Is there a way to avoid tapping into a spliced OEM cable? Possibly a connector instead so I can revert back to OEM without having to repair cables in future?
Great Work !!!! Do you know which led I should buy for VW Golf Sportsvan 2016 1.6 diesel ? Are they the same as the Golf mk7 ? I bought one that is the same size as the crystal but the shower is big and does not fit the led on the door
Worked great on my 2017 mk7 gti. I used a "posi-tap" to tap into wire #16 and brown ground wire #5. I did not have to code my car and they came on with the illuminated door entrance sill plates. I didn't unplug any of the other door connectors or even the door handle. Just put a kid stool under the door panel to prop it on lol.
@@TheSeapoop on my 2017 with illuminated door sills the wire was purple with a green stripe. To be sure I suggest removing at least the 1st side door module connector you work on the determine what color wires your car uses. If you don't have illuminated sill entrance plates you probably won't have a wire in spot 16 of the connector.
@@boostedbliss07MK5 Thanks! i do have the Blue illuminated door stripe on my Mk7.5 Golf R. Will buy some posi taps and see if i can find the right wire for it and plug the brown as well :)
Cauko akurat to idem riesit u seba a chcem sa opytat vzadu si to ako riesil? Golf 7 rline. Typujem ze predok je rovnaky na oboch stranach ale co vzadu? Je to tam rovnake ako v predu?
Pozdravujem. Aj ked je to uz rok co ste pridal toto video snad nan este zareagujete. Planujem presne toto iste spravit na sharane 7N1 tak snad to bude rovnake. Len sa chcem spytat (kym to rozoberiem) kam ste zapojil minus na spolujazdcovych dverach ked tam nieje ledka alarmu?
Hello. I have a Golf 5 from 2003. On the front doors my windows regulator motors doesn't have the pins installed. On the driver side with part number 1K0959793C, only have the 19 pin. On passenger side with part number 1K0959792C, the 18 and 19 pin is not available. Is there other way to install the door warning lights without these pins?
Nazdar kamo, stym kodovanim cez vcds to mam urobit rovnako aj na passata b7? Doteraz tam boli iba udrazky a chcem tam dat ledky s projektorom, bude mi to fungovat? dik za odpoved.
@@Dxrect no man. u have to cut the rear door cables for this job (for the electicity). and lihgts will be open all the times for this type building. because of this, i didnt do it.
Ahoj , prosím Ťa dá sa to takto spraviť aj na vw touran 2016? Mám tam len odrazky ,ale rád by som tam dal led logo svetlá . Dalo by sa to spraviť aj do zadných dverí? Ďakujem. :)
Ano. Ale vtej dverovej jednotke ktorá ja na videu chýba na to pin ktorý je na to určený. Takže ak nemá auto správnu dverovu jednotku je treba natiahnut kabel do zrkadla z centralnej elektriky
Other videos have had short cables too bro. I will do this, but I'll have to zip tie it back up again too or my OCD will be raging 😂 thankyou 😊
Is there a way to avoid tapping into a spliced OEM cable? Possibly a connector instead so I can revert back to OEM without having to repair cables in future?
Sehr gute und nützliche Arbeit Vielen Dank dafür, wir hoffen, dass Sie Lehrvideos für die gleichen Themen auf Autos machen Mk5 Mk6 and Mk7
Thanks to you
Now i have door light installed
How did u code them mate
Very good and useful work Thank you for it, we hope if you make educational videos for the same subjects on cars mk5 mk6 mk7
Ahoj. Prosím te ty piny které davas do toho velkého konektoru mají nějaké označení abych si je podle toho mohl koupit?
Mají. Ale z hlavy to nevím. Koukni wirer.sk tam pán delá návody a má tam do podrobna rozpis součástek
Great Work !!!! Do you know which led I should buy for VW Golf Sportsvan 2016 1.6 diesel ?
Are they the same as the Golf mk7 ?
I bought one that is the same size as the crystal but the shower is big and does not fit the led on the door
Worked great on my 2017 mk7 gti. I used a "posi-tap" to tap into wire #16 and brown ground wire #5. I did not have to code my car and they came on with the illuminated door entrance sill plates. I didn't unplug any of the other door connectors or even the door handle. Just put a kid stool under the door panel to prop it on lol.
Awesome, gonna try this myself :) btw how do you know which is wire #16 ??
@@TheSeapoop on my 2017 with illuminated door sills the wire was purple with a green stripe. To be sure I suggest removing at least the 1st side door module connector you work on the determine what color wires your car uses. If you don't have illuminated sill entrance plates you probably won't have a wire in spot 16 of the connector.
@@boostedbliss07MK5 Thanks! i do have the Blue illuminated door stripe on my Mk7.5 Golf R. Will buy some posi taps and see if i can find the right wire for it and plug the brown as well :)
This is a very useful comment! I am going to attempt this on my MK2 Tiguan and I have the illuminated door sills. Thankyou for this.
