Superb comparison and I doubt people realize the time it takes to video, test and analyze all of these results. I can only give one thumb up, but two thumbs up are deserved!
Thank you, man. I appreciate that. And, you are definitely right... I don't think many understand the legwork that goes in to testing and analyzing the data before I even begin thinking about the video to present the results. It takes more than a full working day to complete one test.
You don’t listen to data. You listen to the sound. And that’s very subjective. Hats off to this guy for a great review but just wanted to clarify on what you said.
I just want to hear a couple of songs each. I don't care about paper numbers. Real-world dynamic sound. I don't want some to tell me what they think it will sound like
I bought my Polk back in 2008 as an open box at best buy for about $170 and have loved it the entire time. I have recently paired it with a set of Klipsch quintet satellite system on a Yamaha receiver and it sounds amazing...
@@Max-df5zp I got scar SDR 600 W RMS 10” build a box buy $100 power supply or whatever supplies the right amount of amps for an amplifier I bought a 100 amp and I bought the 800 w rms scar amplifier. Or Buy the whole sub kit for 300- $400 and all you gotta do is buy the power supply takes a lot of knowledge, but it works a lot better
I can dig it! Always interested in seeing budget equipment put head to head by an independent reviewer. This was a ton of work I hope people appreciate what you’re doing here.
Erin's Audio Corner thanks! You’re doing the lords work here so the least I could do was drop a comment and share this video because a lot of people looking for a HT sub are definitely looking at these under $200 models.
I purchased my Polk PSW10 from a local auction for $40 and hooked it up to my living room system and love it. Even at full retail price it's an excellent performer!
Just started building my “newbie” vinyl player stereo set-up. Being on a budget and with limited space, this video was immensely helpful and insightful for me. Thank you for all the time and effort you put into this. You just earned a new subscriber 👍
man the effert you put into making this, going into all the granularities relevant to each unit using real data analysis, this is dedication. This gets a sub from me pun intended!
This review and testing looks sound, great job on the level of detail. The only challenge here is the room factor with placement of ports. I have the Polk PSW10 and the Klipsch R-10SW and the Klipsch is noticeably louder in the large living room. It didn't even come close. Part of that had to do with how the port interacts with the rear wall. I'm not an expert in subwoofer placement, but it's worth a note. My Polk sub seems to "hit" a little harder, but the rear port on the Klipsch energizes the room more for deep rumbles/long bass notes. Nice job!
We had a Polk PSW125. It was never abused or overdriven. After 2 years, it started to make a heartbeat sound. The amp failed. A new amp was sent and 3 years later, the same thing happened again. There were forums all over the web about this issue with PoIk subs. I wouldn't own another Polk sub if it were given to me free of charge. We moved up to an SVS sub. It was more money, but it's worth every penny. Much better construction, much more power, a much better warranty and most important of all, much deeper and more powerful bass.
You’re the man. I’m leaving this comment 1 second in because you’re the first video on these Amazon subs by someone who’s actually seen, used and touched the products they’re talking about in person instead of just reading off reviews or guessing if it’s good or not because of the brand.
i got my whole system for under $200. Yamaha receiver for $60 used Monoprice home-theater- in-a-box for $100. Just watched Hook with the reciever settings perfect and was thoroughly impressed. My dad won't let me use his klipsch kg3's but I've heard them before so i know my system is pretty decent for what I paid.
I just bought a Polk PSW12 sub to use with Sony DH196 receiver and I couldn't be more happier. The quality and the sound of the Polk sub is outstanding considering I paid $139. I highly recommend it.
Not really, he shows the subs then goes to a website where you can also read it yourself in under 20 minutes, and the audio is echoing back when he does the screen recording.
@@parkeranderson7155 $$$$ and look at the subs he examines, all the low end ones have some fatal flaw, then there's an these $500+ subs, why? Freebies? Sales cash or just bad judgement? Why no Daytons? I mean, that's weird. No klipsch, no Jamo?
Erin, fantastic job at presenting the variables and results from your testing! Really clarifies what each subwoofer is good at and more importantly, helps you decide which unit to purchase on based what you are looking for in your subwoofer! Thanks again!
I have a Polk psw10 for my outdoor systems. I figured for the price ($99 if you keep an eye out) I could swap out every couple of years. I keep them covered and the first one has been in use for about 3 years, the other for over 2 years in a salt environment.
I had the polk previously it just died one day after 3 months so i decided to give the klipsch a try and loved it to my ears it was more accurate to the original music with a more lively sound i will say the elac is interesting im running dayton audio 6.5 air bookshelfs with matching center channel and 4 inch air rear fills so not a klipsch fanboy overall great review thank you for your hard work
I was recently gifted a nice home theater system. Your easy to follow explanations, insights, testing, and commitment to help newbies like me earned you a subscriber for sure. Will be using your affiliate link this week to select the subwoofer that matches my needs. Bravo!🙂
Thank you for the great data as always. I'm currently neck deep in learning DIY home audio, and while you usually get better bang per buck by building yourself I can't see a DIY sub beating the Elac/Polk for the money, really astounding value.
I just built a DIY sub using SB Acoustics 8 inch SB23MFCL45-4 ported, and to be honest I should've went with the ELAC instead. DIY isn't always a great value.
Exactly the review I was looking for, with the subs I was looking at. Thank you! I'm going to go for the Elac. Aside from performance, size and aesthetics are also factors I was considering. So I'm glad you took into account these various characteristics.
I almost pulled the trigger on the Yamaha sub until I saw this video! Based on your findings (and my budget) I just purchased the Elac sub. THANKS for doing this great comparison video!!
Love that shirt! I was a kid in the 80s and the image on your shirt was first released as a poster. All my friends had it and we cranked up our stereos while wearing sunglasses 😎
Thanks for posting this-great review! I have a Cambridge Soundworks PSW1 from the 90s that is still going strong, but looking to upgrade to something more "wife-approved" in the living room.
Through trial and error I've found that I needed a minimum of 200rms to drive an adequate sub. Also well worth the time to save enough to double+ your budget on subwoofer(s). Good vid, informative
Thank you for taking the time in reviewing so many subwoofers. I have made a selection upon your reviews and I am loving what I have invested in keep on rocking man
I've got a pair of Dayton Audio 12" powered subs. I searched coupons and one was an open box deal. I got the pair for about $233 shipped. I am very happy with the performance for the dollar. I don't have any particular bass management on my amp and am using the high level inputs. My room is a little wonky and they do a good job producing fairly solid bass at the listening position. I'm sure they can't compete with the high dollar subs out there, but the important thing is, they are good enough to enjoy and not a waster of the money I did spend. I don't plan to try to upgrade out of them until after doing something like a MiniDSP with a proper power amp and a calibrated mic for room/system correction.
