You shouldn't be haggling when you've already decided to meet up! You haggle in the messaging system. You don't set a price and then pull up again and haggle more.
Oh, you waste so much spray paint. Do a couple quick bursts swiping over the surface, let it dry and apply a second coat. Many how to videos out there. That can should last for long.
Your videos are always good,with the paint tho you should slowly work your way up to a full coat and seal it with a clear coat for a nice shine and protective layer,and never hold the spray nozzle down every swipe lift your finger
I do this too! And I've had others do this with some of my builds as well when I put out something that is just insane value because I got the components at an insane price.
How much you spend on gas? (on a month) Youve seen "Nerd on a budget" on youtube? He made it possible to test hardware in the back of his car. That way he never get scamed
Just a heads up, when dusting case fans, or any fans in general, you should hold them. Allowing them to overally spin, can break the fans or even worse, cause a short. The chances of it happening are slim, but it is possible. Sadly, it happened to me.
I did the exact same thing bought atx mobbo and micro atx case and swapped the motherboard for the same motherboard you did (and buy me I mean the shop that I bought my supplies from)
Could you do a video on breaking down deals ex. how you find the price you paid for individual parts when you buy a whole pc or if theres easier ways to find market price for parts. Maybe its just me but being able to figure out the numbers of something helps me really understand whats going on
I started flipping after watching his vids around a year ago and you want to pay below market price for parts or whole systems if possible. By market price I mean sold used listings on eBay and finding the avg price among them. To keep track make a spreadsheet of parts you get and how much you paid and then make another spreadsheet with specs of computer you have built that are available to keep track of parts. Be sure to have some sort of system to keep track of sold parts/ computers and parts that are already in builds
Would be an easy side hustle but problem is nobody responds to me on marketplace, if they do it’s just to say it’s sold when they haven’t updated the listing to show it lmaoo
Probably best to leave the initial set up to the buyer, send some instructions and maybe a flash drive with the drivers they need. For testing games, you can probably use a windows to go drive that you can boot from, install display drivers, then test the games so you only have to install them once. Then make sure to use DDU to uninstall the drivers so they won't cause problems putting the drive in other PCs
Why even mentioning the fuk up with the atx board and matx case, when you actually did have an atx case on hand to use the atx board? That was really weird
you don't even need a windows key to unlock windows, there's a way to convince windows that it's an OEM PC, and so that it'll just unlock windows for you lmao
Deal hunting tip. Don't pay in hundreds. It gives you no room to haggle
It’s hard to haggle someone when you already haggled them down 100 bucks via text messages. 😂😂 Talking from experience
He teach you,not you teach him
@@boondock6055true
You shouldn't be haggling when you've already decided to meet up! You haggle in the messaging system. You don't set a price and then pull up again and haggle more.
Seeing you paint that way made my painting ocd go crazy
Oh, you waste so much spray paint.
Do a couple quick bursts swiping over the surface, let it dry and apply a second coat.
Many how to videos out there. That can should last for long.
ngl one of the most underrated creators 🔥
ye
skibidi toilet ohio sigma alfa gen
Your videos are always good,with the paint tho you should slowly work your way up to a full coat and seal it with a clear coat for a nice shine and protective layer,and never hold the spray nozzle down every swipe lift your finger
How does this guy not have more subs? The vids are crazy professional
No they aren’t, they are mid bro
@@Agent-201 u dickriding like crazy his videos definetly need more recognition
@@Agent-201eat a pp
that case was my first ever pc case, brings back memories
Crazy quality for under 30k subs. Keep it going man!
Good job man! Love the DIYPC case front panel
Thanks for the tip on Amazon warehouse deals! Great vids!
2:24 I like the activate windows watermark on a sponsored segment about windows keys
*As a flipper myself I always buy out PCs that are going for a good price on FB market to remove competition from my own listings*
I do this too! And I've had others do this with some of my builds as well when I put out something that is just insane value because I got the components at an insane price.
@@mr.arocenastech Even when I buy stuff as crazy good deals I still sell close market value, as people always negotiate down.
