Is This INSANE Planer Upgrade Worth $1,000?

Поделиться
HTML-код
  • Опубликовано: 26 ноя 2024

Комментарии • 419

  • @731Woodworks
    @731Woodworks  Год назад +3

    ▼EXPAND FOR TOOL LINKS and INFO▼
    Watch Next: Oliver Planer with Byrd Shelix Review - ruclips.net/video/kMeNcyDqJ8Q/видео.htmlsi=hHHyXnX3_XtUF5Ec
    Pre-Installed DW735X with Byrd Shelix collabs.shop/w7wmr2
    DIY Byrd Shelix Cutter Head for DW735 amzn.to/3S53ItT
    DIY Byrd Shelix OEM Cutter Head for DW735 amzn.to/3M6YVnO
    DeWALT DW735X with standard knives amzn.to/3rZkVdE
    Fe Sharpens Fe Shirt I'm Wearing - bit.ly/3OenDUK
    NOTE: Byrd OEM vs other is the OEM is the same size as the standard knife cutterhead but you have to remove all of the helical knives to install it. The other one is 1/16" smaller, but easier to install. The only difference this will make is your scales will be slightly off.
    All tool deals for this sale (continually updated) www.731woodworks.com/tool-deals/amazonprimebigdealdays101023
    📲 Never miss another tool deal. Sign up for my Tool Deals SMS Alerts - NOTE: I text out tool deals so you don’t miss any! text DEALS to 1 (731) 207-7151 Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Important to add the word DEALS to the text!
    🇺🇸 Join the Tubafour Nation on Patreon to get an exclusive Tubafour Nation sticker, access to exclusive member-only behind-the-scenes videos, member-only livestreams, discounts, and other cool member-only perks! www.patreon.com/731woodworks
    Some other useful links:
    Daily Tool Deals on my website: www.731woodworks.com/tool-deals
    Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter
    Check out our easy-to-follow woodworking plans: www.731woodworks.com/store
    Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

    • @TheCC89
      @TheCC89 10 месяцев назад

      The numbers don't add up...
      $550 planer + $500 helical upgrade = $1,000 + or - $100/$200
      Are they seriously charging $500/$600 to install the upgraded head? While keeping the original straight blade head and charging extra for the runoff tables...? 😂
      Also, the blade change time is a little off. To change one tooth, ok, sure 30 sec, but to change all the blades on the helical will take 3 times as long as the straight. Also, finding the one chipped of 60 will take at least an HR to inspect all, unless it is just plain obvious.
      I love the helical cutter head, but I won't be spending $1,600 if I can save $500 for 2 hrs of my time.
      Also, in my experience, dirt or sand is the main culprit for lines from a chipped tooth.

  • @2smoothku
    @2smoothku Год назад +3

    Bought my 735 from a buddy who upgraded to a grizzly helical head one for $200. Replaced the straight knives with the shelix cutter myself along with the orange rubber belt and it’s been a workhorse. I also watched Next Level Carpentry’s videos for the tear down, install, and maintenance… invaluable!!
    I added a wixey digital read out and the infeed/outfeed tables and get great results on all my hardwoods.
    Only two cons is it’s loud as a mofo and the dust collection when hooked up is awful. I’ll likely cut a hole in the top, remove the shroud and add that improvement next.
    End goal is to get a hammer planer jointer and get some shop space back but that’s 6-12 months out.

  • @akquicksilver
    @akquicksilver Год назад +5

    Wow! I bought my Shelix head about 10 years ago and it was $350! One of the best upgrades I ever made to a tool. Just used it yesterday.

  • @SeanK-
    @SeanK- Год назад +10

    Great video! One thing to pass along - to measure sound levels accurately you have to measure the distance between the microphone and the thing producing sound. Anytime you double the distance from the source it drops 6db, so if one measurement were at 2.5ft vs another at 5ft, you'd expect a 6db drop for the one at 5ft. If one measurement were at 1ft and another 4ft, then it'd be a 12db difference.

  • @sociopathmercenary
    @sociopathmercenary Год назад +60

    $1000 vs $400 for the DIY install cutter head. As another person commented, seems like a no-brainer to spend the 2 hours installing the helical cutter head yourself and then you have a spare straight cutter head.

    • @mando6497
      @mando6497 Год назад +3

      Exactly, they buy the new head wholesale, probably around $250.00, with no difference in assembly cost and charge an extra $1,000.00. Good for Delta.

    • @JustinShaedo
      @JustinShaedo Год назад +1

      Yep, not a lot of us making over $300/hr

    • @curseddragon129
      @curseddragon129 Год назад

      You also have to consider the price of the planer if you go with the DIY version

    • @meta3584
      @meta3584 Год назад +1

      @@curseddragon129 he did the pre installed one is 1500. the normal planer can be found on sale for 500 regularly. so the head is 400 but is 1000 if you buy preinstalled

  • @wardmaltby2179
    @wardmaltby2179 Год назад +21

    Matt, the Amazon page shown at about 12:20 into the video shows the Byrd replacement that is 1/16 smaller that the OEM diameter. That smaller diameter cutter head will throw off the gauge. They have another version that is the same size as the OEM blades but requires you to remove all the carbide cutter heads to install. I think that is a better option.

    • @beach3408
      @beach3408 Год назад +1

      I got the smaller one. I dont use the gauge anyway.

