How to Clean a Vintage Safety Razor
HTML-код
- Опубликовано: 9 фев 2025
- I use a lot of vintage safety razors and I get a lot of questions about how I clean them and get them ready for shaving. Here's a video explaining my process for disinfecting and cleaning a vintage safety razor. Others may have their own process for cleaning, but this is my technique and I've never had a problem.
Get a discount on anything you buy at www.executive-shaving.co.uk by using offer code SINATRA5
Check out my coffee mugs and t-shirts for sale: teespring.com/...
Buy my Sinatra Lennon signature shaving brush from DS Cosmetics here: bit.ly/2WFN4m1
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Hello! I've been shaving with a DE since 15 thanks to RUclipsrs like you, I am now 17 and in the army and I am thankful I learned to shave with DE really clean shave when doing drill on the weekends ✌️. Keep up the content :)
Thank you for your service! You’re ahead of the game, that’s for sure.
@@SinatraLennon started with a mini Van Der Hagen upgraded to the Parker 99r
in the US military? you're parents signed a waiver so you could join?
Thank you for your service. God bless you! 🙏
I soak them in 50-70% rubbing alcohol. It kills most germs in 30 seconds, but I let it soak for about 10 minutes anyway. Then I lightly scrub with antibacterial hand soap and a toothbrush.
Similar to how I do it.
griff What if I use 90% rubbing alcohol
@@LaplacesDemon494 I've actually heard that 90% is less effective some how. Weird I know.
@@LaplacesDemon494 may be you would kill Covid -19 with that as WHO has recommend 😆😆😆
In addition to everything SL did (especially if you have TTO razor) I drizzle mineral oil into the moving mechanisms for lubrication (ie. The hinges on the butterfly doors, down the rod that sticks out the top where the blade goes, the adjuster collar, and into the bottom of handle around that rivet cap thing). It helps keep it lubricated and functioning well :)
Instructions not clear enough ended up making myself a 3 course meal.
Ha!
Wouldn’t want to clean my vintage Gillette’s that way and I cleaned a lot of razors, I have 70 vintage Gillette’s. Sometimes the boiling water can dull or stain the vintage nickel or gold plating. I just buy 99% alcohol and soak about 2 to 3 minute then put into my Barbicide jar for about 5 minutes rinse and then a few drops of lubricant in the normal places and you’re golden. Do do on occasion use an old toothbrush and some antibacterial soap to scrub off the soap scum them I do the other steps. Just my way and I’m sure other collectors do different than I do. Whatever works. But I always live your videos Sinatra, have a great weekend.💈💈💈💈. I ordered one of those white handled slim twist made in England razors the other day off EBay when you posted your video of yours. Should be here Monday. And I love the Beatles too.
I was sitting in a restaurant in Edinburgh when this came through. I thought I was seeing things! SinatraLennon cleans razor shock!😂
Just took the plunge with purchasing a ‘62 Gillette Slim Adjustable DE razor, which could do with some TLC to remove the gunk and grunge accumulated from previous luvvin’s. The tips in this video & comments below are testament to how helpful the shaving community is as a whole. Many thanks to yourself, Brian, and to all. 👍🏼
Shaving god! Seeing this notification made my day!
Cool! Good to see ya Kaden.
I soak new vintage razors in barbecide for 10 mins. Then scrub with antibacterial dish soap. Then I put it in my ultrasonic cleaner with a drop of dish soap to clean the nooks and crannies, especially for TTO razors.
What's up sinatra !!!
Definitely an excellent way of sterilization, of course exclusively for vintage's safety razors, now with the appearance with respect to the metal I think not to worry since the state of wear and rust marks reflects a long useful life, I for example have a Vintage Gillette and only sterilize it but never restore it I prefer its status as a war veteran.
Cheers ⚔️💯👍🏻
Great topic. I use a sonic cleaner with a small amount bleach to disinfect.its the same sonic cleaner used by jewelers etc. I use it to clean gun parts as well. Spotless 💈
Perfect timing as my 1962 Slim Adjustable just came in 😁
Luis Massaro my 1962 slim adjustable is on its way 😃
I just got 1962 Slim adjustable at a antique store. Let us know what blades you like in it. So far I have tried perma sharp, and WIlkinson Sword. I would like somthing smoother. I hate having to find which bladework for me for every new razor I get. :(
@@coffeegrinder6319 Derby blades are my go to, and never fail me I have sensitive skin and always work good for me
CoffeeGrinder 63 Hey 👋🏻.. The Gillette 7 o clock green is a very smooth blade in my opinion.. but then they are not very efficient.. I love using the polsilvers I have.. but I try every new razor with a gillette wilkinson sword which has to made in India..
