Finally someone cleans the cars off BEFORE snowblowing! Cleanup on aisle around the cars!!! Most vids I see are the opposite. I see you have your shoes set down so as not to pick up stones and break a shear bolt. Good video.
@@leesmith9942 unfortunately when buying a tractor it’s not like they say take it for a few hours and then decide. I think the cab makes that noise worse that the open station model.
Sweet video just ordered the same set up for my 3310.. I did get the hydraulic with electric deflector tho as you wish you bought lol.. expensive about 1000 bucks more.. but worth it since you don't have to get outta the cab..
Just came accross your channel. You have a beautiful location! I too live near Glens Falls and have the same exact tractor. Hard to beat the cab on these cold winter days!
A rear blade is the perfect compliment to the front blower. Let the blade do most of the work and wear and tear, then finish it off with the blower. Thanks for the video
Very nice we traded a B 2650 there is a difference with the LX 2610 glad we did it. The blower is interesting we use 72 inch front blade and 72 inch back blade with a spreader when needed.
Have you gotten any deeper snow than that since this video?? Because if not you are rather fortunate that's all you get... Makes for a easy winter. Looks to be maybe 5 6 inches
@@MtTopLiving they can handle a lot those lx2610..... Our last storm around Christmas got about 30 inches.... My lx2610 with three points snowblower not a problem
@@thegreatnorthwoodswithbb2863 Some mornings I just have to make a hole to get to work so I don’t always have time to film it. I’m very happy with it’s performance so far.
Looks like you have the 3rd function for the loader, wouldn't take much to hook up a hydraulic chute deflector! Your place is beautiful, & I love the fireplace!
@@Malpeque_Bay_LX3310 Hopefully it’s not a long wait. I actually could have got the 3310 same day, I just chose the 2610 based on my research and what I thought would work best for me. Time will tell...
@@MtTopLiving I did the same. Bought my LX2610 in June 2020 with MMM but that didn't work out so I went with a 84" rear finish mower and need the extra hp. I'm sure it will also make a difference with my blower.
@@Malpeque_Bay_LX3310 That’s unfortunate, I hope the 33 works out. In my case I new a mower would never be attached, my terrain is meant for mountain goats. I may find it’s not sufficient for a log winch but I will deal with that then.
![Quando Rondo - Grow Up [Official Music Video]](http://i.ytimg.com/vi/8zFnCg3BO4Q/mqdefault.jpg)
Finally someone cleans the cars off BEFORE snowblowing! Cleanup on aisle around the cars!!! Most vids I see are the opposite. I see you have your shoes set down so as not to pick up stones and break a shear bolt.
Good video.
I never understood why they don’t start with the cars. Yes I had to adjust the shoes, I actually had a video asking for advice and I gave it a try.
I'm waiting to see the deep snow
very nice looking machine. i would love to have this myself
I think Kubota hands down make some the best front blower solutions. Nice piece of property there btw.
Man those kabota 2610's sure have a loud wine to them.
Yes yes they do!
@@MtTopLivingwas watching another video I think was gp and he said compared to his old 2601 it's a big difference in the loud wine
@@leesmith9942 unfortunately when buying a tractor it’s not like they say take it for a few hours and then decide. I think the cab makes that noise worse that the open station model.
@@MtTopLiving I hear ya.
Nice job!
Sweet video just ordered the same set up for my 3310.. I did get the hydraulic with electric deflector tho as you wish you bought lol.. expensive about 1000 bucks more.. but worth it since you don't have to get outta the cab..
I may look into adding it to the third function, way overkill but a lot less $$$.
Just came accross your channel. You have a beautiful location! I too live near Glens Falls and have the same exact tractor. Hard to beat the cab on these cold winter days!
The A/C is pretty nice this summer also. I noticed you stopped at Fred the butcher, love that place.
@@MtTopLiving the ac has been a god send during these heat waves. Heck yes freds rules!
A rear blade is the perfect compliment to the front blower. Let the blade do most of the work and wear and tear, then finish it off with the blower. Thanks for the video
What's your skids shoes set at? All the way up.. I have a stone driveway also..
When they were all the way up it caught rocks. I dropped them about half an inch and that solved the issue.
Very nice we traded a B 2650 there is a difference with the LX 2610 glad we did it. The blower is interesting
we use 72 inch front blade and 72 inch back blade with a spreader when needed.
I like the blower for when the snow piles up, there is always somewhere to put it which becomes a problem when plowing here.
Have you gotten any deeper snow than that since this video?? Because if not you are rather fortunate that's all you get... Makes for a easy winter. Looks to be maybe 5 6 inches
Our last storm dropped 2 feet so I’ve been putting it through it’s paces.
@@MtTopLiving they can handle a lot those lx2610..... Our last storm around Christmas got about 30 inches.... My lx2610 with three points snowblower not a problem
@@thegreatnorthwoodswithbb2863 Some mornings I just have to make a hole to get to work so I don’t always have time to film it. I’m very happy with it’s performance so far.
Looks like you have the 3rd function for the loader, wouldn't take much to hook up a hydraulic chute deflector!
Your place is beautiful, & I love the fireplace!
Yes I have a 3rd function and would like to do just that for next season. Thanks for your kind comments.
Nice setup you have with the front blower. Do you have the larger R4 tires?
They are 15x19.5. Not really sure what standard is. When I purchased it I said get me what you can and still waited 5 months.
@@MtTopLiving those are the larger size. Waiting on the same size but R14's and a loader for my crated lx3310.
@@Malpeque_Bay_LX3310 Hopefully it’s not a long wait. I actually could have got the 3310 same day, I just chose the 2610 based on my research and what I thought would work best for me. Time will tell...
@@MtTopLiving I did the same. Bought my LX2610 in June 2020 with MMM but that didn't work out so I went with a 84" rear finish mower and need the extra hp. I'm sure it will also make a difference with my blower.
@@Malpeque_Bay_LX3310 That’s unfortunate, I hope the 33 works out. In my case I new a mower would never be attached, my terrain is meant for mountain goats. I may find it’s not sufficient for a log winch but I will deal with that then.
Just found your channel. I have the b2650, the LX predecessor. Such a nice tractor especially for snow removal. Nice video, now a subscriber. 👍
Good video, ditch the music at the beginning.
how much did the front blower cost?
$5400
@@MtTopLiving good price. I got quoted around 9k
@@simd510 just keep shopping, every dealer sets there own prices. It’s worth driving a few hours to save the money.