    • @Platoface
      @Platoface Год назад +1

      That’s exactly what I did. That was like 4 years ago and was about $600 if I remember correctly

  • @1steelcobra
    @1steelcobra Год назад +12

    I'll note on the standard blades that the included t-handle driver for opening it up and changing the blades has magnets on the handle for pulling the blades out and rotating them.

  • @flatlander523
    @flatlander523 Год назад +7

    Great video!! I have done the OEM Shelix upgrade for ~ $435 to my 3 year old 735 planer. I have ran about 15 bdFt so far and I think it is wonderful; quieter, smoother. Don't go for the "other brand" that is less in diameter than the OEM to eliminate removing the knives for installation. It messes up the presets.

    • @bendavid2320
      @bendavid2320 11 месяцев назад

      I just went and looked this up and you have the right idea you can buy a brand new planer and the cutter for under 1,100 and put it in yourself. Smart guy

  • @garymiller5937
    @garymiller5937 Год назад +10

    The surface after planing is very impressive, as well as the noise reduction. I do agree though that for the casual woodworker like myself couldn't justify the extra cost. I do appreciate the review as well as all your videos. It's nice to know for sure you aren't biased but very honest. Thanks Matt and Mrs. 731! 😊😊😊😊❤❤❤

    • @731Woodworks
      @731Woodworks  Год назад

      Thank you Gary!

    • @kevinlsims7330
      @kevinlsims7330 10 месяцев назад

      The Direction You Run The Piece Into The Planer Makes A Big Dif Whether You Are Cutting Or Tearing! I Want To See The Dif Between The Power Draw From The Wall! Is It Actually Cutting Better

  • @bobh64
    @bobh64 Год назад +6

    Nice video, I installed the oem version for my DeWalt took about 3 hours after testing the alianment of the cutters. I highly recomend using a torque wrench so you don't break the carbide cutters they are brittle. After 2 years I have only had to turn 3 cutters.

  • @Ofageover50
    @Ofageover50 Год назад +2

    I upgraded my 17 year old Dewalt 735 a few weeks ago and I was amazed at how much a difference it makes in cut quality and sound level. I watched several videos before doing the swap. The one thing I didn't pay enough attention to was the belt on the small drive wheel and ate a belt in the process, but replaced it with a new one and all is good now. I've since upgraded my ridgid 6 inch jointer with the same quality cut and reduced sound.

  • @bobbray9666
    @bobbray9666 Год назад +3

    I converted a Makita 12" benchtop planer from straight knives to Shelix and the finish was similar to your results and much quieter too. Since then, I bought a Jet 12" planer/jointer with a helical head.
    One thing to note is the Shelix or any helical head should run a bit slower in RPM speed via a gear reduction vs. straight knives, at least my Jet has a much larger gear sprocket that drives the belt than the straight knife version which spins faster with a smaller diameter gear sprocket. Maybe the $1000 upgrade Dewalt planer is modified with a gear reduction? Might be worth looking into this if doing the Shelix knife replacement for a particular planer for best results.
    Shelix also uses carbide inserts vs. steel for typical straight knives, which lasts a very long time if you don't hit metal in wood.
    The smoother planed surface of a helical cutter saves a lot of time and heartburn when sanding for a finish. Definitely worth the upgrade!

  • @RogueArcher24
    @RogueArcher24 10 месяцев назад +1

    Just bought my dewalt 735, Went to flip the blade around because it was dull out of the box which was annoying but the tool that it comes with has two magnets and I realize that's for picking up the cover and the blade so you don't have to risk cutting your hand. Little fun tip

  • @AlAmantea
    @AlAmantea Год назад +4

    Great comparison, and I've used Byrd Shelix planer and joiner heads for years. It's a huge game changer, as much as actually having those tools in the shop.
    One thing I noticed though is that you said there was a 10db difference, by my math, from 108db to 88db is 20 db... That's the difference between a circular saw, and a jet airplane...
    Personally, I'll never go back to a straight knife planer or joiner.

  • @billymurphy3
    @billymurphy3 Год назад +5

    I’d suggest looking at the used market if you wanted one of these with a Shelix.
    I’ve seen some of these with a Shelix installed already for $300-500 around my parts. Definitely found them around $400. Lower $300s are the ones that pop up and disappear even with straight knives around me.
    Lots of people who install these move on to bigger planers eventually.
    Just make sure you understand there are a couple different models of the 735. Some parts for different 735s aren’t cross compatible.
    Also, you can’t be afraid of playing with your machines if this is the route you take.

    • @kwilliams2239
      @kwilliams2239 Год назад +2

      Right. I don't see where the $1000 comes from. $1600 is better spent on a floor standing planer.

  • @theriddler9963
    @theriddler9963 7 месяцев назад

    I installed my Byrd Shelix head a couple years ago and haven’t regretted it at all. You’re right, if you intend on staying with the lunchbox planer this is the way to go!

  • @Changtent
    @Changtent Год назад +26

    An interesting note about sound level is that measured decibel level is not linear to apparent sound level. In sound engineering specs, a 6-decibel increase in measured sound compares to a doubling of apparent sound level. This means if your sound is 12-decibels lower, you are experiencing 1/4th of the apparent sound level. A very significant change.

    • @adrianscarlett
      @adrianscarlett Год назад +7

      I've always understood 3db to be a doubling in intensity, 6db to be a doubling in pressure, and 10db a doubling in perceived loudness, based on the 'A' frequency weighting scale.

