RYDR 6 AND RYDR 9 BIPODS 4K

www.rydrindust...
THE RYDR-9
The perfect balance of weight, cost and functionality, The RYDR SIX-6 is packed with features you could expect from the most expensive bipods on the market.
The RYDR-9 bipod, features our quick leg lock system. ¼ turn of the leg will release the first leg section another ¼ turn will extend the second leg section. legs can be adjusted to any height by turning each leg section separately to achieve any desired height ranging from 5” in the bipods lowest position to 20” in the bipods highest position.
*Big rubber feet on the bottom of the carbon fiber allow for easy grip with gloves on, Also allowing for a wide range of bipod angles in different types of terrain.
*3 position pivot point, The first position of the bipod locks the bipod in its stored position against the firearm. second position allows the bipod to deploy at a 45 degree angle in reference to the firearm. With the final 3rd position this position locks the bipod in a 90 degree position in reference to the firearm.
*Leg adjustment, There are two leg adjustments when the bipod is deployed. The first position bipod rests in the pivot point grooves using the weight of the firearm to lock into position, second leg adjustment allows legs to be spread to the widest position.
*Friction based tilt, This knob located on the bottom of the bipod head, allows the user to get gun level in reference to bipod, this model has a knurled cut away knob to get better grip and get tilt feature tighter than in our previous model.
*Panning head. Our panning head allows user to pivot firearm 360 degrees around the bipod while keeping bipod feet stationary. This feature is best used on follow up shots, instead of having to rebuild a position after the target has moved you can unlock the pan knob and pivot bipod without having to rebuild your shooting position.
RYDR-9 SPECS
*Weight 22 oz
*Height 6.5” in bipods lowest position and 28” in bipods tallest position.
*Attaches to 5 slot picatinny rail ( rails shorter than 5 slot pic rail bipod may not fit ) pic rails 5 slots or more are recommended.
DO NOT SKIP THIS STEP
We include medium strength Vibra-Tite with each bipod. Attach bipod to gun, deploy leg sections and adjust each leg to desired tension (bolts that attach legs to main pivot point) along with main pivot screws. Take note of desired working tension of both legs and main pivot point using a torque wrench. Take bolts out 1 by one and apply the provided Vibra-Tite to a total of 6 bolts, 4 leg bolts and 2 main pivot bolts. Using a torque wrench set leg and main pivot tensions to desired tensions. ( all bipods are set with the legs at 25” pounds and the main pivot point at 30” pounds) If this step is skipped you may run the risk of loosing hardware overtime.