How much you spend on gas? (on a month)
Youve seen "Nerd on a budget" on youtube? He made it possible to test hardware in the back of his car. That way he never get scamed
Just a heads up, when dusting case fans, or any fans in general, you should hold them. Allowing them to overally spin, can break the fans or even worse, cause a short. The chances of it happening are slim, but it is possible. Sadly, it happened to me.
He literally said in the video he held them while blowing them out….
i just place some tape over them much easier then holding each fan...but i got 10 fans in my case lol
What got damaged in your case?
This man needs more views
Bro thats a steal for only 200💀
Not easy for me. Been selling my i7 7700k RTX 2080 Since summer for 735 pounds and still no one has bought it yet 😢 I want my money
Ur profit margins on that are crazy icl just lower the price
Which site
@@ChaoticEdits666 market place
did it sell?
@@ceo-potato yeah only 50 pounds profit though, sold it for 550, I'm just gonna aim for the mid range build now I can't be asked
Did you just put an unblurred valid Windows Key for everyone to see? 😂😂
at what minute?
Let’s go! New vid days are awesome
Most underrated glad your finally making it
I did the exact same thing bought atx mobbo and micro atx case and swapped the motherboard for the same motherboard you did (and buy me I mean the shop that I bought my supplies from)
Could you do a video on breaking down deals ex. how you find the price you paid for individual parts when you buy a whole pc or if theres easier ways to find market price for parts. Maybe its just me but being able to figure out the numbers of something helps me really understand whats going on
I started flipping after watching his vids around a year ago and you want to pay below market price for parts or whole systems if possible. By market price I mean sold used listings on eBay and finding the avg price among them. To keep track make a spreadsheet of parts you get and how much you paid and then make another spreadsheet with specs of computer you have built that are available to keep track of parts. Be sure to have some sort of system to keep track of sold parts/ computers and parts that are already in builds
@@shadowsaber3145could you please give me some more details as i also wanted to start, want to talk to you in personal so ,
Finally a new flippin vid
get one of those glasses that have camera built in to record
Hey i like this style of video i can tell it is slightly different :) awesome work bro!
Great tips!
Would be an easy side hustle but problem is nobody responds to me on marketplace, if they do it’s just to say it’s sold when they haven’t updated the listing to show it lmaoo
My man, did you just throw a Gibby ult in Fortnite?!?!?1
Where do you list your pcs please 🙏 im looking a budget streaming build
When pc flipping do you use your personal Microsoft account or offline account?
Probably best to leave the initial set up to the buyer, send some instructions and maybe a flash drive with the drivers they need.
For testing games, you can probably use a windows to go drive that you can boot from, install display drivers, then test the games so you only have to install them once. Then make sure to use DDU to uninstall the drivers so they won't cause problems putting the drive in other PCs
New video! Lezzgooo!!
what cable extensions you were using ?
Is £140 for an asus rog strix b550 a and a ryzen 5 3600x ?
Why even mentioning the fuk up with the atx board and matx case, when you actually did have an atx case on hand to use the atx board? That was really weird
Transparency
@@ElijahsLab about what
It didn't change the outcome or the price
@@TheR3dCaptainyeah exactly he could’ve just left that part out because he didn’t have to change anything. he didn’t have to mention the sama case
TY
W build
I own a pc computer
Please, avoid Adata SSDs, they are really bad
Never had any problems with them
The amount of one star reviews on them lmao
wish i was in USA to buy pc
My boyyyy
W content
Dude $17 for a windows key is crazyyy, you can literally get them for $4
How? Just started flipping pcs and that'd be appreciated 👌
@@GruelingFive8 gamers outlet website, they sell windows 10 product keys for $4 which should also be able to be used on windows 11 too
its quite literally a known website@@lightningamez4089
you don't even need a windows key to unlock windows, there's a way to convince windows that it's an OEM PC, and so that it'll just unlock windows for you lmao
@@Very_Questionable yeah and you'd get in alot of trouble if you activated it that way and tried to sell it 😭
I cant stop looking at youuu damnn!! so handsome
i was the 700th like now give pin plzlzlzlz
First
First❤❤❤