The Dayton Audio SUB-1200 is the best sub under $150 new that you can buy. I don't think you will get any closer to that true deep theater rumble than the Dayton Audio for that price range (unless you get a steal on a used sub).
I’m a psw 10 guy. And I came to the logical conclusion like last Thursday of using one of the two subs in my room to represent lower frequencies than the other. If placed properly it’s a thing of beauty when low sound seems to come from an invisible source. And when you mentioned specializing two different models for two different jobs it made me proud to be a wanna be audiophile. New subscriber.
About 2 yrs ago i bought the wireless version of the klipsch sub to use it in the master bedroom "set up". Got it for $150 during Thanksgiving week deals on Amazon. For the price it pumps out some nice punchy bass but i have it set up so we can feel the bass more than hear it, it was able to fit on a corner next to our bed so it gives a nice "feel" effect during action scenes when watching late at night even at low volumes. Ive always wanted to give the polk a try due to its price but the higher watts rms and wireless ability of the klipsch and not to mention its iconic "cera-metallic" cone got my money.
Just ordered the Elac for the bedroom surround system, paired with the Jamo 803 mains, 801 surround and S81 center for a whopping grand total of about 375.00, complementing an LG Oled 55”. Thanks for the hard work doing the review! I may add the second Elac, depends how everything sounds when it arrives. Using an older Sony STRDN1050 for processing/amplification.
Thank you. This video has been a GREAT help. Helping a friend put together a HT system and I had no clue on what budget subwoofers to even look at. Video was simple and to the point which made it much easier to make a selection. My buddy is getting an Elac. Your channel is a hidden gem. You should have far more subscribers.
Thanks alot......I'm so glad I found this video. I just purchased Elac speakers and knowing I can have matching sub speakers makes me excited. A big thumbs up.
Yea i like polk. The Andrew jones designed Pioneer are outstanding to for the price. Polk has better sub pioneer tower speakers are better. I have 2 tower speakers and the middle piece Pioneer than 2 polk rear surround. I have a acoustic 12 500 watt sub. That thing drills but its a little more expensive. Thats my living room. Then in my bedroom its all polk same setup just all polk with 1 10" polk sub. There awesome for the price.
I have a budget system a klipch subwoofer Im a audio person at my age I would not spend to much more for a just bass now if I had high end money then I would spend it but I don't my sub is good enough.
Got my Polk psw10 about 3 years ago because it was the cheapest and had good reviews on amazon. Boy was I happy with it and now this verifies my happiness.
Me, too. But there’s only so much $$$ I can spend at a time. I paid for all these myself. I hope to test those in the next round, though. This isn’t a one and done. 👍
@@konior21 I'm skiddish on that. I have heard of people abusing the return policy and then being barred from making returns and left holding a lot of stuff they couldn't send back. But, hey... if you wanna buy some, send them to me for testing and then have me return them then... ;) :D
I've got the Polk partnered up with a pair of retired JBL 15" carpeted DJ speakers powered by a $25 Lepai amp and wow, what a set up. Sure the JBLs could handle more power, but the Lepai keeps things under control and the Polk keeps up perfect. I am amazed at the bass that thing can put out. Like they say, my neighbors listen to good music whether they like it or not :-). Great video, thanks for the time and effort!
I notice at 25hz and above the Klipsch outperformed the others. It's rated to 32hz +/-3db. Pretty amazing for a 10" budget sub. I had and sent back the Polk because of port, chuffing noise. The Klipsch is simply superb for musicality and tight bass well below 30hz, if not to 20hz.
I am gettin the Klipsch, but in most recent datasheet he upgraded datas and looks like klipsch not so good. Do you suggest to go on and buying it? I saw that it should go near 20hz with a good result
Thank you so much for your detailed, clear video! I have always wondered what the differences were and which to choose, you have just made my choice clear. Thanks again! Keep up the great work
My PC system is a 2.1 set up with a Topping TP-60 Matrix Mini DAC Polk Audio PSW108 Polk Audio T-15 Bookshelf speakers. Super budget speaker setup and sounds awesome. Been using it for about 4-5 years now.
I bought the Polk Audio one after seeing this and it saved me $150-200. Perfect amount of punch for my surround and Like the forward facing air port was nice for placement by wall.
Great testing! It cemented the polk in my mind. psw505 12" is what I'm looking at. I was thinking about Klipsch but after I seen how they tested, I dont think I want any of their products at all! Thank you! Now you have me curious about eventually running two psw505's. Time to do some digging/research... Thanks alot.. jk. I am an audiophile, unfortunately I am not loaded and flush with cash. So I do have to live on some kind of budget. I LOVE BASS! I hope I don't piss my neighbor's off too bad lol.
I just had the Sony sub for a day, already decide to return it. Compared to my 8' Klipsch sub that came out of a HTIB setup, it sounds like something that you could expect for exactly $100 bucks on sale. I already ordered the Dayton audio 10' on parts express and see how much better it gets, and returning the Sony ones. If both sound about the same, then I will save up and buy something that at least costs $300 bucks. People are saying the Dayton audio 10' are comparable to something that costs around #300 which is twice their cost, so I will see how it pans out when parts express finally ships it to me when it come back on stock.
@@chuckfriebe843 kinda sorta. When I first got them 20 something years ago, it was expensive to me lol. Now i have a speakers that are more expensive than most cars and trucks lol. Estelons! Simply beautiful handmade speakers, that sound amazing.
I clicked on the link out of curiosity. My speaker repair guy/ engineer taught me a lot in the 90s. But I love Audio equipment! That is a big job ! Testing, looking at and comparing specs. Etc.i subbed and liked. Cheers from Australia 🙂 👍
@@wkruse84 Never heard SVS, I know they specialize in subs. Also REL is supposed to be top notch. I mean for the price HSU is good value. I had the STF-2, just 10 inch but was solid for price. HSU would certainly dust all in this test, easily. But that would not be hard to do !!
@@andrewforsythe7240 Yeah, these are all junk subs. SVS used to be similar to HSU, they might be more expensive now, but I know they used to compete directly. I've got a sealed 12" and it is enough to for even a large room. I got it on a black Friday clearance of an older model. It was a few years ago but it was a $500-600 sub for $200. Even though it's more tuned for music than just pressure, I haven't felt the need to upgrade for movie watching. I would certainly never ever buy one of these subs. You can build one if you are on a budget but still want good bass.
