If you want to use high rate battery to increase it's torque (power) for crush hard pieces, so yes it's power will increase at a certain limit. Bcoz if battery have potential to supply high amount of amps to motor winding then it's torque and RPM will definitely increase at a certain limit.
@@hackstech is it harmfull to windings of motor tocrush hard pieces and feeding needed amps??have you any advice to upgrade it like changing motor to 555 or high rate like 10 or 25c battery??
Yes it's harmful for motors winding and may cause burn of winding and also damage of it's blades during crush hard pieces, that why I suggest you to use some other powerful blender for crushing hard pieces.
@@mrsameen2130 There can be two reasons for this. First is that either you blend something heavy 🪨 than it's load capacity or second case is due to it's battery problem.
@@hackstech i chargeed it for 2-3 times for 2 hrs still not working. Planning to change it today but they gave no guarantee( it was display product so)wll try to change thy have another one they had pink colour it had less power but if thy dnt want exchange will repair it like ur video
My juicer wouldn't work when there's fruit inside even when i turn it upside down..and even without fruit on its own it take time before it turns on after multiple clicks
Can I make it more powerful so it can blend pieces of nuts etc? Right now it can blend smoothies containing soft material like oats or bananas etc. But I want to be able to blend smoothies containing pieces of nuts and dates. What will I need to do? Please guide. Thanks
You need to use external six cells battery pack and give this power to motor directly without it's circuitry then connect a on/off switch between a wire coming from battery to motor.
Here note that for this system you remove blender circuitry because when load of motor increase so this circuit automatically stop power supplying so you also need to remove this circuit and use it as only for battery charging, not for on/off blender motor.
It's due to a battery problem because when you start it's battery current decreasing due to load and battery can't handle this so its circuit automatically cut-off.
Check the following: 1. Batteries connected in parallel 2. Correct positive and negative points on pcb 3. Good batteries 4. Check if the pcb is getting hot or very very hot while charging
no no no. It's not series. Watch the video carefully, the battery is connected in parallel. It increases the battery capacity/ mah. But not increase the volt.
Change its battery cells because It comes with a pre-used battery cells. and increase quantity of cells So it will run longer because it consume more power than it's battery capacity
you can use silicone for extra support otherwise dc motor is already fixed in cage and not slip down because of the support of cells which is enough for it.
If you want to run it directly so you need DC power of rating (3.7volts to 5volts) with at least 5 Amps and connect the output of the supply directly with motor wires
This motor is operate on 3.7volts to 5volts DC if you connect it directly with plug so it will explode because because it can't run on 220/120 volts AC
Is it good to use high rate battery to have more power on device to crush hard pieces or its not going to change anything bcoz of weak motor????
If you want to use high rate battery to increase it's torque (power) for crush hard pieces, so yes it's power will increase at a certain limit. Bcoz if battery have potential to supply high amount of amps to motor winding then it's torque and RPM will definitely increase at a certain limit.
@@hackstech is it harmfull to windings of motor tocrush hard pieces and feeding needed amps??have you any advice to upgrade it like changing motor to 555 or high rate like 10 or 25c battery??
Yes it's harmful for motors winding and may cause burn of winding and also damage of it's blades during crush hard pieces, that why I suggest you to use some other powerful blender for crushing hard pieces.
Interesting ❤
Can we use any usb wire to charge it.. bcz i lost it's usb wire .
Yes you can use.
Can you tell me the address of your shop ? Sir ????
chargable juicer hy button press krty he red light on ho jati hy or machine on nhi hoti..charging b full hy.kya reason ho skti hy
I did not know when I own the blender I needed to add two batteries to it even when it's charged. What a rip off😢
Where can I buy the batteries online ?
You can buy it easily from Amazon.
Pls I bought d blender yesterday any time I try to blend it will spin for some sec and stop showing red light
It will show a red light then It will stop blending
@@mrsameen2130 There can be two reasons for this. First is that either you blend something heavy 🪨 than it's load capacity or second case is due to it's battery problem.
Hlo iski motor kaha s milegi
It's custom designed, you can repair it if it's damaged.
So is the Battery Cheaper Than A New Blender?
yes it is less than 1/6 of blander price.
Batery to sahi hai direct chalane pr chal jaati hai but butan se nahi chal rahi hai. Kya problem ho sakti hai
Button dabane par koi light on hote hai?
