... Duct tape is far harder for him to open than locks.

  • @chris2790
    @chris2790 3 года назад +843

    "I just spent several hours making these pins and just found out I could have bought them for a penny" LOL, love it!

    • @aesieaiyahcloe
      @aesieaiyahcloe 3 года назад +4

      When you realize they'd been doing these thing for cheap for decades. 😅

    • @Rising_Pho3nix_23
      @Rising_Pho3nix_23 3 года назад +2

      That's what I say every time I complete some programming task

    • @niogel
      @niogel 3 года назад +3

      Just wait when he realizes that weeks of work was for nothing when the Lockpicking Lawyer gets through it in under 5 min.... 🤣

    • @Rising_Pho3nix_23
      @Rising_Pho3nix_23 3 года назад

      @@niogel that kinda happened

    • @robertkesselring
      @robertkesselring 3 года назад

      That's me on most home projects.

  • @RobertHolzler
    @RobertHolzler 2 года назад +8

    Looking at your gear solution (4:39) I think you could make that work by adjusting the gear ratio so the bottom cylinder rotates faster than the top. Also, instead of using a single solid pin (blue in your illustration), you could stack short pins (red in your illustration) in that lower pin area. Just an idea 🙂

  • @justinharris3910
    @justinharris3910 3 года назад +563

    LPL is about to hit you with, "In any case, that's all I have for you today."

    • @ACoustaDC
      @ACoustaDC 3 года назад +11

      And as always, I hope you learned something.

    • @AxxLAfriku
      @AxxLAfriku 3 года назад +1

      ATTENTION BROTHER!!! I have two very very sweet girlfriends who I show off (I smell like 100 not-alive orangutans oh nooo) in my perfectly great videos that most people consider to be the reason of life! Thank you for you attention, dear dude kid jus

    • @leejoyner4532
      @leejoyner4532 3 года назад

      @@AxxLAfriku he already did, I came here from that video.

    • @panmig
      @panmig 3 года назад

      @@leejoyner4532 Hello person from 3 seconds ago.

    • @StevenQDeadrock
      @StevenQDeadrock 3 года назад

      And here it is 20min after your comment: ruclips.net/video/Ecy1FBdCRbQ/видео.html

  • @danchimento
    @danchimento 3 года назад +265

    I’ve opened RUclips everyday waiting for this.

    • @WesYarber
      @WesYarber 3 года назад +2

      Me too man.

    • @theepicosityofpizza
      @theepicosityofpizza 3 года назад +4

      Same! I cannot tell you how many times I've scoured LPL's channel hoping I just missed it

    • @abdussamiurooj3936
      @abdussamiurooj3936 3 года назад +1

      Well it does mention the remaining time so you don’t have to open RUclips everyday
      (R/whoosh)

    • @sahilchaddha2612
      @sahilchaddha2612 3 года назад

      me too

    • @poppaganja3793
      @poppaganja3793 3 года назад

      @@abdussamiurooj3936 ruclips.net/video/EWTtBhgGnSA/видео.html

  • @SeanHodgins
    @SeanHodgins 3 года назад +3247

    Ah yes, the tried and true method of designing something by staring at the blank canvas of some CAD software for hours. Works. Every. Time. I love tiny overengineered mechanisms.

    • @tanmay______
      @tanmay______ 3 года назад +32

      This is too relatable to be funny..

    • @xxportalxx.
      @xxportalxx. 3 года назад +37

      @@tanmay______ oh man, so relatable in so many different ways, same thing when you're writing code from scratch, coming up with the integral or differential mixing problem... *insert random stem problem here* lol

    • @natelarsen2914
      @natelarsen2914 3 года назад +8

      This is so relatable I can’t help but die laughing!

    • @jadelahmad
      @jadelahmad 3 года назад

      yes

    • @Shaltinanwenor
      @Shaltinanwenor 3 года назад +5

      Writer's block has nothing on CATIA existential dread

  • @jhtsurvival
    @jhtsurvival 2 года назад +5

    One of the best anti pick locks I've come across IMO was this old Yale dead bolt... I think it only had 3 pins but the mechanism to turn the deadbolt required the 6pin key to reach the back of the lock. The very end of the key turned the actuator to unlock the bolt. Pretty simple yet unless you knew how it worked then regular lock pick tension wrenches didn't work. Luckily I happen to make all my own tools so one of my frequently used tensioner was one that reached the length of the keyway so I didn't only keep pressure on the front.. I figured out the mechanism while restoring the dead bolt afterwards. But if you weren't me or didn't know about it then you could sit there and pick those 3 pins all day and not know wtf was going on.

  • @khr1395
    @khr1395 3 года назад +401

    "I can't see why it doesn't work, it could be anything"
    As a software developer I felt that so much

    • @ethelredhardrede1838
      @ethelredhardrede1838 3 года назад +1

      STOP codes to isolate.