    • @awemowe2830
      @awemowe2830 Год назад +1

      ​@@adrianscarlettsame

    • @Andi.Mitchell.Designs
      @Andi.Mitchell.Designs Год назад +1

      12db lower will feel like half as loud.

  • @AB-nu5we
    @AB-nu5we Год назад

    I put my own Shelix head in before the plug and play option was offered. Yeah, it took about 2 hours. Your review is spot on. I don't even sand non-show faces right off the planer. Never had problems with tear out. It's worth the price in reduced sanding alone.

  • @henrybialik8333
    @henrybialik8333 Год назад +1

    I own the DW735X, Installed the OEM Shelix cutterhead. Wow, for me it was a big difference.
    I did get the head at around $400 at the time. It wasn't the easiest to install, but once it was done would never go back to straight blades.

  • @joemcdonald8516
    @joemcdonald8516 Год назад +1

    Matt, as always, I look forward to your "comparison" videos, because they are informative and well done.
    This one in particular was timely for me as I just purchased my Shelix equipped 735 planer from Byrd Tool Experts. Unfortunately, mine arrived with shattered cast base, because of apparent mishandling by a major parcel delivery service that drives brown trucks. 🤬 Byrd's customer service people were super. After ascertaining what the issue was, they told me what was involved with changing the base (very simple and straight forward, by the way), and immediately sent a new base out to me.
    After many years of using my Delta 2 blade planer, I was ready for an upgrade. I have reconciled myself to the expense of this machine, but have since fallen in love with it. I have no doubt that my son will get many years of use out of this machine after I am called home. To add to the excitement, I purchased a Wixey digital depth scale for my 735 planer. That installation was also pretty straight forward, and makes for an even nicer experience.
    If your time permit, you might want to consider demonstrating that addition for your many fans at 731 Woodworking.
    Keep up the good work!!!

    • @731Woodworks
      @731Woodworks  Год назад +1

      Great to hear about their customer service! I have the Wixey DRO in the shop and will be videoing that soon!

  • @hamilde
    @hamilde Год назад +13

    Several years ago I bought a DW735x and a shelix head. I used the blades that came with the 735 for a few jobs and nicked one of the blades almost immediately. I put the shelix head in and have planed countless board feet of wood (I think for about 5+ years). Just a couple of months ago, I rotated my first insert. I would never go back to straight knives.

    • @731Woodworks
      @731Woodworks  Год назад

      Thanks for sharing your experience with the different blades! I appreciate it!

    • @aaronoconnor606
      @aaronoconnor606 Год назад

      My 24 inch planer I have rotated the the teeth 2 times in about 20 year

    • @aaronoconnor606
      @aaronoconnor606 Год назад +1

      They are definitely worth the investment they last for ever

    • @hamilde
      @hamilde Год назад

      @@aaronoconnor606 I agree. I think I only had to rotate the one insert because I hit something metal. It only left the slightest tiny ridge and I could have left it, but why not just rotate the insert and get rid of it. I did find an old miniball bullet in some very old oak I was milling. I doubt it hurt a tooth since lead is softer than the wood.

  • @craigmonteforte1478
    @craigmonteforte1478 11 месяцев назад +1

    I’m a. retired Professional Woodworker and for my next personal Shop i set up i’m not even going to fool with the typical Lunch box or Portable Planer witha 121/2 or13” width my plan is to bite the bullet and just pick up a used Commercial thickness Planer off Ebay those machines. have the wider capacity and almost always have the Helical Cutter upgrade installed yes they are 220 volt but most home or low production shops need 220 for something and let’s face it very few of us rarely move our thickness Planers around anyway and if you. need to do so there are plenty of budget Lunchbox Planers to chose from if you need to. work with a mobile style Shop which of course will be a lower quality overall

  • @quargr
    @quargr Год назад +1

    Matt, made an earlier comment but before I clicked away another though occurred to me. Based on your review if a smother finish is being provided by the Shelix head, another advantage is you will need less sand paper (think cost) and have less ware on your sander(s), not going to mention the reduced electric and sanding time. Just saying these things one might consider in the final analysis.
    Thanks again!

    • @dwightl5863
      @dwightl5863 Год назад

      Matt did mention that less sanding would be required.

  • @gregwaters944
    @gregwaters944 10 месяцев назад +10

    You are the first person that I know of to adjust the cutter head while planning. No wonder you got tear out.

    • @731Woodworks
      @731Woodworks  10 месяцев назад +2

      🙄 I had it set too high. It wasn't cutting at all. Then I bumped it down 1/8"

  • @danbailey5503
    @danbailey5503 Год назад +1

    The WEN PL1326 15 amp planer also has that thickness gauge at the front. It also has a spiral cutter head. I am not saying the spiral head is as good as a helix, but it would be interesting to see a comparison with the WEN with these 2 dewalts. But I have the WEN and I love it.

  • @tommythompson6278
    @tommythompson6278 Год назад +1

    I have used the “w” version to plane purpleheart, hard maple, figured walnut and paduak. The only time that I had tear out was when I was aggressive with amount of material being removed. All I had to do was to back off the amount to be removed in a single pass. BTW hit does plug up the dust collector so I the small dust deputy and the problem was solved.

