My new routine is watching your scrap videos before bed. This world is so crazy and life is so go go go. It’s nice to slow way down, watch a good scrap out, see what you find, see the change in value and end it with a prayer. Jesus is my old friend, scrap it all is my new one! Sorry about your thumb 👍🏼 but thanks for not swearin. What a great example you set. Time for bed. G’nite!
I absolutely love watching you break things down piece by piece. That’s where I get lazy sometimes. It’s nice to know EXACTLY how much you can get from stuff I may not fully breakdown incase it’s completely worth it and I’m missing out!
You should never think that we would get bored watching you scrap things out. If I didn't have my own stuff to scrap, I could seriously watch you all day! Keep up the good work! ❤🙂👍
These videos have been a great way to spend time i got sick in August and have had 3 major surgeries. im on the road to recovery now, but it will be a long road to recovery, so i appreciate your videos
Just got in from scrapping 6 huge sealed condenser motors (from commercial rooftop units) and came in for a break to see you had a new video. I wasn`t sure if I was watching a show about scrapping or antique tools...LOL !! When in doubt when it comes to taking things apart ,brute force and ignorance is the answer. I smashed my thumb yesterday morning before work while punching out copper bundles from a large stator ,so I feel your pain. I did although do a whole lot of cussing unlike yourself ,so good for you . Thanks for another fine video ,and know how much joy you bring to all of us for taking the time to do so. Hoping you are feeling better James and keep up the great work. Sincerely yours Paul T from Canada.
Oh wow, hope you got a lot of copper from them. Ouch, hope your thumb is ok? It does happen, but dang, does it hurt right afterwards 😂 Thank you, Paul, I appreciate your support and have a wonderful weekend.
@@paulcoenen7918 I`m getting just over 5 pounds of copper from the big compressor units and I have two even bigger ones stashed at work. I`ll use the forklift for those instead of killing my back cause I`m an old man (63 LOL) .Got to figure out how to get them off my truck and into the back yard.
I am almost done pulling apart 2 motel ac/heating units (one per room) a friend gave me for free from his motel , breaking down everything except for wire ends tossing them in a jar even pulling the aluminum off the copper in all 4 radiators and stripping every piece of wire and cutting off solder copper to separate clean copper and dirty , though copper is down to like $2.60 American in Virginia but gotta finish cutting apart the last compressor for the copper wire and stuff inside them
Praying your thumb will stop throbbing. Thank you for going the distance on taking the saw apart. The preschool scrapper will love this. He’s always wanting to “yook inside” tools. This will last him a few days of good before school video. Still praying for you hope you continue to still feel better.
@@jwall6006 thank you! My thumb is feeling way better and overall I’m feeling great, thank you for the prayers. That’s great, when I was a kid I loved seeing what was inside things, I guess as an adult I still do lol. Have a great weekend and God bless you.
Hope your thumb is ok, I KNOW THAT HURT!!!! I had a boss when I worked at the railroad in the late '70's used to say " If you didn't bleed today, you didn't do anything today!" Thanks and GOD bless you!
@@wadechadwick4323 well then I guess most days I’m useless 🤣🤣 Yeah it hurt so badly, but it’s way better now. Thank you brother and God bless your weekend.
First, I pray for your thumb 👍 What a good video. I liked that the first 3 were simple, but then the circular saw. It was a challenge and like you said, it made you have to think. ❤
@@KPaul7 hey brother, how are you doing? You’re still in my prayers. Thank you, I appreciate that. My thumb feels great actually. I definitely do like a good challenge.
@scrapitall200 I'm okay, still the same situation. My hope and prayers are that everything will work out in the eyes of God. He can change anything and weigh on the heart. Thank you for asking. How are you? You are in my prayers as well.
@@KPaul7 All things work together for good for those that love the Lord. I just encourage you to remember that God sees the final picture and we are very limited to what we can see and know. I will keep praying for you brother. I am doing well, thank you and thank you very much for keeping me in your prayers.
