+ghettobird2012 Yea i need to get another camera set up for an overall shot of when I do stuff, but i figured the zoomed in of the bolts and other pieces would help.
Alex Hex People should not be allowed in the back after putting a bar in. It is way too dangerous but as far as getting things out, it's not a huge deal it doesn't stick out too much.
why did you put back the oem harness?i would just install new racing harness along with the harness bar and got rid of the stock harness ,just dont look good to me.
+Al Blades The shoulder harness will wrap around the bar and then it has a plate with slots to wrap the strap back through, and the the lap belts are are bolted into where the normal seatbelt spots are and for the antisubmarine belt, I have that bolted to the floor underneath the seat.
The widest part on the b-pillar is 48 inches, and that is the size bar that i have, you can get smaller length I guess too if you adjust the seat belt connection higher.
So as you adjust the seatbelt connection higher you get a slimier length in the bar? so that means if you move it up higher you can get a 49" or even 50" ?
it's not to bad luckily we have decent room in the back. with that being said it is a lot more dangerous because you have a steel bar around chin level.
+Devan Kelsey The mounting holes are 48 inches apart. The NRG bars have a couple different sizes and the attachment points are kind of adjustable so you can have some play and I would home they come with a spacer to help with fitment.
I wish we could've seen a full view of the bar in the car instead of zoomed in the whole time
+ghettobird2012 Yea i need to get another camera set up for an overall shot of when I do stuff, but i figured the zoomed in of the bolts and other pieces would help.
I wish I saw the zoomed out version instead of the close up. can I gt this for the 2002 bugey!
09.05.19 - How are they better than the original seat belt mounting system>
Not really better just different, a bar let's you install a race harness.
how difficult does this make it to get people and large objects in and out of the backseat?
Alex Hex People should not be allowed in the back after putting a bar in. It is way too dangerous but as far as getting things out, it's not a huge deal it doesn't stick out too much.
why did you put back the oem harness?i would just install new racing harness along with the harness bar and got rid of the stock harness ,just dont look good to me.
Juan Nunez It's just for ease of use, like if I have a 2min drive somewhere putting on 5 points get old after a while.
what length would you say the washer you used was?
Why put the the original seat belt in if you’re using harnesses??
Daily (street use) and track use (harness) most likely. 6 pt not always legal/ always ideal for street.
care to share where you get hold of a set ? thanx mate
+Wilson P.K.L The bar i got used from nasioc and the harness i think was off jegs.com or summit
Hey wondering on putting one in my 03, how much backseat space does it compromise?
Theres not a whole of room back there anyway but i wouldn't recommend putting people back there.
hey im buying the same thing soon just wondering where the actual harness all bolts to?
+Al Blades The shoulder harness will wrap around the bar and then it has a plate with slots to wrap the strap back through, and the the lap belts are are bolted into where the normal seatbelt spots are and for the antisubmarine belt, I have that bolted to the floor underneath the seat.
+ynotbmx88 awesome thanks man!
can people still fit in the back seats
They can but I would highly recommend against it, the bar is right at teeth level and if you got in a wreck it would be a bad day.
thanx mate....
An chance you know the size of it? i know the sizes very
The widest part on the b-pillar is 48 inches, and that is the size bar that i have, you can get smaller length I guess too if you adjust the seat belt connection higher.
So as you adjust the seatbelt connection higher you get a slimier length in the bar? so that means if you move it up higher you can get a 49" or even 50" ?
30lbs of boost_jpg The opposite, the widest part is 48" so as you go up it will be smaller, 47" 46"
Oh! Okay thank you for all he help. I've been trying to figure this whole bar situation out.
Glad I can, let me know what you end up going with
do you need the spacers
Chase Anderson for me yes I did need them but if you think that you wont and that will work best for you then don't use them.
Would a length 48.75 fit?
hunter23pierce I am not sure but you would just have to measure on your car between the two bolts, and you can move the bolt position to help
Is your back seat still functional as far as how much room you have? I've been debating getting one but I'm not sure how practical it would be for me
it's not to bad luckily we have decent room in the back. with that being said it is a lot more dangerous because you have a steel bar around chin level.
Will this fit and work in a 2015 wrx limited ?
You will just have to check the fitment when ordering it, I am not sure of the size differences between the cars.
okay thanks bro
what is the length of the bar you used?
+Devan Kelsey The mounting holes are 48 inches apart. The NRG bars have a couple different sizes and the attachment points are kind of adjustable so you can have some play and I would home they come with a spacer to help with fitment.
+ynotbmx88 thanks!
Hey how did you move the belt point down??
Adonay Rogel just move the latch that the belt attaches to on the b pillar to where ever you need it
$ ???? chile
this is not a how to video, your guessing.