  • @midstaterustics4507
    @midstaterustics4507 Год назад

    I upgraded mine back during the summer and did it myself in under 2 hours. So glad I made the upgrade as it saves time all around.

  • @Aaron-nj4ou
    @Aaron-nj4ou Год назад +1

    The shelix cutterhead makes an exponential difference in noise level as you get into bigger machines. My old high school woodshop replaced the cutterhead on a 24 inch Wadkins planer and it cut the noise by probably 70 percent. It use to sound like a jet engine and now you can actually have a conversation while it is planing. For me no matter what planer you have the spiral cutterhead is worth every penny. I would not buy a new planer without it.

  • @thollin57
    @thollin57 Год назад

    I bought a WEN spiral cutter head thickness planer, and it does a particularly respectable job of planning a nice finish on all the boards I've used it on. And this got it for a fair price. This is from a weekend warrior. thanks, and have a blessed day. Just FYI.

  • @vernsteinbrecker3759
    @vernsteinbrecker3759 Год назад +2

    I’ve been thinking about changing the head in my 735, this has made me make up my mind. Thank you

  • @mwimmer8947
    @mwimmer8947 Год назад

    I don't recall you mentioning this... But if you want to keep using that handing material removal gauge... You need to order the oem size cutting head. Read the note below from Byrds website. Both blades cost the same, but one is more involved to install and maintains oem diameter. The other is super easy, but is smaller diameter.
    OEM Original Size Option: If you select the Original OEM Head Size option, you will need to remove the straight blades that come pre-installed on your head first before you can install your new cutter head. One your head is installed you can re-attach the carbide inserts to your head.
    Smaller “Easy Install” Head Option: Byrd’s default SHELIX head is 1/8” smaller in diameter to enable you to install the SHELIX head without having to remove all 40 knives. The disadvantage is that this will reduce the cutting ability by 1/16”. As this machine by default can only remove 1/8” per pass, equipped with this SHELIX head, you will only be able to remove about 1/16” per pass. Due to the fact that spiral heads require more horse power, you cannot remove more than 1/16” anyways when cutting wider stock.

  • @beach3408
    @beach3408 Год назад

    I got the Byrd shelix after about 50 board feet. I still have one side of my 4 cutters still ready to go after 11 years. Unreal upgrade

  • @deeeeeeps
    @deeeeeeps 9 месяцев назад

    I have a 15" 240v planer and done a TON of planing with a Shelix head. I'm yet to rotate the blades. Absolutely incredible how much better they are in every way...EXCEPT a stain ready finish. Everything must be sanded because they leave lines.

  • @SamWanamaker1
    @SamWanamaker1 Год назад +2

    Were the straight knives brand new as well? I feel like you mentioned you would have to flip them to get a better cut. So the comparison seems pretty unfair.

  • @jeffa847
    @jeffa847 8 месяцев назад

    I am so impressed with my Dewalt 735 even with just the straight knives. It's hard to imagine it being much better. My intention was to buy it and just use it until I had a setup that I could put a larger Powermatic (or whatever) planer in my shop but so far I haven't felt the need to upgrade. It does a beautiful job and I can get boards to such a precise thickness with the little gauge.

  • @leoisidro5476
    @leoisidro5476 5 месяцев назад

    This has been my dream planer for a while. Can't count how any videos I've watched on it already. Just not capable of pulling the trigger on it just yet. The shelix head surely takes it to another level.

  • @michaelzeal844
    @michaelzeal844 Год назад +1

    I can definitely see the benefit of the Shelix head on this, however I can't see spending this much for that planer, especially when there are options out there that are more versatile such as the Grizzly G0959 - 12" Combo Planer/Jointer with Helical Cutterhead, its a jointer and planer and is benchtop and list is under $1200

  • @erickdanielsson6710
    @erickdanielsson6710 Год назад

    Thanks Matt, I added the Byrd Helix to my Delta 22-580. Absolutely worth the time, effort and cost.

  • @jackrabbitkayaks6430
    @jackrabbitkayaks6430 Год назад +1

    Just a thought..... but I don't think you should be adjusting and lowering the planer depths while the board is already feeding. Needs to be set before feeding materials

  • @Danko88
    @Danko88 Год назад

    I got a new bird Shilex OEM for 375 on amazon , installation was super easy after watching a few videos. about 900 total for both. totally worth it after you run wood.

  • @RedEyedJedi
    @RedEyedJedi Год назад +3

    Are your straight knifes also brand new?

  • @LYTOMIZE_Woodshop
    @LYTOMIZE_Woodshop Год назад +13

    Glad to hear they make a Shelix head for the 734 which I have in my shop. I may have to have a chat with Santa!!

    • @philjohnwilliams
      @philjohnwilliams Год назад

      I have a spiral head (not Shelix, but essentially the same) in my 734 and is game changing. Noise is down and dust collection is improved, and of course the cut quality on figured wood is greatly improved

    • @frankrodriguez6424
      @frankrodriguez6424 Год назад +1

      Changing it out is a act of congress

    • @mcmathwoodworks
      @mcmathwoodworks Год назад

      Yea I didn’t know that either! I may have to look into it...