Again, another nice breakdown. I really appreciate the breakdown of prices between shred, and what the actual money that can be made out of it is. I've actually watch the video of all 4 tools. And got the time on each one of them, so you can see how much you're making per hour taking things apart. Next I saw blue paint on that circular saw, which is the color I use to mark my tools when I was in the business. I hope that's not one of my saws😂😂😂 With it in your thumb, I've done the same thing. Taking the steel, Out of the aluminum casting spindle on A riding lawn mower. Dec. I commend you. On not using any foul words after you hit your thumb. I myself could say I could not do that. Not that hitting your thumb is funny, but the funny part is. You got the bearing out, but now you gotta pick your thumb out where the bearing was😮.😂 Also I tried to send you a picture of Spinning work table. the other day. But I probably didn't do it right?Just curious if you got it🤠
Thank you my friend! I don’t think that was your saw, but I can send it to you. Some assembly required 😂 I was happy at least the bearing was out 😂 I didn’t receive an email from you, I even check my spam folder. Check to make sure you got my email address entered in correctly (I’m sure you did) just not sure why I didn’t receive it.
@@scrapitall200 I probably messed it up. I'm not really computer literate. I was a carpenter for 42 years. I can build you anything out of wood. I don't seem to understand when I had a crew. I could either tell them or yell at them to do something when I tell her yell at the computer.It doesn't do anything🤔🫣🤠
@@fraudanator2249 yeah I’m the same as you, I really don’t know much about computers, just enough to get myself in trouble 🤣 Well my friend, you have skills that are really important. I worked in construction for many years, let’s just say I’m better with computers 🤣 Now cars, I can work and fix cars, oh and I can scrap things really well. lol.
Very interesting video brother.👍👍 Don't remember ever scrapping tools.🤔🤔Great shots of the tear downs of the tools. Thanks for sharing. God bless brother.😎😎⛏⛏🔥🔥
That worm saw was a very fine and expensive tool back in its day. The blade looks like they may have been cutting tile or some sort of masonry with it shame to see it go but I’m sure it’s worked hard and earned a rest. I scrapped out a circular saw last winter they are extremely tough you show a lot of patience and persistence. Wow😮that brass gear is sweet very high quality. Maybe get a blister on your little finger maybe get a blister on your thumb😊 I took a very serious laceration to my left wrist a few years back and it severed most of the nerves over there so I don’t get a lot of pain when I smash digits on that side I do not advise trying it though not worth. Love your videos buddy appreciate that you keep everything very neat and tidy and try to dismantle everything as humanely as possible,thanks for posting.
@@noneyabeeswax3200 yeah I believe you’re right, looks like it worked hard for many years. Yeah, I kind of want to keep that brass gear, just not sure why lol. Oh my goodness, that sounds awful! 😢 Thank you for watching, I greatly appreciate it. Have a wonderful weekend!
Love tearing stuff apart like you do buddy make a little more off your stuff! It all adds up! Och! I hate when I do that buddy hope your thumb is okay my friend! Another. Awesome video my friend hope you have a great weekend!
@@scrapitall200 can imagine! Last week I salvaged an old "pigeon clock" I found at a secondhand store for 1.5 euro. It had so much nice brass as well haha will just save it forever haha
Whenever I have pins or broken screws that that are threaded in, I put it in the chuck of my drill and spin it out. Hope your thumb is OK. I'm constantly hitting my hand where I had surgery. Another great video as always.
Awesome video. You make the videos so entertaining. Sorry about your thumb and so glad to hear you are doing better. I have a pile of electric tools to do also. Thanks for sharing
Ouch! I guess those impact gloves are in order now. I have scrapped a few of those power tools and most go in the bin, but I do the cast circular saws when I see them. I don't like all the grease, but they seem worth it.
I appreciate that you take the time for us. It will be great when you get to the 100k subscriber mark and this starts to really pay. If we keep doing Likes on your vids, you'll get there.
My thumb is doing great, thank you. I’ve been gone up in the mountains, but as of right now where I am I think it’s your birthday (8th) Hope you had a great birthday and I pray this year will be filled with so much joy, peace, love and happiness.
That was a great profit! I have a few things i need to do videos on but just cant seem to pick myself up out of the muck long enough to do anything. Hated to see ya smack your thumb, that smarts to much. I probably wouldn't have kept that part lol. But another all together great video Brother. Keep doin what your doin !
I'm not Christian or religious but I love your prayers, speaking with love and unity on a planet made by "god" is a lovely message that should be honoured and passed on to new generations. What's so wrong with love and devotion?