    • @codingvio7383
      @codingvio7383 3 года назад +2

      That is quite Relatable

    • @atoeprecious7522
      @atoeprecious7522 3 года назад

      There's no doubt in my mind that we are not only going bull, but BTCis going nuclear. A lot of people are wondering if now is a good time to buy because of where the price is at right now. I'd say it's outrightly wrong to just sit back hodl and wait maybe incur some losses along the line, that's a wrong mindset for an investor because as an investor finding ways to always increase and stack up more coins thereby making prof!ts should be the way of life, even experienced traders are in a doubt to take long or short position. I have been more skillful than lucky to be honest also thanks to Daniel wright who trained me as my initial investment was multiplied so much In two months. After getting in touch with Daniel wright an exp:ert in cryptography, who showed me how to use his program to make transactions and got 7 btc in 2 moths with him. if you are looking for a way to increase your portfolio or investment. Daniel TєIєɠramm; ( @danielwrightfx

    • @Spero_Hawk
      @Spero_Hawk 3 года назад +2

      I'm only learning C++ and thought the same thing. Also the fact that he ended up completely redoing a key component felt familiar.

    • @Just_A_Dude
      @Just_A_Dude 3 года назад +15

      99 bugs in the code to fix
      99 bugs in the code
      Hunt one down and patch it out
      137 bugs in the code to fix

  • @EmilBeckAagaard
    @EmilBeckAagaard 3 года назад +850

    This will be the most ambitious crossover !
    30 seconds in: “I feel a nice click on number two”

    • @lol-vq8dh
      @lol-vq8dh 3 года назад +11

      3 bends slightly

    • @mikfly
      @mikfly 3 года назад +15

      2 is binding

    • @hugoa.c.1566
      @hugoa.c.1566 3 года назад +10

      And it drops into a false set

    • @bass2564
      @bass2564 3 года назад +9

      No you won't, that's the entire point of the lock design.

    • @eukaryote0
      @eukaryote0 3 года назад +3

      You mean “a nice click on number two”?

  • @danielchoucinofigueiras1733
    @danielchoucinofigueiras1733 3 года назад +338

    LPL 30 seconds after receiving the locks: let me do that again so you know it is not a fluke

    • @mart-w
      @mart-w 3 года назад

      It's never a fluke.

    • @kryskrys6428
      @kryskrys6428 3 года назад

      He did it in 10 seconds

    • @lukeb1663
      @lukeb1663 3 года назад

      @@kryskrys6428 1 month*

  • @karsten69
    @karsten69 2 года назад +5

    1:37: Invests in really secure locks, but also human-sized windows... totally secure.

  • @sarahthegreat5543
    @sarahthegreat5543 3 года назад +685

    Fun fact: when Bosnian bill lets LPL come over he says “come in the doors locked”

    • @RobertFletcherOBE
      @RobertFletcherOBE 3 года назад +60

      by which point LPL is already in the building

    • @benedictus5657
      @benedictus5657 3 года назад

      @UC34m8SgyhEBpvesWi6WacSw dude what?

    • @sav22rem22
      @sav22rem22 3 года назад

      @@RobertFletcherOBE click out of 3

    • @hernandezthatsme3167
      @hernandezthatsme3167 3 года назад +3

      @@benedictus5657 he's saying that instead of saying"comein the doors open" or something LPL would be able to unlock the door regardless so it doesn't matter it the doors open or locked

    • @eviebr83
      @eviebr83 3 года назад +1

      This has a certain Chuck Norris quality to it and I would love that to be a thing!😍

  • @ChengTeoh
    @ChengTeoh 3 года назад +1647

    It'll be interesting to see what tool the Lock Picking Lawyer & Bosnianbill come up with to beat these locks.
    I'd love to see the behind the scenes from Lpl's point of view - his first impressions of the lock, the thought process on how to beat it, and finally the many attempts at making a tool that works.

    • @simo_2462
      @simo_2462 3 года назад +157

      and what if the lock has "an inexcusable design flaw that makes possibile to open it with * insert a really common object * "

    • @jonathanclark7444
      @jonathanclark7444 3 года назад +27

      @@simo_2462 red bull can

    • @tazogochitashvili6514
      @tazogochitashvili6514 3 года назад +6

      @@jonathanclark7444 A bloody fingernail

    • @justyourfriendlyneighborho2061
      @justyourfriendlyneighborho2061 3 года назад +21

      @@tazogochitashvili6514 A pringle crumb

    • @vintyprod
      @vintyprod 3 года назад +5

      @@justyourfriendlyneighborho2061 a dime and a nickel

  • @jdbb3gotskills
    @jdbb3gotskills 3 года назад +242

    That intro was gold. “This is the lock making engineer”

  • @Repligon
    @Repligon 2 года назад +3

    Maybe you can replace pink pins on 5:22 with multiple wafers so they can separate in two in any key bidding position: one set stays in lower cylinder, another stays with upper pins and keeps them from falling. Then you wouldn't need that complex pin holding mechanism.