  • @MR-si1eq
    @MR-si1eq Год назад

    I just recently bought a Dewalt 735. I did do the review search thing. For the money it's ok. I get blade marks on every single piece I've ran thru it. I use a lot of walnut, maple, hickory, red oak and hickory. I'm thinking maybe i should have got the Oliver from the beginning. Not to impressed. I'd give it about a low 4 out of 5
    As for your test. Definitely get the new cutter head. It seems like your saving a lot of time and money with it in the long run. Less sanding time is a big deal when your doing large or multiple pieces. Replacement time. And so on. I'm thinking now that I'm in to this for $600 I might as well get the new cutting head. 😊

  • @kennethholmes9315
    @kennethholmes9315 Год назад +1

    Not to mention that the cutters on the shelix are carbide. Which stays sharp much longer than the high speed steel blades that come with the Dewalt machine.

  • @AxGryndr
    @AxGryndr Год назад +1

    I figured I would use up the two sides of the installed blades and then on the replacement set that came with the machine before deciding if the upgrade makes sense. The disadvantage, the price may go up between now and then.

  • @kevinrose8568
    @kevinrose8568 Год назад

    One of the best upgrades I've made. Would highly recommend for the reasons given.

  • @bobbrown2502
    @bobbrown2502 Год назад

    I have purchased 2 of the 735 planers. The first had a bolt strip out on the planer head with the first knife change. Without the support of that bolt the knife flexed and caught the framework. The planer was basically blown up. It needed a new motor base plate which costs about half the price of a new planer. I upgraded the new one to a helical head before I plugged it in. The original unit sits on a shelf in case I need spare parts. Watch out for that missing bolt.

  • @robertsmith3518
    @robertsmith3518 Год назад +1

    Nice job on the review . Very honest and pulled no punches. I like that when I watch a review . I have a 735 and the cutter head is on my Christmas list.
    Thanks !

  • @chrispanek4401
    @chrispanek4401 Год назад +2

    i dont know how much of a difference it would make but are the straight knives a brand new set?

  • @brettpeckinpaugh
    @brettpeckinpaugh Год назад +1

    If you go helical, I recommend getting a torque driver so you can properly torque them down, got one as my jointer and planer both have helical heads on them.

    • @jeffa847
      @jeffa847 8 месяцев назад

      When you say a torque driver - is that different that a torque wrench?
      Any reason why a torque wrench couldn't be used?

    • @brettpeckinpaugh
      @brettpeckinpaugh 8 месяцев назад +1

      @@jeffa847 same function but a wrench won't fit inside the body or your Planar. And instructions on most if not all torque wrenches are to not use extensions. Also the torque values are normally lower than the typical wrench. Yes they make the just most people have a 20lb/ft on up wrench.

    • @jeffa847
      @jeffa847 8 месяцев назад

      @@brettpeckinpaugh
      Thanks for the info. I have a torque wrench in inch pounds I assume would do my jointer but I guess if I get a shelix for Dewalt I might have to buy another tool.

  • @TWC6724
    @TWC6724 Год назад +1

    It’s a nice upgrade if you have the money, but in all reality, I finish hand plane my surface anyway so if you want to save money, that’s an option. I save the last 2-3 passes for ultra low depth planing so it doesn’t leave as much tear out on hardwood.

  • @johncamp7679
    @johncamp7679 Месяц назад

    There is a difference between a spiral cutter and a helix spherical cutter, the spiral blades ( hope I can make this understandable) are at 90• the spherical blades are each angled parallel, one starts cutting at the corner and works its way down the rest of the blade, the other cuts all at once.

  • @lawrencedeleurere4427
    @lawrencedeleurere4427 Год назад +2

    This comparison is between a brand new shelix and a five year old straight knife. I am sure that the shelix is better, but it's not really a fair comparison. It's obvious that your rollers on the old machine are slipping which is where those cross grain lines are coming from. I'd also be interested in seeing how new your blades are on the old machine.

  • @myslovenianhive605
    @myslovenianhive605 Месяц назад

    My upgrade took over 4 hours and had problems. It also vibrates more than the straight blades. Got very little help from Byrd. That said its a very smooth finish and I would not go back. FYI every 3Db is twice as loud.

  • @PreparationH67
    @PreparationH67 Год назад +3

    Would be interesting to see a more in depth review of something like the Grizzly G0940 and how it preforms as a planer that comes stock with a helical head. Doesn't seem like its a planer that gets talked about much.

  • @lanesynker4473
    @lanesynker4473 Год назад

    I have a shelix in my Dewalt and something they tell you is that they draw more power, especially with a wide board. Maybe they have fixed that problem on the new ones, but it has not affected me.

  • @detroitdiy
    @detroitdiy Год назад +1

    We're the straight knives new as well? If not, I would think the comparison to be unequal.

  • @actionjksn
    @actionjksn Год назад +5

    This is definitely a good upgrade. I'm mechanically inclined so there's no way I would pay the hundreds of dollars extra to have it pre installed. Two hours of tinkering around and not losing the factory warranty is totally worth the little bit of time.
    Your motor and other parts should actually last longer, since you are lowering the resistance with blades that are more efficient. I love the fact that the blades have 4 sides so you can renew it twice as many times. I bet i could successfully sharpen these things at least once with my diamond plate sharpeners.
    One thing that is really amazing is if you hit a nail or something you are only ruining maybe one or two of the little square cutters instead of a whole big piece.

    • @jimkonrad2528
      @jimkonrad2528 Год назад +2

      My understanding is the installation of the aftermarket knives voids the warranty even if installed by the owner.
      I am not 100% certain but arrived at that information when I was researching the topic last year.