Thank you brother! Yeah it feels way better now. Me too, I might keep the gear, but I’m not sure why lol. Just want you to know, I’ve been thinking about you all day and you’re in my prayers.
@scrapitall200 thank you brother, you know how much I appreciate you. Been a tough day. Some are better than others but it's just taking it day by day. I'll get there.
@@williammiller6043 I appreciate the useful tip. I used to work in construction and had that said to me a few times early on 😂 I just find it more comfortable this way, honestly. Thanks again.
First, the circular saw is a worm drive circular saw. They have gear oil in a gearbox. That nut you had trouble with is the fill port. Second I would suggest getting a 3/4 oak dowel rod for driving out bearings. Hope your thumb is getting better, I have hit mine several times like that, take care my brother.
@@scrapitall200 I seen that, but I have trouble with my eyes. That's why I suggested the wood dowel as you can cut it longer than a punch. I have been using those wooden dowels for about 8 years now and I love it. My hammer doesn't slip as long as I make a center contact.
@@GeorgiaDogScrapper I have short ones and long ones. What happened was, I had that piece of aluminum sitting on top of that ring and when the bearing let loose, the hammer followed and my thumb was up against that ring cause I had my fingers clinched when I should’ve had them extended out. Was just a simple accident, they happen to us all.
Brother hammer and thumb don't mix 😮 and wormdrive saws always have oil in the gear box just so you know this was a very enjoyable video please take care thank you for sharing this six stars brother
@@scrapitall200 when things like that happen I always think about playing catch with my Gramps when I was in my teens and he nailed me right in the eyes with a fast ball ⚾️ lights out 😵 when I woke all he said was I told you not to take your eye off the ball. Then handed me my glove and told me to get up and try again 😂 that’s parenting I tell ya! I love my Gramps second best man I know!
I hope you are well I will be going to church soon. Hope you are ok miss your videos, a bunch were missing yesterday from other people and saw one just vanish this morning, wonder what is happening I see the day soon where we will have no internet just gangs from venezuela with guns,Jesus bless and protect you.
I am doing great. Just spent a bunch of time in the mountains with a bunch of other Christians, it was such a good time. That’s so awesome, I hope you had a great time. Thank you so much. I will have a new video out this next Saturday.
@@empirefinds right! lol. I think most of us can relate to that pain. I sell my shred steel, aluminum and stainless steel every month or so, but I’ve been stacking up my copper and brass for about two years now. I’m in no rush to sell my good metals. You too brother. Stay safe and blessed.
I love these comparison videos. I have to ask, since this is a 40 minute video. How long did it actually take you to break all these down for the $11? Was it worth your time in the end? I always struggle with that. I spent about 2 hours breaking down a front load washer yesterday as it had a stainless tub. I was teaching my 15yo son about scrapping and tools and such, so I counted it as time well spent, but not sure in the end if I was by myself if it would have been worth it. Together, the washer weighed 240lbs
I don’t really pay attention to my time so I don’t really know. For me it’s always worth it cause I love being out in my shop and I have so much fun scrapping. Thank you for watching.
@@Joseph-s5k7n that is very illegal (my yard will NOT buy burned copper) and it’s really bad for the environment. I will never teach that on my channel. Thank you for watching.
Hey Scrapitall. Just leaving this comment to let you know to not bludgeon yourself with a knife when stripping copper wire. It’ll save you a trip to the ER with 3 stitches and 2 pints of blood on your floor👍. Didn’t hit an artery thankfully
R u ok buddy, I have done that a couple times, I did have nail going thru my hand playing around a nail gun I know the feeling and the pain every body says hi all here in Sanford, North Carolina 😸❤️🇺🇸🇸🇻🌎🐭
Wow that oil was an unpleasant hiccup but it all cleaned up nicely...sorry you whacked your thumb, hopefully you won't get the black spot on your fingernail. Take care my friend, until your next video!
@@Virginianative1968 it seems to be doing quite well. I broke that thumb years ago and I think that’s why it initially hurt so badly. Thank you my friend and enjoy the long weekend!
