Not a problem buddy, I thought I had a recording of the dump valve in action but I didn't record by mistake and the owner had long gone by the time I noticed.
Just a question above the driver side driveshaft i got recirculating forge valve their should I do block that one off above the driveshaft and add the one in this vid or do I keep the one I have? Which is better I’m confused 🤷♂️ or can I have the recirculation valve and the dump valve at the same time?
this is sh** this cant never work with T socket splitter... buy forge open loop connect straight to plenum... and 2 tube which leads back to the turbo remove.. and and origo bypass you have to blind what is on the turbo
Not yet buddy all good so far, but the these ST's run a recirculating system and fitting a dump valve actually upsets this which would potentially cause a EML fault to occur like your self
hi when you blank the blow of valve with a plate because you are using different dump valve what do you do with the pipe by the blanking plate ,plug it or leave it unplugged thanks
Hi.I have no idea about cars and your videos makes it user friendly thanks.I just wana ask if there is a diffrence between a dump valve and a blow off valve?And if I put a dump valve as u did,must I leave the bypass valve that comes standard with the st turbo?that fault that u r getting,the emf or something like that,is it something to worry about,or can u just ignore it
A blow of valve / Dump valve are practically the same Buddy, as the ST wasn't ment to have a dump valve as it works on a re-circulation system dumping the excess boost to the the atmosphere can have a negative effect on performance etc and can through a EML, some people have them fitted with no issues but for me it's not worth it you can get just as much noise from a good induction kit
if you want sound relocate your ecu and fit some kinda con filter that's where the sound comes from. if you removed the ecu and rev it you get tu tu tu tu sound.
@Joe Dumn will try find out today buddy as I need to find out for another comment. There is no actual info on the pipe online so will measure the pipe.
Had to fault find a boost leak and found it was my BOV spring that was releasing the boost as it maxed out. Good video for me to locate and diagnose the issue myself. On a side note, that engine bay is filthy! Give it some love!
Yeah there is different spring variations depending on what level of boost you run and map etc. But once you have the right spring to suit they are good and faultless, hope you got it sorted buddy 👍
You probably dont care but does anybody know of a trick to get back into an instagram account? I stupidly forgot the account password. I would love any assistance you can give me.
@Eli Gianni thanks for your reply. I found the site thru google and I'm waiting for the hacking stuff now. Looks like it's gonna take a while so I will reply here later when my account password hopefully is recovered.
Wot u talkin bout Willis , you use a bong for your weed adam, damn u stoned fool.🤣 u mean a bung to blank the pipe. The other word is composer, not synthesizer that's for music👍
We need to hear that thing! :D
Good job and as always thank you ;)
Not a problem buddy, I thought I had a recording of the dump valve in action but I didn't record by mistake and the owner had long gone by the time I noticed.
ECP
Nooooooooooooooooooooooooo
Can i put this on my 1.0l fiesta wirh no turbo??
thank you for this it helped me
Glad it helped
Very informative video,cheers
No worries buddy hope it helps
Got an st180 now, got a Collins dump valve and I'm looking for where to fit it? Help lol
Apologises for the late reply. Hope you have got it sorted.
Thanks so much
Apologises for the late reply. Your welcome
I have seen that you have annulled the vacuum tube that goes to the intake. Nothing happens to you when you have it canceled?
I'm pretty sure will kept the vacuum pipe its been a while
Quick question. Can I install this on a normal 1.6 petrol focus? Just for the sound really
is that car any decent im thinking of getting one and getting rid of my 1.2 fiesta
Apologises for the late reply. Not unless it has a turbo fitted, either way I would not recommend it.
Apologises for the late reply. Yes great car
Just a question above the driver side driveshaft i got recirculating forge valve their should I do block that one off above the driveshaft and add the one in this vid or do I keep the one I have? Which is better I’m confused 🤷♂️ or can I have the recirculation valve and the dump valve at the same time?
Hi buddy no don't remove the recirculation valve you can just add the dump valve if you have the forge version that's a nice upgrade
Symposer delete Symposer lol. Is the recirc blanked?.
Apologises for the late reply. It did get blanked off if I remember rightly, its been a while.
@@ecp4538 2 years lol
Yep sorry, been extremely busy with huge life changes.@@Yii00T
@ecp4538 I hear ya there mate been the same myself lol.
So if im fitting (the same) dump valve surely i dont need a symphoser delete??
this is sh** this cant never work with T socket splitter... buy forge open loop connect straight to plenum... and 2 tube
which leads back to the turbo remove.. and and origo bypass you have to blind what is on the turbo
Do you also blank off the recirculation valve on the turbo ?
No buddy you still need that. 👍
Hi Adam can i put a airtec three inch downpipe three inch sport cat and three inch catback system to a standard st
Yes buddy you can put a 3inch exhaust system straight on.
Did you have an ESP FAULT afterwards? I fitted a dual port diverter valve and its been temperamental lol.
