@@BrattyBiker the cable will bend more on this doom and eventually will break on the last model doom it has a perfect gap to fit becoz it's made for the last model round meters of rx
Too expensive solution for a small problem. If you have a battery drain issue, simply start by inspecting the wiring and make sure it is not shorting or damaged anywhere, if it is, either fix it by soldering and properly insulating. Another thing is remove any accessories from the system, like foglamps, phone chargers.etc and then try replacing the RR unit, you don't need to spend too much on old stock OE. The new Nippon ones are working great! Hope it helps :) I am also interested on the Allied kit but I currently don't have the budget for it.
Very nice 👍 Bro after seeing your front disc Installation video... I have I installed in my rx100..that really works well... My. Next project is to install fuel meter on rx 100.. Mostly Old pulser fuel meter and Guage... Please guide regarding that.... Here in you tube there is no images sharing.. I will Share you on I instagram.. Send you in stagram I'd.. Thanx love from pune..
Thank you. I would suggest against installing a fuel gauge on RX This is because the tank has to be cut for the modifications to be done as you have to install the fuel float which will send level data to the fuel meter. The issue is that when tank is cut and wielded back, it loses its anti-rust protection and it cannot be coated again, because of the fuel level float. This will cause rusting issues and that rust will clog up the fuel filter and carburettor leading to starting and running trouble. The best way, is to use the main and reserve method. Ride happily when the fuel switch is at main, once it hits reserve, start searching for a fuel station and refill back up. Simple, effective and costs nothing.
Old E-1 Block, but resleeved. Old factory sleeve was removed, all the ports were cleaned up & modded to be close to RX-King spec. I'm using an IZUMI Standard size piston, I have made a video using this exact same block : ruclips.net/video/AX6r60oxNeM/видео.html
In the near-future, yes! I have got the last-gen 135's lockset which has the center-locking ability. But I am also thinking of reverting to an RXZ's setup as I have a feeling that this could hinder the FC process (2023). But will be using this setup for the time being.
That's an adorable machine.. You have..... >>>
Thanks :)
Great bro... U explained very nice
Thanks :)
Hope it was helpful!
Super bro
Thank you :)
Stay tuned for the next part!
Excited for part 2 👍
Thanks ☺️
how do I know ?? I killed two of em.😂
like the commitment to DIY 👍
Haha thanks, Unfortunately that is the price I paid to have learnt that lesson, and I'd certainly want my viewers to avoid the mistakes I did ☺️
👌
Thanks :)
Awesome ❤️
Thanks :)
Hii bro can we get same type speedometer
Waiting for 2nd part🔥
Thank you, it's coming soon!
@@BrattyBiker send u r number bro
@@panthammanikantanaidu3370 Sorry, I cannot share my number here. You can eMail me : brattybiker123@gmail.com
Use rx135 last model headlight cup for the speedo cable this doom cup will break the speedo cable
Thank you! Why would this one break the speedo cable ?
@@BrattyBiker the cable will bend more on this doom and eventually will break on the last model doom it has a perfect gap to fit becoz it's made for the last model round meters of rx
Thanks for the info! I shall certainly try and source it. For now, the cable looks fine but I guess its better I get it changed.
If speedo cable is not working drill a hole right below and take the speedo cable from inside
Thanks for the tip, but the speedo is working fine.
How about going for the allied electronic kit to solve the battery drain issue ?
Too expensive solution for a small problem. If you have a battery drain issue, simply start by inspecting the wiring and make sure it is not shorting or damaged anywhere, if it is, either fix it by soldering and properly insulating. Another thing is remove any accessories from the system, like foglamps, phone chargers.etc and then try replacing the RR unit, you don't need to spend too much on old stock OE. The new Nippon ones are working great!
Hope it helps :)
I am also interested on the Allied kit but I currently don't have the budget for it.
Very nice 👍
Bro after seeing your front disc Installation video... I have I installed in my rx100..that really works well...
My. Next project is to install fuel meter on rx 100.. Mostly Old pulser fuel meter and Guage... Please guide regarding that.... Here in you tube there is no images sharing.. I will Share you on I instagram.. Send you in stagram I'd.. Thanx love from pune..
Thank you. I would suggest against installing a fuel gauge on RX
This is because the tank has to be cut for the modifications to be done as you have to install the fuel float which will send level data to the fuel meter. The issue is that when tank is cut and wielded back, it loses its anti-rust protection and it cannot be coated again, because of the fuel level float. This will cause rusting issues and that rust will clog up the fuel filter and carburettor leading to starting and running trouble.
The best way, is to use the main and reserve method. Ride happily when the fuel switch is at main, once it hits reserve, start searching for a fuel station and refill back up. Simple, effective and costs nothing.
Rx100, Rx135; and uniqe raw power of Rxg, technical difference and performance wise vedio please🙏
A lot of them are already available. I don't think I can add anything new on that.
Can u give details about ur headlight,does it have a ring light
Stock headlight. You get either MINDA or FIEM make RX headlight these days. No, doesn't have a DRL ring.
1 question sir ur RxG has new block? Or boared Or sleeve, or have sleeve with bore on standard piston sir?
Old E-1 Block, but resleeved. Old factory sleeve was removed, all the ports were cleaned up & modded to be close to RX-King spec. I'm using an IZUMI Standard size piston, I have made a video using this exact same block : ruclips.net/video/AX6r60oxNeM/видео.html
Are you going to convert it into central locking as well ?
I'm planning to on my rx100 , because of fear from theft as the old handle locks are pretty much useless
In the near-future, yes! I have got the last-gen 135's lockset which has the center-locking ability. But I am also thinking of reverting to an RXZ's setup as I have a feeling that this could hinder the FC process (2023). But will be using this setup for the time being.
Which speedo cable u're using
I'm using the Pulsar's analog speedo cable (old type, not digital) as I have a front disc setup of the Pulsar.
@@BrattyBiker ok, thanx bro