@@ofthewoods137 because of the price I get for that insulated wire. I did a test a month ago or so and I was surprised with the results. My yard buys all insulated wire as #2 where as some yards consider it low grade which carries a lower price.
@@KyleLittle-nd9yb definitely and scrap prices are actually down right now, so it could easily be worth more if prices would go up again. Thank you for watching.
@@fishingmaster99 the hvac company might even do it for a fee, but I believe the Freon can be reused, so the fees might not be much. But again, I don’t know since I don’t ever get much stuff like that so I just don’t have the experience.
I’m a hobby scrapper so I don’t pay attention to the time. With the way I record my videos I have no idea how much time. As far as electricity used, it’s extremely minimal. I can be inside watching tv burning electricity or out in my shop making money. Thank you for watching.
@@dart336 I don’t have the space for one! Plus most scrappers like myself (hobby scrappers) won’t have one either and I like to show how to do things without all the fancy tools so anyone can do it.
@@scrapitall200 I wouldn't call a cheap analog tool fancy. It's pretty much a reverse tire jack. I don't have the "space either" but until we can secure the patio homeless theives I'm putting it off. It's not that big and it increases the amount of stuff you can collect
@@scrapitall200 it's not dishonest. They buy it fully assembled from you with no problem. After you take the copper out put it back together. They sell it overseas, where they recover the steel. And they have buyers for the plastic. So it all gets recycled. And doesn't go into landfill to rot.
@@magthemagnificent8437 my scrapyard does not want plastic if I can easily remove the metal from the plastic. So in the case of this drill, since I took it all apart. If I put steel back inside, screwed it back together, they wouldn’t appreciate that.
hey scrapitall when you use your phone to record a long video that's not a short do you have it on the long side touching the ground just making sure I don't make a long video that's not like a short
![Twenty One Pilots - “The Line” (from Arcane Season 2) [Official Music Video]](http://i.ytimg.com/vi/E2Rj2gQAyPA/mqdefault.jpg)
Thank you for watching.
Have a safe and wonderful weekend!
I sure miss yah Brother! I’m going to try and get a video or something up soon 😅
Great video ♻️👍🏻
@@BushDogScrapper thank you for watching!
My new routine is watching your scrap videos before bed. This world is so crazy and life is so go go go. It’s nice to slow way down, watch a good scrap out, see what you find, see the change in value and end it with a prayer. Jesus is my old friend, scrap it all is my new one! Sorry about your thumb 👍🏼 but thanks for not swearin. What a great example you set. Time for bed. G’nite!
@@claytonschemper8375 thank you so much.
What a GREAT friend He is 😁
Have a great rest my brother in Christ!
I absolutely love watching you break things down piece by piece. That’s where I get lazy sometimes. It’s nice to know EXACTLY how much you can get from stuff I may not fully breakdown incase it’s completely worth it and I’m missing out!
@@MikeDoesStuff101 awesome, thank you my friend.
I enjoy scrapping everything down to the bare bones.
You should never think that we would get bored watching you scrap things out. If I didn't have my own stuff to scrap, I could seriously watch you all day! Keep up the good work! ❤🙂👍
@@Wreck-Gar thank you for your kind encouraging words!
Have a wonderful week and thank you for your support.
These videos have been a great way to spend time i got sick in August and have had 3 major surgeries. im on the road to recovery now, but it will be a long road to recovery, so i appreciate your videos
Oh wow, I hope and pray that you will recover quickly. Thank you so much, I’m happy my videos are helpful and enjoyable to you.
Your video's help me focus a lot with ADHD as a 40y/o. Selfemployed, but need relaxingtime and this helps SO much. Thanks pal! Wish you all the best.
Awesome, I’m so happy my videos are so helpful. I have a lot of fun making them and I always appreciate reading words like you wrote. Thank you.
Keep making your videos I’d watch scrap videos all day
Awesome! 😃
I do love making videos so thank you.
Just got in from scrapping 6 huge sealed condenser motors (from commercial rooftop units) and came in for a break to see you had a new video. I wasn`t sure if I was watching a show about scrapping or antique tools...LOL !! When in doubt when it comes to taking things apart ,brute force and ignorance is the answer. I smashed my thumb yesterday morning before work while punching out copper bundles from a large stator ,so I feel your pain. I did although do a whole lot of cussing unlike yourself ,so good for you . Thanks for another fine video ,and know how much joy you bring to all of us for taking the time to do so. Hoping you are feeling better James and keep up the great work. Sincerely yours Paul T from Canada.