  • @dinotawll6121
    @dinotawll6121 3 года назад +938

    Stuff : “I made this completely original, and complex lock, my only worry is that he might use a tool I have no idea existed”
    LPL : uses pocket knife

    • @coopkink
      @coopkink 3 года назад +36

      This cracked me up lol. I feel like a real door might have a smaller gap between the frame

    • @LavenderBluz
      @LavenderBluz 3 года назад +37

      @@coopkink they would, however a pocket knife could still fit, or even a credit card.

    • @sebastian110482
      @sebastian110482 3 года назад +12

      A strong magnet might be enough to move the bolt

    • @Deneberus
      @Deneberus 3 года назад +1

      @@coopkink or open from the inside

    • @ice2heart
      @ice2heart 3 года назад +3

      I surprised that is wasn't a lego piece

  • @neil_armweak
    @neil_armweak 3 года назад +705

    "When an unstoppable force meets an immovable object"

    • @cms_samuel
      @cms_samuel 3 года назад +13

      Unpickeable* object...

    • @Quagmire17000
      @Quagmire17000 3 года назад +26

      Love your username Neil 🤣

    • @Braiam
      @Braiam 3 года назад +7

      They pass through each other, without interacting.

    • @MrManniG
      @MrManniG 3 года назад +15

      LPL getting his 50cal ready...

    • @JamesBond-vd4gd
      @JamesBond-vd4gd 3 года назад +10

      The unstoppable force passes through the immovable object. The force is not stopped. The object is not moved. Case closed.

  • @HowIamDriving
    @HowIamDriving 3 года назад +961

    "Who are you? And how did you get in?"
    "I'm a locksmith....and I'm a locksmith."

  • @beartheperson
    @beartheperson 4 месяца назад +2

    The lock horror movie protagonists try to pick:

  • @valtea.
    @valtea. 3 года назад +206

    I wish I could've seen your reaction to him picked both locks

    • @PAEz...
      @PAEz... 3 года назад +2

      Ditto

    • @Chadok89
      @Chadok89 3 года назад +2

      In less than a minute

    • @AbirHasnat95
      @AbirHasnat95 3 года назад +3

      "Click out of 1. Little click on 2, Nothing on 3" made me just relaxed lol 😆

    • @Geoff_W
      @Geoff_W 3 года назад

      Right? Like that's the part I really wanted to see 🤣

  • @brailleskateboarding
    @brailleskateboarding 3 года назад +2090

    Love LPL, one of the best guests we have had, didn't get him on a skateboard though...

    • @randomperson7567
      @randomperson7567 3 года назад +62

      Hey, funny seeing you here.

    • @PyroSSBM
      @PyroSSBM 3 года назад +32

      The lock skateboard was hilarious

    • @wa2k360
      @wa2k360 3 года назад +29

      scientology

    • @star_quil
      @star_quil 3 года назад +4

      Y u watching this vid? Nvm 😆

    • @thatoneguy8424
      @thatoneguy8424 3 года назад +3

      as a wise person once said DO A KICK FLIP

  • @Nostalgianerd
    @Nostalgianerd 3 года назад +3039

    I'm now like the dog with the doorbell, but just waiting for the Lock Picking Lawyer notification sound.

    • @Scarlet_moon.
      @Scarlet_moon. 3 года назад +62

      you missed it he already put that video up a while ago.

    • @oXdeeiv
      @oXdeeiv 3 года назад +4

      @@Scarlet_moon. yup

    • @colinwoods8430
      @colinwoods8430 3 года назад +1

      @@Scarlet_moon. whats it called the video

    • @onetortle9114
      @onetortle9114 3 года назад +13

      ruclips.net/video/Ecy1FBdCRbQ/видео.html

    • @PianoHypnoshroom
      @PianoHypnoshroom 3 года назад +45

      when you want to act like a fan of lock picking lawyer but you epicly fail

  • @danhoward5686
    @danhoward5686 7 месяцев назад

    "Why does my dog bark when the doorbell rings" killed me. What a fun and inspirational channel. Glad I found it.

  • @pouyopouyo9817
    @pouyopouyo9817 3 года назад +1990

    When your lock is so unpickable you can't open it with a key

    • @DemeDemetre
      @DemeDemetre 3 года назад +5

      hahaha

    • @DemeDemetre
      @DemeDemetre 3 года назад +3

      @Duckyy_Duck quack

    • @Twisted_Code
      @Twisted_Code 3 года назад +27

      The lock has eaten the key

    • @midnut9036
      @midnut9036 3 года назад +2

      Just a piece of steel welded to two surfaces

    • @Twisted_Code
      @Twisted_Code 3 года назад +1

      @Orbital.Destination.Shock.Trooper OK I have to ask, what’s the subtext I’m not getting?

  • @rofl0bot
    @rofl0bot 3 года назад +2020

    Stuff made here: "I spent months making an unpickable lock"
    LPL: "little click on one, two is binding, annnnd we're in"

    • @ObservationofLimits
      @ObservationofLimits 3 года назад +105

      It was more like... "lemme just reach in here and bypass the pins".
      Achievement Unlocked: MasterLock Status

    • @krimhorn
      @krimhorn 3 года назад +6

      Always, never don't read that in his voice.