    • @surlycanadian
      @surlycanadian Год назад +2

      @@jimkonrad2528correct. Dewalt does not honour any warranty if the cutter head is upgraded, regardless of who installs it.

    • @fuzzywigglebutt
      @fuzzywigglebutt Год назад +1

      @@surlycanadian Purchase the machine with straight knives, change out for the helix and if you ever need warranty work just put the old knives back in. 🙂

    • @fuzzywigglebutt
      @fuzzywigglebutt Год назад

      You would think you are lowering resistance, but I remember seeing on youtube that someone doing a test put a voltage meter to the machines and the helix head raised the voltage the machine pulled which seems to me would be more resistance. I am not very knowledgeable about that type of thing so don't really understand the theory behind the testing I saw. They were just saying the helix was harder on the motor.

    • @surlycanadian
      @surlycanadian Год назад

      @@fuzzywigglebutt that’s a great example of fraud. They very likely have some in-built mechanism that tells them if you’ve split open the panels to do anything to the assembly.

  • @rockharvey5787
    @rockharvey5787 Год назад

    Grizzly makes a helical cutterhead for this planer as well. I bought it for my 735, it was an amazing upgrade. No tear out at all, no matter the figure in the wood.

  • @bryanblissett2066
    @bryanblissett2066 7 месяцев назад

    Hi Matt, I have the Dewalt 735 and I am afraid I cannot give it a glowing report, I purchased mine in 2019 and I am chasing spare parts to rebuild the burn out motor for the second time! seems it is a common occurrence with these machines, how yours has lasted this long amazes me, I only use softwoods, and cut 1/2 mm passes, what sort of duty cycle do you use, to prevent heat buildup, as mine was destroyed when the rotor delaminated and destroyed itself. Oh yeah, if you get a chip in a blade (3 blade Unit) it is a simple matter of sliding the blades sideways as the holes are elongated so they do not line up and good for another run.

  • @JonDunnmusician
    @JonDunnmusician 3 месяца назад +1

    A high-end technician friend warned against using any helical head within a plastic low-end DeWalt planer be due to the high heat- not a great decision

  • @Mortalis2
    @Mortalis2 Год назад

    If I heard you correctly, you said you should have or did not, change the straight blades before starting this challenge? The sharpness of the blades will definitely make a difference in the noise levels and the finish in regards to the standard blades.
    The Shelix inserts are going to be sharper than the straights even if the straights were changed for new because the Shelix inserts are carbide and the standard blades are HS steel.
    The "tear out" was almost positively caused by the loose bolt unless there was a loose cracked piece when the board went through. I had one of the hold down set screws come loose in my portable power planer and oh my gosh what a mess it created in a Mahogany top I was making.
    Don't get me wrong though. I've wanted to change my Ridgid planer over to the Shelix for years but I just couldn't justify the cost with the small quantity of wood that I plane. Even at the price of just the Shelix arbor.

  • @tommysts1920
    @tommysts1920 Год назад +1

    Are the knives new in the old machine? Just bought a new knife machine and it does a beautiful job.

    • @731Woodworks
      @731Woodworks  Год назад

      They are older blades. Blades cut well. Helix cuts amazing. Basically is the gist of the comparison from me, and most anyone else who has the helical cutter heads. Not a "necessary" upgrade, just makes it better.

  • @pwrgreg007
    @pwrgreg007 Год назад

    I have not used the DeWalt DW735, but I own the Ridgid TP13002 13" Thickness Planer. It has a removal indicator at the infeed called "Ind-I-Cut", yeah that's cute. It also has preset thickness stops called "Repeat-A-Cut." I like those stops that prevent me from "over-planing" mistakes. I definitely plan to get a helical cutter, as in my experience the straight blades tear out maple & walnut regularly. If the reader has a preference between Byrd, Shelix, or Lux Cut heads, I'd appreciate hearing your thoughts.

  • @daddski1
    @daddski1 11 месяцев назад

    fantastic, i just cannot find the justification to buy over my Ridgid 13 in planer. It has been fantastic and two years into it, still works like new. Wondering though, if I can add these blades to what I have?

  • @RoscoPColtrane17
    @RoscoPColtrane17 Год назад

    Your video with the attorney about the patents involving Saw Stop earned my subscription. Brilliant that you were able not only get the attorney on, but he was into woodworking too. This video is great too, keep em coming.

  • @joewhite917
    @joewhite917 Год назад

    If you put it in your new wartented dewalt planer yourself, the warranty is also voided. If it is a non cutter head issue, keep the straight blade head and install it before turning it in for the warranty work.

  • @margueritewhite3038
    @margueritewhite3038 Год назад

    Did you change out your straight blades before testing? If they are older, obviously they could be duller thus leading to tear out. No doubt the helix is better but you can get really good results with the straight blades if they are sharp. That said, I have the 734 and have the helix cutter on my wish list!!

  • @p8ntblr1
    @p8ntblr1 Год назад

    If you have a half way decent used tool market in your area I would hold out for a floor model and get a helical head for that. Which will be the same if not less than the dewalt head. Not an option for everyone but I would check first

  • @danwaggoner1006
    @danwaggoner1006 Год назад

    I have done the self replacement. Not mechanical inclined it takes me an effort when I was younger to overhaul an engine. It was a pain to do the swap out. If I remember correctly removing and reinstalling the belt. Involved a lot of cussing and a few skinned knuckles. I do like having the Helical head and it was worth the effort but give yourself at least a half a day to do the swap.

