My uncle just gave me an "02" blaster he ran it without oil and seized the engine do you know where I can get a new engine can't seem to find one anywhere?
10/40W engine oil for motorcycles (not cars as dry clutch). Any decent qualtiy 2 stroke oil for the motor. Change the box oil on a regular basis, if it smokes excessively that could be down to a crank seal
I recently had a problem with the tors in my blaster. I did all that I was told to do for that and at first I throught, hell yeah, it started right up, but it only took me about thirty feet before dying again. Can you help me figure this problem out please?
Just got a 2005 blaster big bore kit and some other stuff rode fine till I was in 4th gear riding up my street and it bogged out tires locked up and stalled and the kickstart was stuck. Got it home kickstart worked again but wouldn't kick over tried pop starting it and it ran but did not sound good it stalled again and has been locked up ever since. Any idea what it could be ? I think motor is seized up
the motor probably did lock up. there was probably a massive air leak causing it lean out. i would leak down test the motor before tearing into it so you can see exactly what needs to be replaced and gone over. i also have a video showing a leak down test on a blaster engine
Glad I stumbled across these vids I got a blaster too now 😅
120 psi is not low for a blaster. Anything between 110 and 120 is good.
Can you make a video for how to connect all the cables for start the yamaha blaster please
Thanks for the video!
Bro I just got that same blaster yesterday I'm looking at it now
I just found a blaster for 400 might get it lol
You should do a engine swap with a blaster and put a gsxr 750 engine in it
My uncle just gave me an "02" blaster he ran it without oil and seized the engine do you know where I can get a new engine can't seem to find one anywhere?
Any recommendations for new shocks
I don't know much about these but I heard you need transmission oil and engine oil but I don't know what kind
10/40W engine oil for motorcycles (not cars as dry clutch). Any decent qualtiy 2 stroke oil for the motor. Change the box oil on a regular basis, if it smokes excessively that could be down to a crank seal
120 psi…. A little low????? Mine tan with 80 and then it quit working entirely before I rebuilt it
Can't get the two big bolts out any help?!?!??!
basically need to use a hammer if they wont come out. Place the nuts back on the bolt to prevent damage to the threads
What oil do I use on the engine of a blaster?
The Outlaws 2cycle
I recently had a problem with the tors in my blaster. I did all that I was told to do for that and at first I throught, hell yeah, it started right up, but it only took me about thirty feet before dying again. Can you help me figure this problem out please?
Im having the same problem
Just got a 2005 blaster big bore kit and some other stuff rode fine till I was in 4th gear riding up my street and it bogged out tires locked up and stalled and the kickstart was stuck. Got it home kickstart worked again but wouldn't kick over tried pop starting it and it ran but did not sound good it stalled again and has been locked up ever since. Any idea what it could be ? I think motor is seized up
the motor probably did lock up. there was probably a massive air leak causing it lean out. i would leak down test the motor before tearing into it so you can see exactly what needs to be replaced and gone over. i also have a video showing a leak down test on a blaster engine
Grinding Gears Garage alright thanks man I'll peep the video never done a leak down test
cameron finley it’s not hard, just be sure to take your time
Same thing happend to my blaster should I just change the top end or what?
I have a 2003 blaster with disk rear breaks hydraulic can u make a video showing how to change the pads??? and the rear axel bearings? ?
Jacob bailey I just got one of those for free needs a new engine and new break pads break fluid and the works
Can u put a Yamaha yz250 in the blaster
Michael Crank did u ever find out if u can?
I'm having engine case problems..can you help
like?
what color are ignition coil wires
I want to see 300ex videos!!!!
They are coming!!!! We have been wanting to get started on it but have to clear some space
i have a new blaster.. the last build year. it has a ignition key and lights etc.. does this make a difference?
just a few more wires to disconnect. the engines are basically the same throughout the years