    • @lukeb1663
      @lukeb1663 3 года назад +12

      You forget the month of preparation and testing for picking the lock before the video was made but yeah that’s how lockpicking works

    • @bradclapp4022
      @bradclapp4022 3 года назад +4

      LPL: Ding Dong!

    • @colinross571
      @colinross571 3 года назад +5

      And let me pull out the pick that BosnianBill and I made

  • @badlydrawnturtle8484
    @badlydrawnturtle8484 3 года назад +784

    "accidentally designed with microscopic parts" Is such an engineer quote.

    • @Juhuuu
      @Juhuuu 3 года назад +25

      Happens to me all the time in CAD for 3D printing. An I'm not even an engineer. (Or maybe that's the reason itself)
      I'm happily designing away and next thing I know I'm looking up what's the smallest nozzle you can put on an FDM 3D printer, because the slicer decided to yeet out the absolutely mission critical 0,1 mm chamfer. *Surprise Pikachu face* you can't print a feature smaller than the nozzle diameter. God dammit.

    • @paidirajuuggina6758
      @paidirajuuggina6758 3 года назад

      @@Juhuuu feffgfd

    • @ngombosamuelmuvera4084
      @ngombosamuelmuvera4084 3 года назад

      ruclips.net/video/-RAglyw6ySk/видео.html

    • @JD2jr.
      @JD2jr. 3 года назад

      @@Juhuuu You actually can, in the right orientation. if the slope is in the z direction, each layer can be printed a small amount (whatever your steppers can make as the smallest movement) to the side.

  • @randominternetperson5806
    @randominternetperson5806 2 года назад +1

    Some says there's beauty in the mundane and this perfectly encapsulates it, making a lock is mundane and tedious but it's inexplicably beautiful

  • @KillerGamingBoss
    @KillerGamingBoss 3 года назад +416

    “I don’t think he could pick both”
    Click out of 1….

  • @EduardoPereira-bd7ub
    @EduardoPereira-bd7ub 3 года назад +516

    "This is unpickable"
    LPL: nothing on 1, 2 is biding, nice click on 3...

  • @guizmonium
    @guizmonium 3 года назад +246

    The first Premiere i'm excited about, ever.

  • @eternity_warriors
    @eternity_warriors Год назад +4

    0:40 This is LockPicking Lawyer, and by the time you hear dog barking - this two locks was already opened.

    • @mareksykora779
      @mareksykora779 2 месяца назад +1

      The second one was opened by cheating - making a small place between the lock and the surface of the wooden door. This last lock is perfect. No one, not even LPL, can open it unless it's on the surface of the door. When mounted submerged just three millimeters below the surface of the door, LPL has no chance of opening it.

  • @phlosen7854
    @phlosen7854 3 года назад +3409

    when your lock design looks like a combustion engine, you sucessfully overengineered your idea :)

    • @wonderwhatsnext5408
      @wonderwhatsnext5408 3 года назад +118

      Well, it's doubtful that a pickproof lock can be made in a simple way or it would have been done already.

    • @ariesleo7396
      @ariesleo7396 3 года назад +27

      Well, the lock picking lawyer still manage to pick it though

    • @Webrunner6951
      @Webrunner6951 3 года назад +14

      An edc pocket knife opened it. "Successfully overengineered"??? More like NO ENGINEER!

    • @mareksykora779
      @mareksykora779 3 года назад +36

      @@ariesleo7396 No, he wasn't able to pick it. He destroyed the wood of the door to get in from the back. He was not a picker, but a robber.

    • @ChildhoodHeadTrauma
      @ChildhoodHeadTrauma 3 года назад +5

      You speak the truth

  • @ZealotsACH
    @ZealotsACH 3 года назад +595

    “Two unpickable locks”
    LPL: “hold my beer” then proceeds to pick both locks before I can even hold his beer.

    • @MikeCOYS
      @MikeCOYS 3 года назад +43

      Stuff: Spends weeks on an unpickable lock.
      LPL: Unlocks it with a knife and mallet

    • @RashidTak
      @RashidTak 3 года назад +8

      Y'all think that was realtime of how fast LPL could figure out how to unlock this? Cute

    • @MikeCOYS
      @MikeCOYS 3 года назад +7

      @@RashidTak whoosh

    • @maxdrags3115
      @maxdrags3115 3 года назад +2

      @@MikeCOYS Weeks?
      No, months.

    • @Windraver
      @Windraver 3 года назад +3

      @@RashidTak did you watch LPL pick the lock?

  • @MisterJackTheAttack
    @MisterJackTheAttack 3 года назад +149

    11:00 "I'm worried there's some tool that I've never heard of that he's just gonna pull out of his bag and just unlock it."
    Turns out it was just a pocket knife.

  • @Oilburnerful
    @Oilburnerful 2 года назад +1

    As a fellow engineer, who has spent days staring at a computer trying to figure out why my design won't work. You sir are a mad genius. I bow to your greatness.