@@coffeegrinder6319 try the Gillette Nacet it's not middle and not an agressive blade, it works very well for me but what it works good to someone can't work on the same way to the others.
Another very cool blade it's Voshkod, give it also a try.
Try using a whitening toothpaste if you have it. The crystals in there can help remove extra build up. Tip I picked up from cleaning water-cooling parts from a PC.
I just put mine in the silverware section of the dishwasher with the barn doors open when I run a load of dishes. I feel the water will will kill the germs on your plates it will kill what’s on the razor. I used those Cascade platinum pods and my razors come out looking brand new. Even the deep seeded grunge in the grooves of the handle.
Great idea!
Scrubbing bubbles work amazing
I can attest to this!
IMO tossing it into already boiling water is probably not a good idea. I'd place it into the water and bring it up to a boil and as soon as it does, you could just turn it off and let it cool down. This way temperature change is not immediate which *may* cause warpage of some thin metals.
Thank you for this video. I just acquired an 1930s Gem Flattop "G-Bar" and will be "dolling" this up asap! Also listening to some Sinatra as we speak.
Cleaning grandpa grungy in a pot in the kitchen. More elder abuse😱🤯
👍💈
“I’m gonna pretend like this is a brand new vintage razor I just got”
Step 1) ask for a refund 😂
Never!
Wow that is so easy,I do have barbasol and I use it on my 1974 vintage Gillette, I just ordered a 1950 something I should get it in mail today. I'll try this.Thanks man.
I do mine similarly. However you don't need a rolling boil Just near boiling is all you need. Also I add some vinegar to the water, it is a natural disinfectant, and has other properties when it comes to cleaning things. Hot vinegar water is great for cleaning old brass razors too. The toothpaste isn't a bad idea, but use the old fashioned white kind. It is basically a very mild buffing compound. Use it on the handle as well. I use an actual metal polish, but the toothpaste can work it does take more elbow grease. By the way toothpaste and a buffer can remove those tiny scratches from windshields that only show up when the sun is at a certain angle. By the way, in case you're wondering, you only have to heat the razor to above 140 degrees for about ten minutes or less.
Whewwww. Scared me for a second. Loll. I thought you were gonna make Grandpa Grundy not Grungy no more. Haha. I was like NOOOOO! 😮😮😮😄😂👍🏼
Then He would just be Grandpa 😂
jason shone Hahaha. Clean Grampy. Lollll. 🤣
I would never clean him or replate him. Never! 😆
SinatraLennon Goood! Almost gave me a heart attack! NOT GRANDPA GRUNGY !!!! 😮😫😔😂👍🏼 That dang razor's pretty famous! 😏😁📸🎥👍🏼💈
Great birthday gift, today's video!
I got to learn how to clean a safety razor SinatraLennon style, as well as a mini house tour if you can call it that!
That shirt gives off Tim Roth from Reservoir Dogs vibes!😁😁
Happy birthday!
@@SinatraLennon thank you sir!😊
I generally do the boil myself since it also loosens up any crud within the barrel of the TTO and adjustment mechanism as well. Sometimes I'll use tongs and a glove to pull it out, move the mechanism then put it back in again. For regular cleaning I just use scrubbing bubbles, less than 5 minutes seems to do the trick and doesn't destroy the finish HOWEVER I don't do any chemicals with any gold/rhodium razors though unless they've been replated and I know there's lots of material on there.
Well thank you sinitra! Many steps i use to miss.. Nice informative lesson today
I have been putting the rasors, opened if a butterfly or as disassembled as possible, in the ultrasound cleaner for 1/2 hour
Great info. I like your style Sinatra ,cool calm and collected.
Great tips! You should have closed it out by singing ‘l did it my way!’ 🎤
That is a beautiful kitchen sink! Also love your voice!
Hey, thanks for the lovely comment! I do voiceovers for a living.
Very thoughtful video sir! Thanks man. Have a great weekend!