Old adage: To each his own! What my ears hear may not be what yours hear. I purchased a Yamaha NS100SW from Amazon. It blended so well with my Onkyo TX-NR797, 9.2 receiver, I decided to buy another. Now the sound is perfect without any faints or gaps in action sounds. By using settings from my receiver (60 - 80Hz), all my speaker respond with base when needed! Example: The movie: "Battle: Los Angeles" when one of the alien drones came from behind, you could hear it from a distance and suddenly it was over head, like over your roof top, with the vibrations from the engines began shaking my entire body and then it speed off on my TV screen. OUT FRIGGIN-RAGIOUS!!!
back in 2018 I picked up a Polk Audio PSW505 12-Inch Powered Subwoofer for $199 but shortly after I bought it they raised it to $300+. I love it and it has tons of bass. Good video though.
I just ordered the ELAC bsed on this - the smaller size is a plus for me. It's replacing a Pioneer 8SW lost to a lightening strike. Possibly both of them are Andrew Jones designs
@@liana.chawngthu I go to Goodwill and look for smaller computer subs that have been mistreated, or have blown speakers. I have a small stock of 4.5-6" subs from speakers I've bought or been given to me. I add my special cap filter to the driver. I custom fit the driver to the cabinet. I prefer to attach them from the inside. I also have a stock if trigger, and banana clip post terminals( if the original is damaged) that I'll attach. I also pack the cabinet with old t-shirts to damper that hollow sound. I connect it to another cabinet. Right now that little mini sub is part of a mini home theater I built for my bedroom.
"LFE is just passthrough." What? The LFE input is for Low-Frequency Effects. It should be connected to the LFE or subwoofer out on your amplifier/receiver. Great video. Thumbs up for the test group, measurement process, graphs and especially letting your viewers know about multi sub. That is more important the cost of the subwoofer itself IMO.
thanks for the review! i also learned a lot from this. i have both the polk and the elac for my computer and tv setup. i didn't do much research when i ordered both. i guess i got lucky and got totally relieved after i watched your review.
Even those cheep subs should be good candidates to: 1. Connect to a DSP (for example miniDSP) 1.1 What I mean is we can do all the magic that a DSP can bring. 2. Get several instead of few more expensive ones. Connected to the DSP. One question is when you use DSP you can/want to use a fletcher munson/jbl curve or whatever. Those curves uses several dB gain at the 2 lowest octaves. That mean that a lot more energy (read watts) is needed. The difficult question is if the power in the sub's has enuf power in that type of setup?
@@one2moja1 good opinion. But buying expensive subwoofers that has a DSP built in is a waste. When the DSP is in the "wrong" location in your system. If you want to get a better integration with your mains. If you want to apply/try many different high level crossovers even on your mains If you want to have the ability to adjust all the frequencies that also your mains play If you want to get a digital input as a DAC with your DSP...
Looking at the graphs, the Yamaha and the Elac had the most consistent specs across the board, closely followed by Polk. It's a huge shame that the Yamaha doesn't have a crossover. The Elac is a huge suprise.
I'll try to remember to add that to the list. If you (or someone else seeing this) happens to have one they could loan out for testing, that would be helpful. Otherwise, I'll have to purchase it myself which means it may take a while (if ever).
Great video! Nice to see the data. I'd be really curious to see how that data would stand alongside blind ABX testing comparisons, if it would yield the same ranking results with a variety of listeners. Sometimes people find distortions of one sort or another pleasant to the ear, even if it doesn't measure well, and that's a very subjective thing.
Picked up a Polk Audio 10 inch 200watt powered Subwoofer PSW404 Second hand shop for $20.00 cash. Very good condition with no marks or scratches. Grill is perfect. Dual Voice coil with a range of 25hz-250hz adjustable low pass 60-125hz Plus 0-180 phase switch And an auto on/off detection circuit. Available left and right speaker connect input and output terminals. That beast is heavy around 45-50 pounds easy. Best deal I ever came across lately. This thing bangs better for the buck then anything I have found in 20 years.
Here from CAJ (as well as subscribed for several months). Another great video! While as a dedicated DIYer I'm not likely to ever be in the market for such products, I especially enjoy your budget speaker reviews. Thank you for providing this much needed service.
Thanks for the comparison. However, I have that polk 10, and It absolutely does not pick up 20 hz. I have ran several frequency tests on it and in stock form 32-33hz was just about the lowest it could handle with somewhat decent db levels. Probably an f10 @ 32hz. It's rated f3 is 40 hz and total low end response was 35 hz. It's port is literally tuned to 40hz. So from my experience, there is no way it's putting out an audible 20hz. I figured I'd mess around with it since i got it for cheap. I lined the entire cabinet with polyfill sheets, and I extended the port length by about 3 inches. This did improve the quality of sound, and i was able to hear a decently audible 27-28hz. However, all I really did was shift the curve to the left a bit, while sacrificing a bit loudness around the 40+hz range. This was ok in my situation as I was using it as a second sub in my home theater setup at the time. It now sits in my master bedroom as part of my 5.2 setup. It sounds decent for what it is. But at no point did it ever produce anything around 20 hz audibly. Hope the comment helps your algorithm
Thanks for the reply. I agree. There's practically nothing at 20Hz, relatively speaking. Measuring in your room may be why you couldn't get anything below 20Hz (if you have a suckout there). But, aside from *potential* in-room response measurement issues, it does measure at 20Hz. Just not much at all. It's relative. According to my data, 20Hz is down about 30dB relative to 40Hz. These size subwoofers are more like midbass modules than they are "sub" woofers. Hope that helps clear things up.
I have two budget 10" subs I purchased off Craigslist for $50 and $40 respectively. Adding their SPL together, they get me below 25hz in room at reasonable levels. (Around -5db or so) So for only $90 I was able to fill out the low end in my room without needing a sub the size of a coffee table.
I went with two of these cheap Elac SUB1010's after watching this video. They replaced a single, but fancier dual driver $600 Elac (SUB3010)... and they sound WAY better! I'd definitely agree with the recommendation of dual subs, totally worth it.