But the sills on the door pannel are always on as it is seen by car as ambient lightning. So the exit light is also always on??
Cauko akurat to idem riesit u seba a chcem sa opytat vzadu si to ako riesil? Golf 7 rline. Typujem ze predok je rovnaky na oboch stranach ale co vzadu? Je to tam rovnake ako v predu?
Thanks so much.
I also did on golf 6, but I did not connect the wires, I inserted the minus into the free pin above and it worked
Minus pin 18 , plus pin19
hello in which pin should I close plus and minus on the rear door
Golf 6
What cable are you using? I keep getting a "no response from controller" message.
Pozdravujem. Aj ked je to uz rok co ste pridal toto video snad nan este zareagujete. Planujem presne toto iste spravit na sharane 7N1 tak snad to bude rovnake. Len sa chcem spytat (kym to rozoberiem) kam ste zapojil minus na spolujazdcovych dverach ked tam nieje ledka alarmu?
Hi, after install i receive error codes on my obd for ambient light. Is the same for you ?
Zdravím ťa máš FB alebo Instagram?mám golf 7, ľavé dverové svetlo mi svieti ale práve nie .Vieš mi poradiť ?
Hello.
I have a Golf 5 from 2003.
On the front doors my windows regulator motors doesn't have the pins installed.
On the driver side with part number 1K0959793C, only have the 19 pin.
On passenger side with part number 1K0959792C, the 18 and 19 pin is not available.
Is there other way to install the door warning lights without these pins?
Hi! Greetings from manila. Hello sir will you please make where exactly to put those wires and where to top the wire. Please
Thx the best🤗
Erm, am I wrong, but didnt you install that light in wrong??? White should be pointing down and red pointing outwards???
Tell me which Pin you have take is there any no. or sequence ?
I have also installed front and back.... Next time the back doors?
Please could you explain for rear door ?
For golf 5 the red wire on 2nd pin and brown wire on 3rd pin, then coding 0000208
How do I access that software? My golf is 2014 tsi.
Nazdar kamo, stym kodovanim cez vcds to mam urobit rovnako aj na passata b7? Doteraz tam boli iba udrazky a chcem tam dat ledky s projektorom, bude mi to fungovat? dik za odpoved.
18+. 19-. Kódovanie podobne ako golf 5,6. A aj 7
What about the rear door????
Where to you buy the lights and wire with plug
Ali
Hi, do you have video for rear door? Cuz rear door control panel its different.
Did you figure it out mate
did you do it already? how?
@@Dxrect no man. u have to cut the rear door cables for this job (for the electicity). and lihgts will be open all the times for this type building. because of this, i didnt do it.
Is it same process for rear door?
How do you do the rear doors?
He will sit on the rear sit.
Hello!! Can I have a vw touran 2016 model?
I have this errore on passenger door
B177501
Ahoj , prosím Ťa dá sa to takto spraviť aj na vw touran 2016? Mám tam len odrazky ,ale rád by som tam dal led logo svetlá . Dalo by sa to spraviť aj do zadných dverí? Ďakujem. :)
ano aj touran to má takto na 95%. aj v zadu to ide spravit. vzadu je však iný konentor a iné čísla pinov
@@golfwagen4173 Ďakujem! :)
Do light works only at night?
Hi , can you Please give me a link for that Lights on Ali . Thanks .
Did you have to buy the software for coding?
Can you use vcds lite?
Is it the same on the other side
Perfect
how do you know where should the wire go?
How are the connections for the right door. This are for the left driver door.... thanks
it's same. front doors
Tunahan Taşçi muchas gracias por tus videos
Ι have install front and rear doors.
My Next mod is mirror lights!!
how did you do for rear doors?
very good ;-))
You dont need to remove the door 😂😂 you can just unclip all clips and leave the window side in.
What pin is ambient light
Do you really need to code the lights? Dose it works without coding it?
Need coding, 99./. always
Positap them in job done
Can you please make a video about how to wire Ambient door light please
Damn. He has to make his car like laboratory rat/frogs for testing.
How long we need kabel ?
Kannst mir sagen, wie ich hinten anschließe
From where did you buy the led lights?
Ali
I bought it from Autoteile Richter.
Pin 16? Or
5 is com (-) for red alarm led on the door
English is very bad
Trampo feio
je mozne instalovat vonk. svetielko aj na spatna zrkadla ?
Ano. Ale vtej dverovej jednotke ktorá ja na videu chýba na to pin ktorý je na to určený. Takže ak nemá auto správnu dverovu jednotku je treba natiahnut kabel do zrkadla z centralnej elektriky
@@golfwagen4173 co to znamena z centralnej elektriky ?