  • @mangenkyo
    @mangenkyo 3 года назад +635

    "Avengers Endgame is the most ambitious crossover event ever"
    Yeah, right.

  • @urmaker
    @urmaker 3 года назад +1958

    The fact TLPL's video is next in recommended, and is 10-minutes long, gives me hope! Will find out when I am done here.

    • @slightlysnaked3725
      @slightlysnaked3725 3 года назад +146

      Yeah it didn’t take long.

    • @traviszuluaga5672
      @traviszuluaga5672 3 года назад +70

      The disappointment was immeasurable

    • @shathaan1763
      @shathaan1763 3 года назад +159

      It's just explaining, he fucked the locks😭

    • @Marjannuel
      @Marjannuel 3 года назад +4

      Good luck 😎

    • @ryann7741
      @ryann7741 3 года назад +11

      @@traviszuluaga5672 and the day is ruined

  • @Xaqaria
    @Xaqaria 3 года назад +256

    Normally I roll my eyes at an incoming premiere. I'm actually looking forward to this one. I could see the two of you going back and forth to create a novel, manufacturable, and unpickable lock.

    • @Stellar-Cowboy
      @Stellar-Cowboy 3 года назад +8

      He posted a video a while ago where he showed a couple of locks he couldn’t pick

    • @TimCortesi
      @TimCortesi 3 года назад +12

      @@Stellar-Cowboy There are locks he hasn't learned how to pick, but they aren't unpickable. I believe the goal here is to create a lock which cannot be picked, regardless of skill and tools.

    • @omega1575
      @omega1575 3 года назад +18

      If I saw a lock marketed as “certified unpickable by Lockpicking lawyer” I would but multiple

    • @midn8588
      @midn8588 3 года назад +4

      I doubt these will be easily manufacturable. If you look at the mechanism in the first video, it's pretty impractical to produce on a large scale ans SMH says as much.

    • @SameBasicRiff
      @SameBasicRiff 3 года назад +8

      @@midn8588 Yet iterative design and innovation exist. I would not count it out even if unlikely.

  • @guido1534
    @guido1534 6 месяцев назад +7

    Its been 2 years. Where's the new lock?

    • @mareksykora779
      @mareksykora779 2 месяца назад

      This last lock is perfect. No one, not even LPL, can open it unless it's on the surface of the door. When mounted submerged just three millimeters below the surface of the door, LPL has no chance of opening it.

  • @Myers100684
    @Myers100684 3 года назад +847

    SMH: I'm worried he will have some custom tool I've never seen.
    LPL: watch me open this with a pocket knife.

    • @veery22
      @veery22 3 года назад +32

      That has to be the biggest , omg I can't believe I missed that, oversight.

    • @stephensthebomb
      @stephensthebomb 3 года назад +16

      Yeah! That said, if the lock was installed on the other side of the door (to open inward, like it would be in a front door situation) the bolt (and hinge pins) would have been obscured by the closing jamb which would make that simple pocket knife trick almost impossible from the outside.
      The other weaknesses would have still needed to be fixed up though...

    • @EliasMcCloud
      @EliasMcCloud 3 года назад +15

      At least it wasn't a lego character or a twig this time

    • @randolfbluedragon6777
      @randolfbluedragon6777 3 года назад +11

      @@stephensthebomb Could have used a magnet in that case, pretty sure he used a knife to be cheeky.

    • @th3l05t-f1z
      @th3l05t-f1z 3 года назад

      @@randolfbluedragon6777 how would you use a magnet?

  • @ulrikhardtschnnemann1769
    @ulrikhardtschnnemann1769 3 года назад +715

    LPL: well I have this tool Bosnianbill and I made…
    Stuff: shit there is a tool 😬

  • @AustenFerdinand
    @AustenFerdinand 3 года назад +773

    Finally , the video i've been waiting for

    • @tafsirnahian669
      @tafsirnahian669 3 года назад +1

      Yeah, for five months lol

    • @user-nil
      @user-nil 3 года назад +1

      for almost 3 months

    • @Wee_Vixen
      @Wee_Vixen 3 года назад

      It was picked both

    • @googleuser298
      @googleuser298 3 года назад

      We waited and it was picked in no time and easier than other locks LPL has done.

  • @Iceking007
    @Iceking007 6 месяцев назад

    I have done this type of engineering & design before, and it is BY FAR my favorite. If I could get a job where I got paid to do this all the time, that would be heaven! 😍 Like solving mini puzzles all day long.

  • @denys-p
    @denys-p 3 года назад +318

    LPL: Finally, a worthy opponent! Our fight will be legendary!