I can think of a couple of reasons why you might not mention it but that Yamaha runs on the same size amp that the 8-inch has and that it works in most situations very well. I'm just suggesting if you had that information, and noticed a problem, you might look for an excuse or mitigating factor. There might be a guy who wanted a Yamaha and would have very seriously enjoyed it. Thank you very much and though for putting in the work. for doing
Hi ! Thanks for your review, it's very helpful and I like to see true measurements. I might have a clue why the Klipsch failed the lower frequencies : I had a Jamo J10 which is exactly the same subwoofer but with a different branding (it even had "R-10SW" printed on its circuit boards). It has a very aggressive high-pass filter at around 28/30Hz. Below that there is virtually nothing, it's like a brickwall filter. I guess they did this to prevent excessive excursion and port chuffing, and thus increase global power handling while still providing a good SPL down to 30Hz (and your tests show that it has the higher SPL at around 30Hz). Forcing frequencies below 30Hz at a very high volume with a tone generator resulted in a kind of weird beeping digital noise as if the electronic filter was overwhelmed. I think this is why it did not pass the lower frequencies test. But while watching movies, even at a high volume, it did not exhibit this behavior and it was perfectly fine. It neved showed any sign of saturation, etc. It was a good budget subwoofer, but I since upgraded to a SVS PB1000 to get a true subwoofer.
Yea, one thing I forgot to mention was all these subwoofers had built in limiters that was very apparent at the middle frequencies of the tests (63Hz, namely).
@@Subway2400 without measuring the actual amplifier's outputs I can't say for sure. All I can provide (and have on my sheet) is the frequency response.
One thing this review does not show is the actual performance of these subs. I bought a Polk PSW10 and the port chuffing is unbearable and the sub is super peaky. The only way to solve this is by sealing the port (I used a T-shirt). Also, the Polk suffers from a very noisy power supply.
I just bought a Polk PSW10 to add a little more oumph to a vintage pair of KLH 17s. I have to say the set up is impressive sounding, even by today's standards.
I know this is more than what the budget target is for the video, but the RSL Speedwoofer 10s is a great bargain at 399.99. Small American company that sells direct and offers 30 day in home trial. Very accurate and articulate for its price point.
As a total beginner I'm so proud of myself of choosing Elac subwoofer. It has unpowered outputs for my Studio monitors. And I swear they sound way better going from the Elac than plugged directly into my DAC.
I really do appreciate the money and time that you have put into this it's definitely helped me in buying a subwoofer for the house. These sub companies should definitely sponsor your work. Thanks
I've owner several of the Polk PSW10's and I think they're great. I got them on sale for $89 in Canada and at that price point they are unbeatable. Even if you pay retail, you really won't be disappointed. I totally agree about buying multiples of these instead of spending more on a "better" sub. Another point to make on that train of thought is, you also won't have to drive them as hard to get the same or better SPL output than pushing a single to it's max. This will result in cleaner sound, less chance clipping and by not running the amp/speaker so hard, it should last longer. Also of course it does a much better job filling the space and improving frequency response. Plus, multiple subs in a home theater looks awesome. ;)
I'm doing this as well. Managed to pick up two of these at under 100 bucks and thinking about getting two more for a quadraphonic setup. FYI If you hear a woofing sound coming out of them, open up the back and rip out what looks like an X-Men logo on the port. People think these are blown but it's just that stupid thing making noise.
Superb comparison and I doubt people realize the time it takes to video, test and analyze all of these results. I can only give one thumb up, but two thumbs up are deserved!
Thank you, man. I appreciate that. And, you are definitely right... I don't think many understand the legwork that goes in to testing and analyzing the data before I even begin thinking about the video to present the results. It takes more than a full working day to complete one test.
Beans
Wow, Love your content Wililston, always awesome to see great content creators recognizing smaller channels!
You can only give one thumbs up? Dude I’ve given girls 3 thumbs up before
@@demonreturns4336 seriously how old are you? This isn't a frat house. Have some respect for the man's work .
Speakers compared based on actual test data?! What a concept. You earned a subscriber here.
You don’t listen to data. You listen to the sound. And that’s very subjective. Hats off to this guy for a great review but just wanted to clarify on what you said.
@@EAGLINWRX sound is not as subjective you think its.
I just want to hear a couple of songs each. I don't care about paper numbers. Real-world dynamic sound. I don't want some to tell me what they think it will sound like
I bought my Polk back in 2008 as an open box at best buy for about $170 and have loved it the entire time. I have recently paired it with a set of Klipsch quintet satellite system on a Yamaha receiver and it sounds amazing...
Also, "I have $150 to spend on a sub, what do I get?" "I don't know. Let me spend $1k to find out for you."
But why is it so hard, i just want some bass and not spend all my savings
@@Max-df5zp understandable
Hands down this is the most useful inexpensive subwoofer review I have seen. Very well done thank you for taking the time to do this
@@Max-df5zp I got scar SDR 600 W RMS 10” build a box buy $100 power supply or whatever supplies the right amount of amps for an amplifier I bought a 100 amp and I bought the 800 w rms scar amplifier. Or Buy the whole sub kit for 300- $400 and all you gotta do is buy the power supply takes a lot of knowledge, but it works a lot better
Got to love that Amazon return policy
Really good shootout. I expected the Polk to win based on my experience but happy to see it so well quantified!
I can dig it! Always interested in seeing budget equipment put head to head by an independent reviewer. This was a ton of work I hope people appreciate what you’re doing here.
Thanks man! I’m a fan of yours so that especially means a lot that you’d take time to reply here.
Erin's Audio Corner thanks! You’re doing the lords work here so the least I could do was drop a comment and share this video because a lot of people looking for a HT sub are definitely looking at these under $200 models.
I purchased my Polk PSW10 from a local auction for $40 and hooked it up to my living room system and love it. Even at full retail price it's an excellent performer!
Just started building my “newbie” vinyl player stereo set-up. Being on a budget and with limited space, this video was immensely helpful and insightful for me. Thank you for all the time and effort you put into this. You just earned a new subscriber 👍
man the effert you put into making this, going into all the granularities relevant to each unit using real data analysis, this is dedication.
This gets a sub from me pun intended!
This review and testing looks sound, great job on the level of detail. The only challenge here is the room factor with placement of ports. I have the Polk PSW10 and the Klipsch R-10SW and the Klipsch is noticeably louder in the large living room. It didn't even come close. Part of that had to do with how the port interacts with the rear wall. I'm not an expert in subwoofer placement, but it's worth a note. My Polk sub seems to "hit" a little harder, but the rear port on the Klipsch energizes the room more for deep rumbles/long bass notes.
Nice job!
You can reverse the the sub put the driver against the wall 6"-10" and have the Port pointing out tilt it up a bit as well
Tried the Polk and thought it was junk. Ended up getting the Klipsch. Satisfied.
We had a Polk PSW125. It was never abused or overdriven. After 2 years, it started to make a heartbeat sound. The amp failed. A new amp was sent and 3 years later, the same thing happened again. There were forums all over the web about this issue with PoIk subs. I wouldn't own another Polk sub if it were given to me free of charge. We moved up to an SVS sub. It was more money, but it's worth every penny. Much better construction, much more power, a much better warranty and most important of all, much deeper and more powerful bass.