Remember people you do not want to over cook your razor, you just boil until Al Dente.
Ha!
Lol, I bought that exact model at an antique mall. I'm here because I want to clean it before I use it the first time.
Another excellent video Phil, from the UK 👍
"Old grampa grungy is shimmering, glimmering, in the sun... Sorry, it's just how my brain works, I'm a musician too! And a huge Beatles fan! Keep up the great vids, take care man!
This is the vídeo I Need, today a friend give me 2 used Gillette Safety razors .
Soft Tooth brush and Simple clean- q-tips in tight places and hot water rinse does wonders.
For old darkness spots, a very weak slurry of Flitz polish and warm water where it runs off the razor easy but can still be applied also works. It takes practice. Saved old scissors this way
Rinse off, dip in barbicide for 1 minute. Done
I clean them almost the same way, but I add two more actions. After the soapcleaning I dry it and then I take a silver polishing cloth and rub it untill it shines. (Do not use the liquid silver polish, the acid will destroy the chrome!) And finaly I give it a drop of oil in the handle.
Great video. Thanks for posting.
I recently acquired a Fatboy bottom 9 F4 along with a pack of blades. I need to clean it so I can sell it. I want to clean it without harming the finish. I believe it has the brass finish. I watched a video on how to take them completely apart but I think I'll leave that up to the buyer. I used some chemicals on a few pieces of jewelry that ate some of the finish off. I usually clean jewelry with toothpaste. I hoping to get some much needed money for the razor though it's tempting to keep it because my daddy used one all of my childhood.
So many different methods of cleaning reading the comments. I just use dawn dish dish soap with a toothbrush, which works very well for cleaning and disinfecting. I will also put razors in the dishwasher, which works very well and won't ruin their finish.
Nice guide! Thank you SL!
Hi Andrew from Kent in England. Question how do you free a seized shut head Gillette Rocket?...😮 thank-you mate#
I like your copper sink.
Thanks for the tip! You always give good advice.
Thank you so much.
Thanks for sharing this video clip 👌😎 Sir. Sinatra Lennon
Would you do the same for modern de razors?
great video help ful to me my friend thanks .
Hi SinatraLennon. Would you recommend vinegar?
I keep mine relatively clean anyway I just use a soft to medium toothbrush with warm soapy water it works for me 👍
Thanks for the videos, I have 3 antique stores nearby and hope to score a razor. Yes rubbing alcohol will work well. During boiling have you tried a tablespoon of vinegar? It may remove some of the old scales.
I like to use White Vinegar on old razors just let it set in it for 24 hours it gets off most all oxidation , scrub and sanitize dry then oil.
Good timing for the video. Mine is due for a clean
I used to bring water to a boil and let the razor sit in the hot water but as it cools down. Now I just go to town with toothbrush and normal dish detergent (not dish machine stuff) and then 5-10mins in warm water in my ultra sonicator (bought cheap on eBay). Then more toothbrush and dish detergent. Toothpaste is a very mild abrasive so it works well for polishing, but I use a very mild polish product instead - if I need it.
I just seen this vid on cleaning DE razors does boiling take off the painted numbers on a Fat Boy I purchaesd two from ebay in nealy mint condition and I like to use them.
Scrubbing Bubbles scrub, rinse, followed by a Barbicide soak... That stuff kills everything!
I use to do, half an hour submerged in alcohol 90% after I change to alcohol 70% another half hour. Then I clean with a toothbrush with whitening toothpaste about 3-4 minutes (sometimes a little more), depending the condition of the razor and rinse with hot water and it's done.
Cheers
Thank you sir, for the great videos! Quick question. Does the same process apply for bronze and brass razors? I recently acquired a beautiful Gem 1912 that is all brass so I’m wondering if the same goes with brass. Thanks in advance for your help!
For me, a Gillette 365 blade in my Fatboy may be the perfect the perfect shave. Super smooth with no razor burn. For some reason that razor doesn't like the slickery 'Artisan Soaps' or even the Wool Fat soap.
Quick question: I just picked up an exact razor to this! Can you tell me how the adjustments work? Is 1 the most aggressive, or is it the most mild? Thanks!
--Michael
Nice video and class ring 😆is that a UT ring
It is a UT ring!
@@SinatraLennon Let go longhorns 🥳!