    • @le0p4rd98
      @le0p4rd98 3 года назад +20

      And done. It only took me 2 minutes. Which is impressive but I could think that on real scenarios a thief would just bust it out

    • @SuperUltimateLP
      @SuperUltimateLP 3 года назад +1

      i mean to my knowledge he never got by the "bowly" either

    • @laurensjvg
      @laurensjvg 3 года назад +2

      There are several locks he can't pick he just doesn't make a video about them

    • @guy2574
      @guy2574 3 года назад

      You’re very unfunny

    • @myhamsterflewaway55
      @myhamsterflewaway55 3 года назад

      Yes

  • @NiftyShifty1
    @NiftyShifty1 3 года назад +494

    “Today on Lock Picking Lawyer, we test how to open a lock using a 50 cal”

    • @13deadghosts
      @13deadghosts 3 года назад +31

      There was a episode where LPL and BB shot some locks, was fun :D

    • @MissYijare
      @MissYijare 3 года назад +6

      LPL opened it without even trying

    • @Sabeteur83
      @Sabeteur83 3 года назад +8

      I think this method is more of a demolition ranch one lol.

    • @patrickd9551
      @patrickd9551 3 года назад +2

      @@Sabeteur83 you just beat me to this comment :D

    • @gemhunter498
      @gemhunter498 3 года назад +2

      No, you're thinking of Demolition Ranch XD

  • @hugepps8327
    @hugepps8327 3 года назад +421

    “He’s probably gonna pull out some weird tool”
    Pocket knife: let me introduce myself

    • @hse6144
      @hse6144 3 года назад +1

      Ramset!

    • @devillonesome8648
      @devillonesome8648 3 года назад +2

      Lucky he didnt pull out the redbull.

    • @jasonkim5288
      @jasonkim5288 3 года назад

      @@devillonesome8648 you forget his ultimate picking tool, the tree branch.

  • @Bukrger
    @Bukrger 2 года назад +1

    My brain: “Is that like an in line five Camaro engine or something?”

  • @potatolord2858
    @potatolord2858 3 года назад +234

    Everyone: "Oh, the pins slide, how can he even test th..."
    LPL: "3 is binding..."

    • @randombrownguy1519
      @randombrownguy1519 3 года назад

      I don't think you understand how that works

    • @poppaganja3793
      @poppaganja3793 3 года назад +4

      @Soller ruclips.net/video/EWTtBhgGnSA/видео.html

    • @YourMJK
      @YourMJK 3 года назад +5

      You were right!

    • @victorsupreme214
      @victorsupreme214 3 года назад +5

      My God you are psychic

    • @sav22rem22
      @sav22rem22 3 года назад +1

      @@randombrownguy1519 Well it happened

  • @BigDaddyWes
    @BigDaddyWes 3 года назад +526

    "The way to pick a lock is to solve it one pin at a time."
    LPL: "You underestimate my power."

    • @ngombosamuelmuvera4084
      @ngombosamuelmuvera4084 3 года назад +1

      ruclips.net/video/-RAglyw6ySk/видео.html

    • @Dudndbdjdn
      @Dudndbdjdn 3 года назад +2

      He can just use an electric lock pick

    • @Wolfis-en1ut
      @Wolfis-en1ut 3 года назад +1

      @LoupeShot if you're going destructive, just use the window...

    • @MildMisanthropeMaybeMassive
      @MildMisanthropeMaybeMassive 3 года назад

      It’s over! I have the high ground!

    • @angrygreek1985
      @angrygreek1985 3 года назад +1

      I love how LPL got through both these locks with almost no problem whatsoever

  • @CrudelisSpurius
    @CrudelisSpurius 3 года назад +526

    "I'm worried there's going to be some kind of tool that I've never heard of that he's going to pull out of his bag to unlock it" **Pulls out a hammer and pocket knife**

    • @mattlau04
      @mattlau04 3 года назад +15

      Even worst, **pulls out the lock bosnian bill and him made**

  • @Flyingwalrus42
    @Flyingwalrus42 2 года назад +1

    Why does my dog bark when the door bell rings

  • @shoumikahmed6373
    @shoumikahmed6373 3 года назад +436

    SMH:“I have a totally new design which is even more better."
    LPL: Just turn it 45 degree and it's done....

    • @dpatts
      @dpatts 3 года назад +27

      Spoiler ahead
      So there were two exploits on the newer lock: the thin piece of metal tensioning the upper core, making it pickable (now fixed with a back-cover) and the 45 degree anti-retraction mechanism being walkable with a pointy knife (which is fixed by decreasing the angle of the fin). With these two exploits addressed, how would LPL get around a new design?

    • @CrudelisSpurius
      @CrudelisSpurius 3 года назад +21

      @@dpatts As LPL says, "There's not a lock I can't pick, but there are locks I can't pick yet"

    • @DEV-rw7eu
      @DEV-rw7eu 3 года назад +2

      @@CrudelisSpurius "YET"

    • @supermerill
      @supermerill 3 года назад

      @@dpatts > how would LPL get around a new design? => he also talks about third method.

    • @ac0rpbg
      @ac0rpbg 3 года назад +1

      @@supermerill third method was decoding the pins and making a key, the upper pins were the same length so it is pretty easy to decode.