You’re the man. I’m leaving this comment 1 second in because you’re the first video on these Amazon subs by someone who’s actually seen, used and touched the products they’re talking about in person instead of just reading off reviews or guessing if it’s good or not because of the brand.
i got my whole system for under $200. Yamaha receiver for $60 used Monoprice home-theater- in-a-box for $100. Just watched Hook with the reciever settings perfect and was thoroughly impressed. My dad won't let me use his klipsch kg3's but I've heard them before so i know my system is pretty decent for what I paid.
Picked up the Elac sub a few weeks ago to match with my speakers and I couldn’t be happier about it.
After 5 months, I’m still loving it. It really packs a punch. I will mention that I’m an average listener and not audiophile though.
I just bought a Polk PSW12 sub to use with Sony DH196 receiver and I couldn't be more happier. The quality and the sound of the Polk sub is outstanding considering I paid $139. I highly recommend it.
By far the best subwoofer comparison I've seen on youtube.
Not really, he shows the subs then goes to a website where you can also read it yourself in under 20 minutes, and the audio is echoing back when he does the screen recording.
@@masterofgames8261 he did all of the research and data though?
@@parkeranderson7155 $$$$ and look at the subs he examines, all the low end ones have some fatal flaw, then there's an these $500+ subs, why?
Freebies? Sales cash or just bad judgement?
Why no Daytons?
I mean, that's weird.
No klipsch, no Jamo?
@@1450JackCade I have no clue what you're on about
@@1450JackCade ,And his summation... Buy 2 or 3!!! What a Clown!!
Erin, fantastic job at presenting the variables and results from your testing! Really clarifies what each subwoofer is good at and more importantly, helps you decide which unit to purchase on based what you are looking for in your subwoofer! Thanks again!
Thank you!
I have a Polk psw10 for my outdoor systems. I figured for the price ($99 if you keep an eye out) I could swap out every couple of years. I keep them covered and the first one has been in use for about 3 years, the other for over 2 years in a salt environment.
I had the polk previously it just died one day after 3 months so i decided to give the klipsch a try and loved it to my ears it was more accurate to the original music with a more lively sound i will say the elac is interesting im running dayton audio 6.5 air bookshelfs with matching center channel and 4 inch air rear fills so not a klipsch fanboy overall great review thank you for your hard work
I was recently gifted a nice home theater system. Your easy to follow explanations, insights, testing, and commitment to help newbies like me earned you a subscriber for sure. Will be using your affiliate link this week to select the subwoofer that matches my needs. Bravo!🙂
Thank you for the great data as always. I'm currently neck deep in learning DIY home audio, and while you usually get better bang per buck by building yourself I can't see a DIY sub beating the Elac/Polk for the money, really astounding value.
I just built a DIY sub using SB Acoustics 8 inch SB23MFCL45-4 ported, and to be honest I should've went with the ELAC instead. DIY isn't always a great value.
I've had the Polk for years and it has been awesome 7 years to be exact.
Yes!!! FINALLY SOMEONE HAS DONE THIS REVIEW! Thank you! Thank you!
"Now we're going to flip her around to the back side." Yeah you did.
She got that boom-boom.
@@ErinsAudioCorner all about that bass
Exactly the review I was looking for, with the subs I was looking at. Thank you! I'm going to go for the Elac. Aside from performance, size and aesthetics are also factors I was considering. So I'm glad you took into account these various characteristics.
Sweet! Glad you found it helpful. 😀
Recently bought a used Polk psw10 for $60 ,totally satisfied..
Last year on black Friday I got the Polk Audio 10" for $54 new
I almost pulled the trigger on the Yamaha sub until I saw this video!
Based on your findings (and my budget) I just purchased the Elac sub.
THANKS for doing this great comparison video!!
Love that shirt! I was a kid in the 80s and the image on your shirt was first released as a poster. All my friends had it and we cranked up our stereos while wearing sunglasses 😎
Dude! Me too! Well, the kid in the 80’s part. I saw the shirt on amazon and clicked buy without even thinking. Stained it. Ordered another. LOL.
Thanks for posting this-great review! I have a Cambridge Soundworks PSW1 from the 90s that is still going strong, but looking to upgrade to something more "wife-approved" in the living room.
Polk audio is quality. I had some Polk audio subwoofers in my truck years ago and they were top notch for the money
Through trial and error I've found that I needed a minimum of 200rms to drive an adequate sub.
Also well worth the time to save enough to double+ your budget on subwoofer(s). Good vid, informative
Thank you for taking the time in reviewing so many subwoofers. I have made a selection upon your reviews and I am loving what I have invested in keep on rocking man
I've got a pair of Dayton Audio 12" powered subs. I searched coupons and one was an open box deal. I got the pair for about $233 shipped. I am very happy with the performance for the dollar. I don't have any particular bass management on my amp and am using the high level inputs. My room is a little wonky and they do a good job producing fairly solid bass at the listening position. I'm sure they can't compete with the high dollar subs out there, but the important thing is, they are good enough to enjoy and not a waster of the money I did spend. I don't plan to try to upgrade out of them until after doing something like a MiniDSP with a proper power amp and a calibrated mic for room/system correction.
The Dayton Audio SUB-1200 is the best sub under $150 new that you can buy. I don't think you will get any closer to that true deep theater rumble than the Dayton Audio for that price range (unless you get a steal on a used sub).
I’m a psw 10 guy. And I came to the logical conclusion like last Thursday of using one of the two subs in my room to represent lower frequencies than the other. If placed properly it’s a thing of beauty when low sound seems to come from an invisible source. And when you mentioned specializing two different models for two different jobs it made me proud to be a wanna be audiophile. New subscriber.
About 2 yrs ago i bought the wireless version of the klipsch sub to use it in the master bedroom "set up". Got it for $150 during Thanksgiving week deals on Amazon. For the price it pumps out some nice punchy bass but i have it set up so we can feel the bass more than hear it, it was able to fit on a corner next to our bed so it gives a nice "feel" effect during action scenes when watching late at night even at low volumes. Ive always wanted to give the polk a try due to its price but the higher watts rms and wireless ability of the klipsch and not to mention its iconic "cera-metallic" cone got my money.
Just ordered the Elac for the bedroom surround system, paired with the Jamo 803 mains, 801 surround and S81 center for a whopping grand total of about 375.00, complementing an LG Oled 55”. Thanks for the hard work doing the review! I may add the second Elac, depends how everything sounds when it arrives. Using an older Sony STRDN1050 for processing/amplification.
