Wow your set up sounds great. Which do you prefer the 20 watt plexi or the JCM800? Also, in your other video you mentioned that the amps can get too bright. Is that an equal problem for both or is one better on that issue?
For about 12 - 15 bucks for the parts you can just make an effects loop volume control similar to jhs little black amp box.. a couple of input jacks and a audio taper pot and an enclosure, some solder and u have a nice little project and a new toy built by you!
Most of my musician buddies won’t even adjust their own truss rods let alone build something. I can’t tell you how many times I’ve had to fix a jack on their instruments with just a socket wrench.
Great vid, you have a very toneful setup there, nice sounding Les Paul, amp/cab and pedal board, nice playing and note choice. I loved the '80's too ( You can take the kid out of the '80's, but you can't take the '80's out of the kid)
Great video! Am I right to assume that all the time based effects were added in the efx loop as well before returning to the power stage of the dimed Plexi - and that the volume turned down in the loop also keeps the time based efx 'clean' and not being over driven at the power stage?
Trying my TC again my chain: TC front - insert out (loops SD1,TS9,L6M5) - to amp input - I'm not using the fx loop on my Origin 50 ....running a line out captor 8 to TC insert return - TC stereo out to HB poweramp 2 PA speakers for a W/D/W rig
Very useful and informative video. I would only say keep the reverb off for the crunch and overdrive settings for rhythm. Always seems to kill the tightness of a marshall. Otherwise sounds great.
I usually have reverb on the recording so it’s not so stale. Might have over done it. And sometimes I use it to cover up the gate closing. I have bad power so I have a healthy hum to cover up. But for the most part I agree.
Please it is possible to make a Van Halen 1 sounding Video with the Marshall studio vintage head? Thst would be great!! Thanks sooo much! Chri!👏👏👏🤟🤟⚡🤟💪
Yes. I have a SV20H and I just put a JHS Black Box in the fx loop and use it as a master. Does it degrade the tone? Maybe some will say yes but I don't think so. Go for it!
It can but I have it setup just to control the filter/ wah. It’s a Ernie ball volume pedal. It’s not ideal for a wah control because all the action happens after the halfway position-toe down. I’ve compensated for this by shifting the Mid point in the g system up to around 80%. So basically 0-80% movement of the pedal equals roughly 0-50% sweep in the wah sound.
Well that’s kind of the by product of having it bedroom volume. I guess you can use a power soak but for my style of music I don’t want power tube distortion. That means I’ve lost all headroom for lead volume boost.
Very creative setup! That's what we need more, flexible and functional tones!
Wow your set up sounds great. Which do you prefer the 20 watt plexi or the JCM800? Also, in your other video you mentioned that the amps can get too bright. Is that an equal problem for both or is one better on that issue?
Nice playing dude! Very musical🌞
Always learn something new from your videos, keep it going!
i want to hear more Slash and GNR on that studio 20 please! I am thinking of getting the sc20 jcm 800 head but i am not sure yet.
That sounds massive. I have the sc20c combo but this sv sounds glorious I
Great way to make the SV20 more usable at home. Great sound and playing man, love it!
I use my line 6 Hx fx. Same way. I drop a volume pedal into one of the blocks and use that to control my overall output. It works great.
For about 12 - 15 bucks for the parts you can just make an effects loop volume control similar to jhs little black amp box.. a couple of input jacks and a audio taper pot and an enclosure, some solder and u have a nice little project and a new toy built by you!
Most of my musician buddies won’t even adjust their own truss rods let alone build something. I can’t tell you how many times I’ve had to fix a jack on their instruments with just a socket wrench.
Great vid, you have a very toneful setup there, nice sounding Les Paul, amp/cab and pedal board, nice playing and note choice. I loved the '80's too ( You can take the kid out of the '80's, but you can't take the '80's out of the kid)
Great jam session! Thanks for the ride 👍🤟
Awesome video, I just bought a 1987x and yeah it’s stupidly loud. Hopefully this little hack helps to bring the volume down👍
GThe guy's name Johan Segeborn, dude. Keep rockin'!
Great sound! Awesome guitar playing!! Good for Van Halen 1 sound???
Great video! Am I right to assume that all the time based effects were added in the efx loop as well before returning to the power stage of the dimed Plexi - and that the volume turned down in the loop also keeps the time based efx 'clean' and not being over driven at the power stage?
You are correct.
Trying my TC again my chain: TC front - insert out (loops SD1,TS9,L6M5) - to amp input - I'm not using the fx loop on my Origin 50 ....running a line out captor 8 to TC insert return - TC stereo out to HB poweramp 2 PA speakers for a W/D/W rig
Dude, you are a hell of a player! Great!
Very useful and informative video. I would only say keep the reverb off for the crunch and overdrive settings for rhythm. Always seems to kill the tightness of a marshall. Otherwise sounds great.
I usually have reverb on the recording so it’s not so stale. Might have over done it. And sometimes I use it to cover up the gate closing. I have bad power so I have a healthy hum to cover up. But for the most part I agree.
Incubus...Sevendust...from your preset names I assume you like nu metal =)
Great video!
I like it all the way up!
So what db level was that? Like 95-100ish?
Please it is possible to make a Van Halen 1 sounding Video with the Marshall studio vintage head?
Thst would be great!!
Thanks sooo much!
Chri!👏👏👏🤟🤟⚡🤟💪
Just got a g system.
This only works when the amp has an effects loop right?
I want to do this with a non effects loop plexi style amp
@@guskalogeros9021 it can be used in front of any amp just like traditional pedals.
works good!
I use one of those cheap attenuators to tame the volume but if you want bedroom levels it does such the treble out.
You have to run it a bit loud.
En loop 1 qu'est ce que tu as mis ?
So can I just plug a volume pedal into the fx send return?
Yes. I have a SV20H and I just put a JHS Black Box in the fx loop and use it as a master. Does it degrade the tone? Maybe some will say yes but I don't think so. Go for it!
Is that expression pedal also working as volume pedal.? What brand is it
Tx
It can but I have it setup just to control the filter/ wah. It’s a Ernie ball volume pedal. It’s not ideal for a wah control because all the action happens after the halfway position-toe down. I’ve compensated for this by shifting the Mid point in the g system up to around 80%. So basically 0-80% movement of the pedal equals roughly 0-50% sweep in the wah sound.
sounds good, but there's no power amp distortion :/
Well that’s kind of the by product of having it bedroom volume. I guess you can use a power soak but for my style of music I don’t want power tube distortion. That means I’ve lost all headroom for lead volume boost.
@@bhosterman still sound great! I imagin the sd-1 and the compressor makes a big diference...
What song is that @ 13:33?
Lay it down by Ratt.
@@bhosterman thanks, great video
Oh boy...
Fuukkk!!