  • @rafaelpezvela
    @rafaelpezvela 3 года назад +330

    The time has finally come

  • @Max_Marz
    @Max_Marz 3 года назад +395

    "I'm just gonna skip the part where I stare at the computer for a couple days"
    I'm gonna try telling my boss that.

    • @lambdaman3228
      @lambdaman3228 3 года назад +1

      Your boss will thank you. You still look at the screen, you just don't share that part with the world.

    • @Johnrich395
      @Johnrich395 3 года назад

      So, when is your job opening up? Asking for a friend!

    • @Max_Marz
      @Max_Marz 3 года назад

      @@Johnrich395 They're always hiring.

  • @MangyMagi
    @MangyMagi Год назад +1

    Imagine if you sent LPL locks with the mechanism visible like with your other test designs, the confidence in the lock would be unreal.

  • @sohamray908
    @sohamray908 3 года назад +345

    I felt that “accidentally designed microscopic parts” thing so hard

    • @abelthomas1516
      @abelthomas1516 3 года назад +1

      And if you try to avoid them instead of removing them, it's gonna take eons to finish your project😗😂

    • @AR-qo4zz
      @AR-qo4zz 3 года назад

      Nice profile picture. Had me tripping for a second lol

    • @sohamray908
      @sohamray908 3 года назад

      @@AR-qo4zz lol yeah it’s good one 😂

    • @nullinterface2077
      @nullinterface2077 3 года назад +1

      Been there in a previous career, although it was less "microscopic parts" and more "mistakenly applying sheet metal design scale to a sewn item, baffling the hell out of everyone asked to provide a quote"

  • @GennPen
    @GennPen 3 года назад +123

    - This locks Unpickable!
    LPL: I'll try waverake.

    • @MrAtlantis098
      @MrAtlantis098 3 года назад +1

      Hahahaha!... Or... Unpickable lock picked with a soda can

    • @ChakaHamilton
      @ChakaHamilton 3 года назад +1

      I bet he breaks out the pocket EMP again.

    • @iantaakalla8180
      @iantaakalla8180 3 года назад +1

      It turns out a pocket knife and the ability to walk back the bolt is good enough, though it took a long time to figure out.
      Although if he left the lock as is when he tried the lock for the first time alongside the other two locks, that would probably truly be unpickable because of internal problems.

  • @MDSF90
    @MDSF90 2 года назад +1

    The daaaaawg!
    Teh doooooog!!
    Deh dooooooge!!!
    _doorbell_
    *Deg:* _”BORK HARF YARK HORK BORF YORP!”_

  • @LuxiBelle
    @LuxiBelle 3 года назад +350

    10:21 "We're just going to ignore this"
    LPL: I didn't.

    • @davidcovington901
      @davidcovington901 3 года назад +11

      You called it!

    • @Jumpsterr
      @Jumpsterr 3 года назад +9

      Sauce of your profile pic?
      I'm asking for a friend..

    • @Geoff_W
      @Geoff_W 3 года назад +8

      @@davidcovington901 I think he actually went through the other side, not the part with the gap.

    • @detenator1
      @detenator1 3 года назад +4

      @@Geoff_W Yeah, there wouldn't have been any damage to the door like LPL showed if he utilized that space.

    • @qwedge
      @qwedge 3 года назад +2

      @@Jumpsterr reverse image search

  • @autorajahsr
    @autorajahsr 3 года назад +102

    We need to appreciate that he is not a professional lock designer and yet created "quite good" lock for LPL.

  • @eddiepierce7028
    @eddiepierce7028 3 года назад +3039

    I’ve been a locksmith and in the door hardware business for 30+ years. Thieves don’t pick locks. They bust down doors and go through windows. A decent deadbolt is 10 times more valuable than a cylinder you can’t pick.

    • @jimjohnson394
      @jimjohnson394 3 года назад +472

      One time I was working shift work at this factory, when we get off the shift we all go to our cars and all the windows of the cars are busted out and valuables stolen, probably 20 cars or so. I normally don't lock the doors so I thought I would be fine. Nope, they didn't even bother lifting the handle. They just busted the window and stole my cassette tapes.

    • @themc3311
      @themc3311 3 года назад +65

      @@TruCloudGaming Jimmy a deadbolt with a credit card? Either you don't know what a deadbolt is, or it was very poorly installed.

    • @TruCloudGaming
      @TruCloudGaming 3 года назад +40

      @@themc3311 Yes upon further inspection the deadbolt in question is a bit fucked. Sorry I didn't come back to correct my comment.

    • @woswasdenni1914
      @woswasdenni1914 3 года назад +120

      thats the thieves you know about because they been busting doors. those who picked locks never even got reported and victims thought they somehow lost a couple valuables

    • @RaveyDavey
      @RaveyDavey 3 года назад +54

      @@woswasdenni1914 Meh....very, very, very rare. There's just no point. Nobody wants to be at a door, maybe lit up by a security light, focussing all their attention on a lock that may or may not be pickable by that person. Not when you can just use a crowbar to open a window or similar.....or just go to another property with worse security.