I've had my polk for about 10 years and it's still going strong and I play it loud quite often.
Thank you. This video has been a GREAT help. Helping a friend put together a HT system and I had no clue on what budget subwoofers to even look at. Video was simple and to the point which made it much easier to make a selection. My buddy is getting an Elac. Your channel is a hidden gem. You should have far more subscribers.
Glad it helped!
I followed your advice and got 2 Polks when they were on sale for $100 each and I've been VERY pleased with the results.
Good deal.
Thanks alot......I'm so glad I found this video. I just purchased Elac speakers and knowing I can have matching sub speakers makes me excited. A big thumbs up.
I have two polk psw10s on my atmos setup and they sound amazing
I run two of the polk psw-10s in my home theater & I love 'em! In my opinion, Polk makes some of the best entry level/affordable speakers out there.
Yea i like polk. The Andrew jones designed Pioneer are outstanding to for the price. Polk has better sub pioneer tower speakers are better. I have 2 tower speakers and the middle piece Pioneer than 2 polk rear surround. I have a acoustic 12 500 watt sub. That thing drills but its a little more expensive. Thats my living room. Then in my bedroom its all polk same setup just all polk with 1 10" polk sub. There awesome for the price.
I have a budget system a klipch subwoofer Im a audio person at my age I would not spend to much more for a just bass now if I had high end money then I would spend it but I don't my sub is good enough.
@@timothygreen2689 amen!
Got my Polk psw10 about 3 years ago because it was the cheapest and had good reviews on amazon. Boy was I happy with it and now this verifies my happiness.
Sweet!
Erin, what a wonderful review. I'll keep reading your posts on ASR, too!
I understand you tested just the 10 inches but I would love to have seen the Dayton Audio SUB 1200 and the Bic America F12 thrown in there.
Me, too. But there’s only so much $$$ I can spend at a time. I paid for all these myself.
I hope to test those in the next round, though. This isn’t a one and done. 👍
@@ErinsAudioCorner I totally understand. I look forward to it!
@@ErinsAudioCorner should be easy to return them to Amazon
@@konior21 I'm skiddish on that. I have heard of people abusing the return policy and then being barred from making returns and left holding a lot of stuff they couldn't send back. But, hey... if you wanna buy some, send them to me for testing and then have me return them then... ;) :D
Wow I was thinking the same thing!..ok ic there is a second round reviews coming up...Great!
Great work Erin. Appreciate all the time and effort you're putting into this!
Great job Erin 5 months later and yours is the BEST budget sub comparison on Ytube.
Wow, thank you!
I've got the Polk partnered up with a pair of retired JBL 15" carpeted DJ speakers powered by a $25 Lepai amp and wow, what a set up. Sure the JBLs could handle more power, but the Lepai keeps things under control and the Polk keeps up perfect. I am amazed at the bass that thing can put out. Like they say, my neighbors listen to good music whether they like it or not :-). Great video, thanks for the time and effort!
Thanks Mr. Perot. I know you are a fan of charts so it makes sense you’d like this data. 😂😉😎
I notice at 25hz and above the Klipsch outperformed the others. It's rated to 32hz +/-3db. Pretty amazing for a 10" budget sub. I had and sent back the Polk because of port, chuffing noise. The Klipsch is simply superb for musicality and tight bass well below 30hz, if not to 20hz.
I am gettin the Klipsch, but in most recent datasheet he upgraded datas and looks like klipsch not so good. Do you suggest to go on and buying it? I saw that it should go near 20hz with a good result
Thank you so much for your detailed, clear video! I have always wondered what the differences were and which to choose, you have just made my choice clear. Thanks again! Keep up the great work
Thanks for the positive vibes!
My PC system is a 2.1 set up with a Topping TP-60 Matrix Mini DAC Polk Audio PSW108 Polk Audio T-15 Bookshelf speakers. Super budget speaker setup and sounds awesome. Been using it for about 4-5 years now.
I bought the Polk Audio one after seeing this and it saved me $150-200. Perfect amount of punch for my surround and Like the forward facing air port was nice for placement by wall.
The Klipsch gain knob "goes to 11", haha!!! If it weren't for this review, I'd have picked the Klipsch based on this alone.
PS Audio does that too, they are in on the joke ;)
Nice comparison! The Klipsch still looks the coolest.
Haha. Yea... it definitely grabs your attention.
Great testing! It cemented the polk in my mind. psw505 12" is what I'm looking at. I was thinking about Klipsch but after I seen how they tested, I dont think I want any of their products at all! Thank you! Now you have me curious about eventually running two psw505's. Time to do some digging/research... Thanks alot.. jk. I am an audiophile, unfortunately I am not loaded and flush with cash. So I do have to live on some kind of budget. I LOVE BASS! I hope I don't piss my neighbor's off too bad lol.
I just had the Sony sub for a day, already decide to return it. Compared to my 8' Klipsch sub that came out of a HTIB setup, it sounds like something that you could expect for exactly $100 bucks on sale. I already ordered the Dayton audio 10' on parts express and see how much better it gets, and returning the Sony ones. If both sound about the same, then I will save up and buy something that at least costs $300 bucks. People are saying the Dayton audio 10' are comparable to something that costs around #300 which is twice their cost, so I will see how it pans out when parts express finally ships it to me when it come back on stock.
This is straight quality! Very clear, concise and right to the point, plus well informative data from your testing. You got an instant sub from me.
Sweet!
Just found your channel. Some great infor here. Much appreciated.
Thanks for watching!
Audio Users in the world need ppl like you....Keep up the good job man...
I appreciate that! 🙂
So this man spent his money to find out which sub was the best for his friends needs?! You are a great friend,,,friend!
Ron over at New Record day sent me. Great content and I really appreciated your in depth review of the Neumi BS5 as well. Subscribed.
Sweet! Thanks!
Absolutely love my Polk Sub, sounds so good
Had one and it was trash. My Def Techs produced better and deeper bass. Must have tiny satellites or really bad towers for that to sound good.
@@hehawkiller Just a small budget setup lol. As I grow the setup will change
@@hehawkiller I'm sure they do. They are really expensive.
@@chuckfriebe843 kinda sorta. When I first got them 20 something years ago, it was expensive to me lol. Now i have a speakers that are more expensive than most cars and trucks lol. Estelons! Simply beautiful handmade speakers, that sound amazing.
Pretty glad I got two Polk PSW10s. Awesome output with movies.