  • @CreativeCustomDesigns
    @CreativeCustomDesigns Год назад

    The next purchase for us is an 8" jointer....it will have the helical cutter head......I might see how involved it will be in our Dewalt planer to do the exchange myself. GREAT video Matt

    • @CreativeCustomDesigns
      @CreativeCustomDesigns Год назад

      Matt....I noticed an adaptor on the back of your planer for the dust collector. Mind telling me where you got it?

  • @liamcallahan6652
    @liamcallahan6652 Год назад

    I have this planer with the Byrd Shelix and it works beautifully. But, I had a problem with the motor. As luck would have it, the planer was still under warranty. I took the planer to our local Dewalt service center. The tech at the service center told me the Byrd Shelix violated my warranty. After several days and considerable phone calls, they finally replaced the motor. But , they told me that my planer would no longer be covered by the warranty unless I put the straight blades back on the planer. It seems crazy to me.

  • @Control-Freak
    @Control-Freak Год назад

    Great Review! I think I will change out the head when I need blades replaced. Of course it doesn't get used much, I enjoy using hand planes more these days. And I don't need hearing protection for those. For really ornery wood I will break out the 735.

  • @porthose2002
    @porthose2002 Год назад

    If the user doesn't wear hearing protection, the difference in db between the two planers is the difference between hurting your hearing over time vs. not. As someone who deals with hearing loss, having the sheelix head is worth every penny

  • @matthewblumenthal804
    @matthewblumenthal804 Год назад

    I bought a Delta planer before the Dewalt was introduced. Nice planer. The Dewalt is better. I will absolutely get a helical carbide cutter head in the future. Yeah, it's expensive. In my opinion, absolutely worth the price. Oh, just an aside, the infeed/outfeed tables are more than worth having.

  • @michaelbandy2979
    @michaelbandy2979 Год назад

    Nice presentation as an engineer of 42 years I wanted to point out an improvement on your next video that includes noise measurement it is imperative that the
    menter be placed in the exact place on each device. Sound measurement is a function of the square, meaning distance from the sound source is greatly affected
    by distance. So to really compare devices distance from the source must be the same to have credibility in the numbers. Keep up the good work.

  • @freetorobandloot
    @freetorobandloot Год назад

    I installed the grizzly spiral cutterhead on mine and have been pretty happy with it.

  • @kevinlsims7330
    @kevinlsims7330 10 месяцев назад

    I Want To Know how Much POWER These New Heads Save!! I Know That The Flat Knives Will Throw The Breaker From Time To Time On White Ash! We Have Been Talking About Buying The New Type Replacement Head To Go Into Our Planer!

  • @Bobbyg2018
    @Bobbyg2018 Год назад +1

    Another great video! I would love it if you took a look at the 2 speed WEN thickness planer with the spiral cutting head.

  • @Maceofblades
    @Maceofblades Год назад

    I have a helical head on my planer and my jointer. Those cutter heads are great, and I would struggle going back to a standard cutter head. Love your content sir please keep it up! God Bless!

  • @BroRiv
    @BroRiv Год назад +1

    I know how much you don't like to sand, so hopefully this will come in handy. Enjoy my friend! 👊Oh and it's been 3 years since the Wahuda...I know...time flies..especially when you get OLDER LOL. I haven't changed a single blade on my Wahuda..they just last and last...

    • @731Woodworks
      @731Woodworks  Год назад +1

      Thanks 👍 It means more than you know! 👊

  • @DjLooN
    @DjLooN Год назад

    Right now the DeWalt is $779 the Oliver $999 so it's pretty close when you add the DIY cutter head version. So I guess it's the DeWalt robust construction and if you want to do the work vs the Oliver ready to go. The Oliver won't ship until Jan 2024 though maybe Black Friday deals might help make my decision easier.

  • @Ashitaka1110
    @Ashitaka1110 Год назад

    I know you should expect a premium for pre-assembled, but man. It was about $1,100 total when I bought the DW735X and the Lux Cut III separately a year ago and DIYed the install. It wasn't a really difficult install, either. Save yourself a bundle and do it yourself, folks.

  • @equesm
    @equesm 8 месяцев назад +1

    It’s a bit cheat. The planner gauge shows you took much more on straight knives vs helix. Could it be a difference in finishing?

  • @inspectr1949
    @inspectr1949 Год назад

    Was under the opinion that Shelix cutters require more HP as they are always in contact with the wood?

  • @1QKGLH
    @1QKGLH Год назад

    I'd like to see you compare the WEN 1326 spiral planer for less than $500 against both of these. I know, there's LOTS of youtubers that go ga-ga over the dewalt planer, but $1600 is a lot for the average joe that doesn't get half his shop paid for by sponsors, the other half paid for by patreon.
    I love the built in fan in the dewalt, and know the shelix has more cutters than the WEN, but man, my WEN does a great job.

  • @jayhitek
    @jayhitek Год назад

    I have the Rigid R4331 benchtop planer.. It also has the "Ind-I-Cut" indicator that tells you how deep of a cut the machine is going to make when you first start to put the board into the machine.

    • @JamesSmullins
      @JamesSmullins Год назад +1

      If memory serves dewalt has a bar all the way across that moves the indicator while the rest only have a small tab so you have to place the wood in the right spot for it to work.