As a cook... When dropping something into a hot liquid - always drop it in, away from you. 😁
Good advice.
Awesome video
Thank you for the guide.
I have a razor like this (I don’t believe it’s a vintage one) and ive noticed it’s starting to get rust a little under the flaps. Any tips on how to clean it? Or is toothpaste suitable? ive mostly been wiping what I can away with a qtip but I haven’t been using it since I noticed the rust.
Can't agree with boiling razors. That compromises the metal and I would never use that method.
That sink is sick!! Looks like straight copper
I think it is!
What's the best way to clean the plastic handles, for instance on the Gillette Black beauty razor?.
Cheers🥃
Some good soap and water.
Great video! Next time you could really get formal and don a cutaway😄
Stupid Question, I just bought a 1976 Gillette Super Adjustable Razor, I know that the plate is plastic, is the handle also plastic as well?
I got mine from my Step Grandpa's who was a CB at Pearl Harbor
Hey Bob, Thanks for your suggestions, boil water is the top for me. Ciao
Thank you for the how to!
I’m waiting for my made to order rhodium plated Fatboy from Razor Emporium! Should last forever.
5:55 that’s very awesome to brush the safety razor to refurbish after boiling the hot 🥵 water 💦 with the pot from the stove.
Is this safe for the plating?
hello my friend..if i use a cheap safety razor wont i have a good result? thank you
It might be okay, but a better razor usually gives a better shave.
SinatraLennon please i need your help..is Feather double edge razor good?
Almost same way i do it.but i do not boil it. Clean it the same, put it in the dishwasher, rubbing alcohol, and if needed light polish
Can ya get your hands on some rocky mountain barber company products and do a review?
no mineral oil dropper at the end of the process, to (re) lubricate the moving parts?
Hello, big fan of you although silent here, could you please help me with a vintage safety razor that I bought? I would like some tips on how much is worth and how should i clean it. Thanks! Please tell me how to get in contact with you if you want
I do close to the same.. I use a old electric toothbrush head put back on my electric toothbrush use Toothpaste or dawn soap.. Then dry n polish cloth
what could go wrong if I just simply put the razor in a cup and pour boiling water into it? And wait 5 mins? Water won't be slightly less than boiled but I wonder if that would work?
I just learned about using toothpaste. Most of the time I'll soak them in isopropyl alcohol. The use a toothbrush and scrub them wish dish detergent and hot water.
Can this method be used on a Gillette slim?
Yep!
I assume Gramps is stainless steel. Can you boil the chrome razors too?
Hmmm, not sure.
The Gillette Fatboys were not stainless, hence the brass showing through on the handle. They are brass with either nickel or gold plated. If you want to boil your razor but are afraid of the heating element touching the bottom of the pan being too hot and harming the razors plating you could place your razor in a different container and then pouring the boiling water over the razor and letting it soak in that water. Boiling is 212 F, but germs will die at 185 F, even after pouring the boiling water over the razor it will remain above that 185 F for long enough to kill everything.
Where did you buy Grandpa Grungy at?
eBay.
The question is how to dismantle this type of a razor to clean the inside screw in order to the screw works smoothly?????
You should try fairy liquid next time that's good
I Have My Grandma's Old Vintage Schick Lady Injector Razor Handle How Do i Clean That Because it Has White Like Plastic On it's Handle
Breaking News The phone mount I ordered has arrived shaving videos to commence soon
Having complications going to keep working on it
If it gets rubbed in soap each use, you can probably just give your daily driver razor a quick cosmetic cleaning with toothpaste once a year or so
....granpa now looks 20 yrs younger....
Informative video, thanks. I soak my razor heads in rubbing/isopropyl alcohol between shaves. Somewhat similar to the Barbacide treatment you mention. Extends the life of the blades as well. #HookEm
i always thought the razor handle was green🤣🤣🤣
Why did barbasol go from 10z cans to 7oz ?
They still have the 10oz as well.
@@SinatraLennon havent seen it in the sunshine state
Now i know how to clean my fatboy Sinatra style!!! I normally put mine in the dishwasher then put a little mineral oil in it 🪒👍
That’s also a good technique!
I have a similar razor 🪒 and it’s stuck won’t open . How to I open it again will boiling water work ? What do you recommend?
There is a company that does total restoration for razors but very expensive
Try an ultrasonic cleaner 😊