I clicked on the link out of curiosity. My speaker repair guy/ engineer taught me a lot in the 90s. But I love Audio equipment! That is a big job ! Testing, looking at and comparing specs. Etc.i subbed and liked. Cheers from Australia 🙂 👍
amazing work! fantastic! Such an amazing project!! wow...I may go for the ELAC for a small set up...
I replaced my Klipsch subs with HSU and couldn't be happier, the extra $200 was totally worth it.
Makes sense based on what I'm seeing.
HSU eats them all !!
@@andrewforsythe7240 SVS is better than HSU
@@wkruse84 Never heard SVS, I know they specialize in subs. Also REL is supposed to be top notch. I mean for the price HSU is good value. I had the STF-2, just 10 inch but was solid for price. HSU would certainly dust all in this test, easily. But that would not be hard to do !!
@@andrewforsythe7240 Yeah, these are all junk subs. SVS used to be similar to HSU, they might be more expensive now, but I know they used to compete directly. I've got a sealed 12" and it is enough to for even a large room. I got it on a black Friday clearance of an older model. It was a few years ago but it was a $500-600 sub for $200. Even though it's more tuned for music than just pressure, I haven't felt the need to upgrade for movie watching.
I would certainly never ever buy one of these subs. You can build one if you are on a budget but still want good bass.
Old adage: To each his own! What my ears hear may not be what yours hear. I purchased a Yamaha NS100SW from Amazon. It blended so well with my Onkyo TX-NR797, 9.2 receiver, I decided to buy another. Now the sound is perfect without any faints or gaps in action sounds. By using settings from my receiver (60 - 80Hz), all my speaker respond with base when needed! Example: The movie: "Battle: Los Angeles" when one of the alien drones came from behind, you could hear it from a distance and suddenly it was over head, like over your roof top, with the vibrations from the engines began shaking my entire body and then it speed off on my TV screen. OUT FRIGGIN-RAGIOUS!!!
back in 2018 I picked up a Polk Audio PSW505 12-Inch Powered Subwoofer for $199 but shortly after I bought it they raised it to $300+. I love it and it has tons of bass. Good video though.
my grandsons are sub-woofers...Bought 3 foot-longs the other day and before I got to the table they had woofed down 2 of them!
Granddad joke!
Thank you so much for this review, Erin. I bought an ELAC Sub1010 and it sounds great for a small room. Cheers!
Awesome!
I just ordered the ELAC bsed on this - the smaller size is a plus for me. It's replacing a Pioneer 8SW lost to a lightening strike. Possibly both of them are Andrew Jones designs
I run a 10 inch Polk in my garage/home gym setup and it sounds great! Back of the amp area does a get a bit warm when bumping hard for too long
I have both 12 inch polk and Klipsch, they make my rooms rumble! Great value and quality.
I build my own. My 6" passive subwoofer is my fav
Tell me how
@@liana.chawngthu I go to Goodwill and look for smaller computer subs that have been mistreated, or have blown speakers. I have a small stock of 4.5-6" subs from speakers I've bought or been given to me. I add my special cap filter to the driver. I custom fit the driver to the cabinet. I prefer to attach them from the inside. I also have a stock if trigger, and banana clip post terminals( if the original is damaged) that I'll attach. I also pack the cabinet with old t-shirts to damper that hollow sound. I connect it to another cabinet. Right now that little mini sub is part of a mini home theater I built for my bedroom.
"LFE is just passthrough." What? The LFE input is for Low-Frequency Effects. It should be connected to the LFE or subwoofer out on your amplifier/receiver. Great video. Thumbs up for the test group, measurement process, graphs and especially letting your viewers know about multi sub. That is more important the cost of the subwoofer itself IMO.
Thanks.
Pass through as in, pass through from the LFE channel of the AVR, etc.
thanks for the review! i also learned a lot from this. i have both the polk and the elac for my computer and tv setup. i didn't do much research when i ordered both. i guess i got lucky and got totally relieved after i watched your review.
Which is better? I’m thinking of buying.
LFE means Low Frequency Effects, which is literally the description of the range of low frequency that the Sub is capable of.
Even those cheep subs should be good candidates to:
1. Connect to a DSP (for example miniDSP)
1.1 What I mean is we can do all the magic that a DSP can bring.
2. Get several instead of few more expensive ones. Connected to the DSP.
One question is when you use DSP you can/want to use a fletcher munson/jbl curve or whatever.
Those curves uses several dB gain at the 2 lowest octaves.
That mean that a lot more energy (read watts) is needed.
The difficult question is if the power in the sub's has enuf power in that type of setup?
In my opinion, if someone is buying these subs, they wouldn't bother with DSP....but it's just an opinion of course.
@@one2moja1 good opinion.
But buying expensive subwoofers that has a DSP built in is a waste. When the DSP is in the "wrong" location in your system.
If you want to get a better integration with your mains.
If you want to apply/try many different high level crossovers even on your mains
If you want to have the ability to adjust all the frequencies that also your mains play
If you want to get a digital input as a DAC with your DSP...
Looking at the graphs, the Yamaha and the Elac had the most consistent specs across the board, closely followed by Polk. It's a huge shame that the Yamaha doesn't have a crossover. The Elac is a huge suprise.
ELAC is well respected in the audiophile community. I’m surprised they even make something at this price point.
11:45 this is pro editing; you took us to your page and showed us instead of just saying to go there. Props.
👍
I have the Polk. And 13 years later it's still sounding great 👍👍
There are a lot of haters for this Polk SW. I've had it for years and it sounds great. I have it paired with Micca MB42X. Budget price, amazing sound
Good stuff: I have been looking for a budget subwoofer for the last few months and I still haven't made up my mind
Try the klipsh
Great video looking forward for more, hopefully when you do the test on the 12’s you get the Polk PSW505 in there to..
I'll try to remember to add that to the list. If you (or someone else seeing this) happens to have one they could loan out for testing, that would be helpful. Otherwise, I'll have to purchase it myself which means it may take a while (if ever).
Great video! Nice to see the data. I'd be really curious to see how that data would stand alongside blind ABX testing comparisons, if it would yield the same ranking results with a variety of listeners. Sometimes people find distortions of one sort or another pleasant to the ear, even if it doesn't measure well, and that's a very subjective thing.
Picked up a Polk Audio 10 inch
200watt powered Subwoofer PSW404
Second hand shop for $20.00 cash.
Very good condition with no marks or scratches.
Grill is perfect.
Dual Voice coil with a range of 25hz-250hz adjustable low pass 60-125hz
Plus 0-180 phase switch
And an auto on/off detection circuit.
