Jets are as they came in that chinese PHBG-copy. Needle and atomizer are genuine Dellorto parts, had some 1/2-3/4 throttle issues with original chinese ones. Now it runs like a treat. Just rode about 50km's, didn't miss a beat.
I've got a genuine dellorto 21mm with a 90 main jet C clip on the bottom on needle and 60 idle jet and it runs good up to about 9k where is starts to break up, I was alot worse with a 80 main jet so I'm assuming I need to go up I'm going to try a 95 main jet when they arrive tomorrow, its a 70cc kit I have on it all full rebuilt bottom end and everything new coil stator, just need to fix this issue now, been through 3 carbs now a 19mm fake and 21mm fake and now the 21mm genuine and it definitely the best yet but still not sorted compression is about 115psi cold which should be enough to run decent, I'll change the main jet to a 95 and hopefully this solves the issue
I have stock rx 50 1989, excelent bike. Well, you a very good rider and bike goes fantastic. Do you make some modifikation on engine to put this airsal? What is price for kit, exhaust
Me too but i have a 1990, if you still have the bike, i have to tell you that, you and me have an rv6 not an am6 engine inside the bike(models until 93' have rv6) so what fits this guys aprilia, may not fit yours.
@@05smhusse tais olla 11k mittarissa kun vaihdoin pois. Se oli kyllä vielä periaattees käyttökelpoinen. Vaan kun kerralla tein koko koneen niin vaihtoon meni.
![YAMAHA DT 50 2004 [70cc athena] PURE SOUND 2 STROKE / RIDE / TOP SPEED / ACCELERATION / MODIFIED](http://i.ytimg.com/vi/-6bmvX9UL78/mqdefault.jpg)
أحسن مطور وأحسن مكينة دوزتها وعمري ننساها ابريليا RX
Какой расход на 100км?
Super !
What size is the trottle cable on it please i really need to know
I run stock 2003-2005 RX50 Racing throttle cable.
Going to build a 80cc one and this is my first time on a engine work so
Even apply the big bore kit then the rev limits are still same?
you change the crankshaft?
It had stock crankshaft at the time when I filmed that clip. Since then I rebuild whole bottom end and swapped it to a Artek K2 Evo crank.
Which fender is on this RX?
RX original
Saako noita kierrosmittareita uusina jostain?
Where do you buy the 21 mm carb.?
I think I bought it from eBay, they are also available on Aliexpress and Wish.
How big drev have you
Itekki oon ajellu tuolla päin.
Was mussten sie außer dem zylinder umbauen?
Überprüfen Sie die Beschreibung, dort habe ich alle Änderungen aufgelistet.
What size carb and jets ?
Chinese Dellorto PHBG 21mm clone with 90 main jet and 50 idle jet.
What 70 kit and any changes to the crank or reeds ? And fly wheel?
Read the video description.
My bad just read it cheers mate 👌
what jetting are you running in the 21mm carb??
Jets are as they came in that chinese PHBG-copy. Needle and atomizer are genuine Dellorto parts, had some 1/2-3/4 throttle issues with original chinese ones. Now it runs like a treat. Just rode about 50km's, didn't miss a beat.
I've got a genuine dellorto 21mm with a 90 main jet C clip on the bottom on needle and 60 idle jet and it runs good up to about 9k where is starts to break up, I was alot worse with a 80 main jet so I'm assuming I need to go up I'm going to try a 95 main jet when they arrive tomorrow, its a 70cc kit I have on it all full rebuilt bottom end and everything new coil stator, just need to fix this issue now, been through 3 carbs now a 19mm fake and 21mm fake and now the 21mm genuine and it definitely the best yet but still not sorted compression is about 115psi cold which should be enough to run decent, I'll change the main jet to a 95 and hopefully this solves the issue
I may add that this is my other account i am coldyoyoable12 just logged in to the wrong one 😂😂
Mitenkä vetää nuilla väleillä ku itellä 70 sport airsali se sun gianelli 21pwk jne ja 11-65 välit silti kulkee 85
Jotain 95-96 tuo jaksaa mennä, nykyäänhän tuossa on vielä se Top Performancen pidempi 6. vaihdekin. Samoihin se meni sillä Giannellillakin.
@@McPaavola joo kun tuntuu aika lyhkäsille nuo välit
I have stock rx 50 1989, excelent bike. Well, you a very good rider and bike goes fantastic. Do you make some modifikation on engine to put this airsal? What is price for kit, exhaust
Me too but i have a 1990, if you still have the bike, i have to tell you that, you and me have an rv6 not an am6 engine inside the bike(models until 93' have rv6) so what fits this guys aprilia, may not fit yours.
La mia aveva l 80 carburatore 24 24 scarico giannelli 115 km h
Hyvää syöttöä poikani
Kiitos poikani.
Äjä sul on ihan samalainen aprilia rx50 niiku mulki mut mul ei oo vaa crossi renkait siin
Oliks sulla mikä kampura täs?
Artek K2
@@McPaavola kestikö vakio kuinka kauan?
@@05smhusse tais olla 11k mittarissa kun vaihdoin pois. Se oli kyllä vielä periaattees käyttökelpoinen. Vaan kun kerralla tein koko koneen niin vaihtoon meni.
top speed?
About 95km/h
My old one the clocks couldn't keep up 🤣
ookko nää myyny ton?
En tokikaan, tallissa odottelee tulevaa kesää.
Is it worth getting one as a first bike? Im 16 and i wanna start riding,but i want something cheap and kinda slow :)) found one for 350€
Yes, these are really worth of money. Suspension and handling are really good and so is engine too.