  • @velcroman11
    @velcroman11 Год назад +9

    Your lock are a hoot! BUT, you mounted the locks on the “back side” of the door. Front/back door open inwards. This negates the need to weld the hinge pins. The second lock can be opened with a slid tool to hold/jam the internals. This can be resolved cheaply with a bush ring that the lock actually mounts into. Now the lock sits into the bush preventing a slide tool slipping up the rear of the lock. I am gob smacked, your second lock is brilliant. The mounting of the lock was the problem. 👍👍

  • @RandallStephens397
    @RandallStephens397 3 года назад +141

    Based on the design (at least for the first lock where we got to see it), I feel like if there's any weakness in it that LPL can exploit to defeat it, it'll be from the machining process and only because Stuff Guy isn't a career lock maker.

    • @crash.override
      @crash.override 3 года назад +52

      "As you can see, the lock body melted at a mere 275 degrees. The materials choice here was amateurish, as would be expected. I look forward to an improved version using Boron-Steel alloy."

    • @fredriddles1763
      @fredriddles1763 3 года назад +17

      I feel like the fact this was made with precision tools and craftsmanship as opposed to coming off a factory line will make it much harder to find a exploit.

    • @Geoff_W
      @Geoff_W 3 года назад +18

      @@fredriddles1763 generally, the better the craftsmanship, the harder it is to pick. Picking exploits a lack of precision in the pins. That said, LPL is a cleaver trickster, and he may find some other way to bypass it.

    • @skrimper
      @skrimper 3 года назад +13

      I bet it will be tolerances that he exploits

    • @sinisterthoughts2896
      @sinisterthoughts2896 3 года назад +9

      @@fredriddles1763 lock parts in a factory are still made on precision tools. It would just require a good machinist a lot of time to make a very tight lock.

  • @safetyinnumbers9587
    @safetyinnumbers9587 3 года назад +255

    That must be the Internet's most awaited crossover since Avengers.

    • @Raul-ef2ie
      @Raul-ef2ie 3 года назад

      Oh you should check Mark Robert with Jim Browning collab

  • @royvicente93
    @royvicente93 3 года назад +198

    It's all fun and games until LPL whips out a magnet.

    • @GoldAk47
      @GoldAk47 3 года назад +2

      Winner winner

  • @JudeCoyne
    @JudeCoyne 2 года назад

    That perfect timing and harmony matching at 10:08, amazing

  • @cheesedabber
    @cheesedabber 3 года назад +103

    is everyone going to ignore that he has an article open at 8:04 "Why does my dog bark when the doorbell rings"

    • @alanmf3806
      @alanmf3806 3 года назад +6

      OMG, Thanks! The comments sections does make the videos so much better

    • @Drazooma
      @Drazooma 3 года назад +3

      Nice Catch!!! Lol

    • @bmansk8520
      @bmansk8520 3 года назад +8

      There are lots of joke tabs open throughout

    • @meeeeee423
      @meeeeee423 3 года назад +5

      3rd monitor is always fun

  • @yaykruser
    @yaykruser 3 года назад +430

    LPL Title be like: 2 Locks picked on 1minutes using just thin air .

    • @BlessedByAlMighty
      @BlessedByAlMighty 3 года назад +2

      he is a joker, long time ago was sent to him , but he couldn't pick it up.months ago, otherwise you are going to see his video about it.

    • @MuitaMerdaAoVivo
      @MuitaMerdaAoVivo 3 года назад +9

      @@BlessedByAlMighty Na mate, he sent the locks like 3 weeks ago. He posted on his subreddit.

    • @ehsan_kia
      @ehsan_kia 3 года назад +7

      @@BlessedByAlMighty He didn't actually send the locks, he was going to but kept working on it and improving it, hence how he's now sending TWO locks, not one.

    • @jjpark98
      @jjpark98 3 года назад +3

      I'm going to take a guess that he'll simply wack the lock against the table or something and it'll open.

    • @t3hd0n
      @t3hd0n 3 года назад

      @@MuitaMerdaAoVivo he doesn't appear to be active in r/LockPickingLawyer at all and u/LockPickingLawyer hasn't posted anything in a month

  • @RamadaArtist
    @RamadaArtist 3 года назад +266

    When all you have is a CNC machine, everything looks like a custom-made part.

    • @JasonBaldwin301
      @JasonBaldwin301 3 года назад +7

      or a 3d printer

    • @RamadaArtist
      @RamadaArtist 3 года назад +4

      @@JasonBaldwin301 word.

    • @feedbackzaloop
      @feedbackzaloop 3 года назад +1

      but you can make mass-production molds and dies with it so that your part will look accordingly

    • @drunknomore1
      @drunknomore1 3 года назад +1

      All I have is a hammer, so you might imagine my solution. Fantastic play on that age old saying!

    • @JasonBaldwin301
      @JasonBaldwin301 3 года назад

      Did I miss a reference?

  • @xtramail4909
    @xtramail4909 2 года назад

    Revealing the door, all the questions, and the dog bark was perfect