Available left and right speaker connect input and output terminals.
That beast is heavy around 45-50 pounds easy.
Best deal I ever came across lately.
This thing bangs better for the buck then anything I have found in 20 years.
$20 is a steal.
@@ErinsAudioCorner The Sub was in the back room where this little old lady was organizing new inventory coming in.
She had no idea what it was.
Lol.
You should feel bad stealing from an old lady like that. LOL (kidding)
What a great review you've put together here, That Sony is just a no-no...
OMG ❤️me encantan that collection
You should do more 10 inch subwoofers reviews like this by far the best video I have seen
Here from CAJ (as well as subscribed for several months). Another great video! While as a dedicated DIYer I'm not likely to ever be in the market for such products, I especially enjoy your budget speaker reviews. Thank you for providing this much needed service.
Thanks for the support, fellow Junkie. :D
Thanks for the comparison. However, I have that polk 10, and It absolutely does not pick up 20 hz. I have ran several frequency tests on it and in stock form 32-33hz was just about the lowest it could handle with somewhat decent db levels. Probably an f10 @ 32hz. It's rated f3 is 40 hz and total low end response was 35 hz. It's port is literally tuned to 40hz. So from my experience, there is no way it's putting out an audible 20hz.
I figured I'd mess around with it since i got it for cheap. I lined the entire cabinet with polyfill sheets, and I extended the port length by about 3 inches. This did improve the quality of sound, and i was able to hear a decently audible 27-28hz. However, all I really did was shift the curve to the left a bit, while sacrificing a bit loudness around the 40+hz range. This was ok in my situation as I was using it as a second sub in my home theater setup at the time. It now sits in my master bedroom as part of my 5.2 setup. It sounds decent for what it is. But at no point did it ever produce anything around 20 hz audibly. Hope the comment helps your algorithm
Thanks for the reply. I agree. There's practically nothing at 20Hz, relatively speaking. Measuring in your room may be why you couldn't get anything below 20Hz (if you have a suckout there). But, aside from *potential* in-room response measurement issues, it does measure at 20Hz. Just not much at all. It's relative. According to my data, 20Hz is down about 30dB relative to 40Hz. These size subwoofers are more like midbass modules than they are "sub" woofers. Hope that helps clear things up.
@@ErinsAudioCorner that actually does help clear things up. Down 30db at 20hz makes perfect sense
I have two budget 10" subs I purchased off Craigslist for $50 and $40 respectively. Adding their SPL together, they get me below 25hz in room at reasonable levels. (Around -5db or so)
So for only $90 I was able to fill out the low end in my room without needing a sub the size of a coffee table.
I went with two of these cheap Elac SUB1010's after watching this video. They replaced a single, but fancier dual driver $600 Elac (SUB3010)... and they sound WAY better! I'd definitely agree with the recommendation of dual subs, totally worth it.
Glad to hear it (no pun intended)!
I can think of a couple of reasons why you might not mention it but that Yamaha runs on the same size amp that the 8-inch has and that it works in most situations very well. I'm just suggesting if you had that information, and noticed a problem, you might look for an excuse or mitigating factor. There might be a guy who wanted a Yamaha and would have very seriously enjoyed it. Thank you very much and though for putting in the work.
for doing
Hi ! Thanks for your review, it's very helpful and I like to see true measurements. I might have a clue why the Klipsch failed the lower frequencies : I had a Jamo J10 which is exactly the same subwoofer but with a different branding (it even had "R-10SW" printed on its circuit boards). It has a very aggressive high-pass filter at around 28/30Hz. Below that there is virtually nothing, it's like a brickwall filter. I guess they did this to prevent excessive excursion and port chuffing, and thus increase global power handling while still providing a good SPL down to 30Hz (and your tests show that it has the higher SPL at around 30Hz). Forcing frequencies below 30Hz at a very high volume with a tone generator resulted in a kind of weird beeping digital noise as if the electronic filter was overwhelmed. I think this is why it did not pass the lower frequencies test. But while watching movies, even at a high volume, it did not exhibit this behavior and it was perfectly fine. It neved showed any sign of saturation, etc. It was a good budget subwoofer, but I since upgraded to a SVS PB1000 to get a true subwoofer.
Yea, one thing I forgot to mention was all these subwoofers had built in limiters that was very apparent at the middle frequencies of the tests (63Hz, namely).
@@ErinsAudioCorner Yes, it's not surprising that they have a volume limiter. But do they all have such an agressive high-pass filter ?
@@Subway2400 without measuring the actual amplifier's outputs I can't say for sure. All I can provide (and have on my sheet) is the frequency response.
@@ErinsAudioCorner Ok, thanks ! 😊
One thing this review does not show is the actual performance of these subs. I bought a Polk PSW10 and the port chuffing is unbearable and the sub is super peaky. The only way to solve this is by sealing the port (I used a T-shirt). Also, the Polk suffers from a very noisy power supply.
Boomy bass, bottoms out fast, can't take power, so glad I sold mine😂
I just bought a Polk PSW10 to add a little more oumph to a vintage pair of KLH 17s. I have to say the set up is impressive sounding, even by today's standards.
Rock on!
I know this is more than what the budget target is for the video, but the RSL Speedwoofer 10s is a great bargain at 399.99. Small American company that sells direct and offers 30 day in home trial. Very accurate and articulate for its price point.
I'll look in to them. Thanks for the suggestion.
As a total beginner I'm so proud of myself of choosing Elac subwoofer.
It has unpowered outputs for my Studio monitors.
And I swear they sound way better going from the Elac than plugged directly into my DAC.
I really do appreciate the money and time that you have put into this it's definitely helped me in buying a subwoofer for the house. These sub companies should definitely sponsor your work. Thanks
A great service to all audio enthusiasts. Thank you.
I've owner several of the Polk PSW10's and I think they're great. I got them on sale for $89 in Canada and at that price point they are unbeatable. Even if you pay retail, you really won't be disappointed. I totally agree about buying multiples of these instead of spending more on a "better" sub. Another point to make on that train of thought is, you also won't have to drive them as hard to get the same or better SPL output than pushing a single to it's max. This will result in cleaner sound, less chance clipping and by not running the amp/speaker so hard, it should last longer. Also of course it does a much better job filling the space and improving frequency response. Plus, multiple subs in a home theater looks awesome. ;)
I'm doing this as well. Managed to pick up two of these at under 100 bucks and thinking about getting two more for a quadraphonic setup. FYI If you hear a woofing sound coming out of them, open up the back and rip out what looks like an X-Men logo on the port. People think these are blown but it's just that stupid thing making noise.