I bought this yesterday and red light indicating but not working what's thr problem
If you want to run so please double click on button. but still if it's not working so charge it at least 1 hour.
@@hackstech i chargeed it for 2-3 times for 2 hrs still not working. Planning to change it today but they gave no guarantee( it was display product so)wll try to change thy have another one they had pink colour it had less power but if thy dnt want exchange will repair it like ur video
So you need to replace it's battery 🔋
Thanks
My juicer wouldn't work when there's fruit inside even when i turn it upside down..and even without fruit on its own it take time before it turns on after multiple clicks
You have to cut fruits into very small pieces but if it does not turn on even without fruits easily so you have to change it's battery, cells.
Can I make it more powerful so it can blend pieces of nuts etc? Right now it can blend smoothies containing soft material like oats or bananas etc. But I want to be able to blend smoothies containing pieces of nuts and dates. What will I need to do? Please guide. Thanks
You need to use external six cells battery pack and give this power to motor directly without it's circuitry then connect a on/off switch between a wire coming from battery to motor.
Here note that for this system you remove blender circuitry because when load of motor increase so this circuit automatically stop power supplying so you also need to remove this circuit and use it as only for battery charging, not for on/off blender motor.
Blender fully charged a it makes one sound when press to start , then nothing.
It's due to a battery problem because when you start it's battery current decreasing due to load and battery can't handle this so its circuit automatically cut-off.
I have charged mine but it's stuck on the blue light. What does this mean?
The battery is full does it change color?
@@eustusngari3269 No, just stuck on the blue light then shuts off after 5 mins.
Check the following:
1. Batteries connected in parallel
2. Correct positive and negative points on pcb
3. Good batteries
4. Check if the pcb is getting hot or very very hot while charging
@@eustusngari3269 Ok thanks I will try that
Ok👍👌🏻👌🏻👌🏻😀😀 ✌
My blender won't charge, why? Can it be repaired?
If its light is on during so you need to replace battery only but if it's light is not on so you need to change charging control circuitry.
@@hackstech Yes, there is no light, I will change the charging circuit, thanks 🙆
Much better you connect a battery in series, so it can add up volts and give more power in motor.. and use dc step up to charge a battery..
no no no. It's not series. Watch the video carefully, the battery is connected in parallel. It increases the battery capacity/ mah. But not increase the volt.
Button se light on horhi ha Lkn chal ni rha wht does it mean
1 ghante Battery charge Karke try Karen. Nahi chale to phir battery change Karne Hoge.
Pls I bought this blender few days a go I charged it but when trying you use it runs out of power in 3 minutes what do I do
Change its battery cells because It comes with a pre-used battery cells. and increase quantity of cells So it will run longer because it consume more power than it's battery capacity
@@hackstech very good 👍 👌 👏
Lala its dc motor is loosed now
Silicon must use for motor around
you can use silicone for extra support otherwise dc motor is already fixed in cage and not slip down because of the support of cells which is enough for it.
Bhai yeh battery cell kaha se milega
Where did you purchase the replacement cells?
Amazon.
@@hackstech can you provide the link please?
@@sweetsoundsasmr4119 www.amazon.co.uk/dp/B083JYTY5V/ref=cm_sw_r_awdo_M55ZPDTY9BS7DTQ3JH22_0
@@hackstech thank you 😊
hello dear thanks for ur video
but possible i make that mixer work with Adapter AC to DC power
no need battery?
Comment changer moteur , j'arrive pas a l'enlever .
Can i connect moter wire too direct in plug 🔌
How much volts in moter
If you want to run it directly so you need DC power of rating (3.7volts to 5volts) with at least 5 Amps and connect the output of the supply directly with motor wires
This motor is operate on 3.7volts to 5volts DC if you connect it directly with plug so it will explode because because it can't run on 220/120 volts AC
Plz bhai isko direct current pr chalaane ka tarika btao matlab hm ise normal 5 volt k phone charger se direct chala le battery ki zarurat na pare
When connected to charge only red light is blinking. What to do sir?
Red led blinking or only glow continuous without blinking?
@@hackstech it was due to loose connection. Now it's working. Anyway thankyou ☺️
@@hackstech what happens if it is just continuing to b red not blinking