    • @jayhitek
      @jayhitek Год назад

      @@JamesSmullins correct. The Rigid has a small ball spring lever right in the middle.

  • @mattmaxey5864
    @mattmaxey5864 Год назад

    I bought a Wen that came with the spiral cutting head. Now, I'm definitely not saying that the machine is as good as the Dewalt. The machine that the Wen replaced was an 80s model Parks planer/jointer combo machine. While the Parks machine was way more powerful, I never could get it calibrated correctly. Being more interested in woodworking than in machine calibration, I sold the Parks. At a $400 price range, I went with the Wen over the Dewalt only because I wanted a segmented cutter head planer and wasn't in a position to put out $1600.

  • @b3owu1f
    @b3owu1f Месяц назад

    So I just installed my OEM Byrd the other day. After turning it on.. I notice a sot of little rattle or like something is hitting plastic. I actually opened it up and ran it pushing the tab in myself looking down at blade and dont notice anything, no wobble, etc. But I hear the sound. I then took both sides off to see if the chain or anything was loose, off, nothing. So I am hoping this is just some new Byrd cutter noise that goes away after some use. It cut just fine.. but it bugs me that none of the videos I've seen of this have had that noise and mine does. Not sure if the bearings are messed up. Only thing else I could think of is maybe the clip pins on the left/right bearings were not seated right? I mean.. I put them in and they were not coming out.. spun the cutter and it was just fine with no noise, so not really sure wth it could be.

  • @Cactustone
    @Cactustone Год назад +1

    Great video, but I think there is a potential drawback when going to the Byrd. In my experience the Byrd has improved the quality of the surface, as you demonstrated, however it comes at a significant increase in time. My garage shop is wired for 120v at 15 amps throughout, and if I take more than a 1/32" pass the breaker will trip. Of course this always happens midway through the board, requiring adjust meant to the cutter's contact, and then super light passes to match where it left off on the breaker trip. The limitation of having to take light passes adds a tremendous amount of time to the overall milling process. Furthermore, even when taking super light passes, when this is done for extended periods of time the Dewalt's built-in fuse/breaker gets tripped, even when the shop's breaker holds stable. This is a major issue because, as stated above, the amount of time spent milling is greatly increase, which requires the planer to be run much longer. If the 15 amp limitation doesn't get you, the Dewalt's breaker will. I realize many people won't have this issue due to 20 amp capability in their shop. Maybe that will allow deeper cuts on each pass which will lessen the time spent running the planer, but I can't comment on that from personal experience. Overall, I am very happy with the Byrd, and the quality of cut is outstanding. For anyone with 15 amp limitations, be ready to spend a lot longer milling in order to enjoy the finish this cutter is capable of.

    • @moritzd3713
      @moritzd3713 Год назад

      With professional planers the helix cutters normally put less strain on the machine but are a lot more work to sevice idk why it would be diffrent with small planers, i assume the blades are just not that great in terms of quality

  • @c.a.g.1977
    @c.a.g.1977 Год назад

    Wow, that really makes a difference! Do you know if they have one for the Dewalt DW733?

  • @TonyV_in_the_OC
    @TonyV_in_the_OC Год назад

    My DW735 is about 20 years old and I've been "looking" at the Byrd Shelix for a while. Something is not working when using the affiliate link its more expensive than doing the direct search. If you get that $10, I'm good with that - you earned it and do great work. If Amazon keeps it - NO WAY. You sold it and you should get the $10!!

  • @TheDaniel85
    @TheDaniel85 Год назад

    One of the major issues with small toy/benchtop planers like this one is the small cutter head diameter. A larger cutter head will provide better results.

  • @richardhingle3634
    @richardhingle3634 Год назад

    Don't know if you will get this but I'm looking at the 10" Wahuda with helical cutters and wondered how pleased you are with your equipment?

    • @731Woodworks
      @731Woodworks  Год назад

      I did a 2 year review on mine last year, (search 731 Wahuda) It's been a great machine for me.

  • @anthonyrivera7815
    @anthonyrivera7815 8 месяцев назад

    I bought one of Byrd’s 735 with helical installed. Do you think I would be able to run an end grain cutting board through it safely? Love your videos! Thanks

  • @scottc4321
    @scottc4321 Год назад

    When doing sound testing you should try to keep the measurement at the same distance as the DB will decreases with increase distance.

  • @qwerty112311
    @qwerty112311 Год назад

    Fortuitous timing… replacement blades for me 735 arrived today… I guess dropping by Home Depot to return them tomorrow and order this sucker right now.

  • @cristianbrenes03
    @cristianbrenes03 Год назад

    could you do a comparison between Dewalt, Rigid, and Ryobi Thickness planer?

  • @jodycarter
    @jodycarter Год назад

    This is a fantastic educational video and is yet another reason to love and follow 731!!

  • @frankrossi5019
    @frankrossi5019 Месяц назад

    My first planer was a Delta that I had for 20 plus years. I wanted a Helical head planer and at the time looked a buying a Dewalt and adding a helical head. However I bought a Oilver planer that has a helical head. I am happy . But never see any reviews or comparisons?

    • @frankrossi5019
      @frankrossi5019 Месяц назад

      Sorry just found a review and comparison. I could find one when I first bought this planer 4 years ago