Not yet buddy all good so far, but the these ST's run a recirculating system and fitting a dump valve actually upsets this which would potentially cause a EML fault to occur like your self
Can i put a turbo smart circulation valve on the standard engine
As long as it's the right model for the ST as there is different variations
I just bought an st, it has a puma speed dump valve, but doesn't have the tube just the blue metal piece
Apologises for the late reply. Did you resolve your issue?
You need to also block the original recirculating valve or it will cause problems
This is true , probably best cause of action is to uprated the recirculating valve that gives you more blow of noise if that's what people want
william robertson is this the valve just above the driver side driveshaft? Do I just plug it with blank plug and plug the tubing?
I fitted one to mine as you did and my idle is constantly searching any ideas?
There is a possibility that you make have a air leek.
Also your Ecu will be thrown out as it does not know how to compensate for the valve unless it’s been tuned to have one fitted.
@@jamesjordan2232 yep that's one of the reasons they are not ideal for these cars
Does it make the pshhhhhh noise
It does buddy but you get more noise from a Ram Air induction kit
hi when you blank the blow of valve with a plate because you are using different dump valve
what do you do with the pipe by the blanking plate ,plug it or leave it unplugged thanks
Not quite sure what your referring to buddy can you elaborate a bit more
@@ecp4538 can you leave the original recurculating valve in place or has it got to be blanked cheers bud
Arrrr I see, no you can leave it on buddy
does it screw up the engine or turbo
marks perpersonally I wouldn't fit one as these engines are not designed to have a dump valve and can do the engine and turbo no good
Hi.I have no idea about cars and your videos makes it user friendly thanks.I just wana ask if there is a diffrence between a dump valve and a blow off valve?And if I put a dump valve as u did,must I leave the bypass valve that comes standard with the st turbo?that fault that u r getting,the emf or something like that,is it something to worry about,or can u just ignore it
A blow of valve / Dump valve are practically the same Buddy, as the ST wasn't ment to have a dump valve as it works on a re-circulation system dumping the excess boost to the the atmosphere can have a negative effect on performance etc and can through a EML, some people have them fitted with no issues but for me it's not worth it you can get just as much noise from a good induction kit
Pretty sure you need to blank off the recirc valve on the turbo side.
Going to fit a forge recirculating valve, what colour spring should I use for a standard engine?? Thanks
Hey buddy you will want the green spring
@@ecp4538 Hi, these don't give of any sound do they?
@@gav2011 no not really buddy, the system on these cars arnt designed for a dump valve
if you want sound relocate your ecu and fit some kinda con filter that's where the sound comes from. if you removed the ecu and rev it you get tu tu tu tu sound.
@@Mystro-92 yep agree an induction kit gives you great noise
I bought ST without sympozer so I do not know where is this pipe, this video does not show original place of pipe so I cannot work it out
Can you tell me if I need to do any think to the turbo or can I fit a dump valve with one blanking turbo. Thanks
Nothing needed to be done to the turbo buddy, just fit the blanking plate
@@ecp4538 sorry new to the st I keep on looking which plate you talking about.
What mm was the silicone piping? Cheers.
I will find out for you buddy, which one do you want, the pipe from the top of the dump valve or the other one?
The top one mate cheers
@@Wharfrat--80 no worries
@Joe Dumn will try find out today buddy as I need to find out for another comment. There is no actual info on the pipe online so will measure the pipe.
Hey buddy a bit late getting this to you, the return vac pipe is 5mm
Had to fault find a boost leak and found it was my BOV spring that was releasing the boost as it maxed out. Good video for me to locate and diagnose the issue myself. On a side note, that engine bay is filthy! Give it some love!
Lol cheers buddy it did have a clean not long after, I'm glad the video helped
Yeah there is different spring variations depending on what level of boost you run and map etc. But once you have the right spring to suit they are good and faultless, hope you got it sorted buddy 👍
You probably dont care but does anybody know of a trick to get back into an instagram account?
I stupidly forgot the account password. I would love any assistance you can give me.
@Jacoby Chad instablaster :)
@Eli Gianni thanks for your reply. I found the site thru google and I'm waiting for the hacking stuff now.
Looks like it's gonna take a while so I will reply here later when my account password hopefully is recovered.
I dont see the point in that setup when theres a diverter valve on the turbo that you can install a dump valve into
Anyone know where that pipe from the plenum goes?
If you take of the left hand section of the engine cover off you will see where the pipe goes buddy
@@ecp4538 hi thanks for the reply sorry I could of worded that better. The end of that pipe on mine doesn’t go on anywhere lol
dump valve = blow off?
Putting this on my dads car I’m 14 btw😂
Good luck buddy let me know how you get on
Wot u talkin bout Willis , you use a bong for your weed adam, damn u stoned fool.🤣 u mean a bung to blank the pipe. The other word is composer, not synthesizer that's for music👍
Symposer
Lol yeah your right I often get my words muddled up
Keep up the vids pal👍
@@vinnyrea5608 cheers buddy
Definitely don't let us hear what it sounds like anyway..jesus christ