Oh wow, hope you got a lot of copper from them.
Ouch, hope your thumb is ok? It does happen, but dang, does it hurt right afterwards 😂
Thank you, Paul, I appreciate your support and have a wonderful weekend.
Curious, what's the copper yield on one of those?😊
@@paulcoenen7918 I`m getting just over 5 pounds of copper from the big compressor units and I have two even bigger ones stashed at work. I`ll use the forklift for those instead of killing my back cause I`m an old man (63 LOL) .Got to figure out how to get them off my truck and into the back yard.
I am almost done pulling apart 2 motel ac/heating units (one per room) a friend gave me for free from his motel , breaking down everything except for wire ends tossing them in a jar even pulling the aluminum off the copper in all 4 radiators and stripping every piece of wire and cutting off solder copper to separate clean copper and dirty , though copper is down to like $2.60 American in Virginia but gotta finish cutting apart the last compressor for the copper wire and stuff inside them
@@bloodydemonwolff very cool! Getting the max amount of value from it, I can appreciate that!
I really enjoy learning. Thank you for sharing. God Bless You!
Awesome!
God bless you too.
I enjoy scrapping God bless.
@@richardroyles1423 that’s awesome! It sure is a lot of fun.
God bless you too 😁
Not boring at all. Very fascinating 😊thx!
Thank you so much! 😊
Your amazing human bro, thanks for the laugh 😃 lol God bless you, brother ....I knew it was gonna happend...
👍 yeah I can’t say I’m surprised I whacked it 😂
Thank you and God bless you too brother.
Thanks for giving us the break down. As shredded as a posed to tearing it down..😅
You’re welcome!
Thank you for watching.
good video! def worth taking them apart if you have the time!!! glad your feeling better!!!!
@@DumpsterMarcus thank you!
I agree, it’s definitely worth for me who enjoys hobby scrapping.
I am, thank you so much.
Have a great week.
Good video. Keep them coming.
Thank you so much!
Neat video as always! It is alot of fun taking things apart. Glad your doing better prayer does work brother 🙏!
Thank you my friend!
Absolutely and thank you for praying.
Praying your thumb will stop throbbing. Thank you for going the distance on taking the saw apart. The preschool scrapper will love this. He’s always wanting to “yook inside” tools. This will last him a few days of good before school video. Still praying for you hope you continue to still feel better.
@@jwall6006 thank you!
My thumb is feeling way better and overall I’m feeling great, thank you for the prayers.
That’s great, when I was a kid I loved seeing what was inside things, I guess as an adult I still do lol.
Have a great weekend and God bless you.
Great video buddy! Always better to break down if you have the time to do so
Thank you! I completely agree.
Nice job buddy on random goodies. Ouch thumb 👍 / worm drive skill saw awesome.
Thank you my friend.
Ouch is right 😆
You smashed your thumb and not a swear word out of you! Thumbs up... no pun intended
I do like the pun 🤣
Been in my garage all afternoon scrapping things and watching this- a good day. Thanks for posting your video I always learn something new 😀
Sounds like a great day! 😁
Thank you for watching, I appreciate it.
Happy scrapping to you.
Hey SiA! Great video as always. Best wishes for your thumb get well, mate! See you next week have a good time!
@@saschakonze6867 hey there my friend, hope you’re doing well!
Thank you, it actually is doing really well.
Have a wonderful week.
Other than the thumb hit this has to be one of my favorite vids of yours. I do enjoy it.
@@poormansstack thank you so much.
Yeah my thumb did not enjoy this 😂
Hope your thumb is ok, I KNOW THAT HURT!!!! I had a boss when I worked at the railroad in the late '70's used to say " If you didn't bleed today, you didn't do anything today!" Thanks and GOD bless you!
@@wadechadwick4323 well then I guess most days I’m useless 🤣🤣
Yeah it hurt so badly, but it’s way better now.
Thank you brother and God bless your weekend.
First, I pray for your thumb 👍
What a good video. I liked that the first 3 were simple, but then the circular saw. It was a challenge and like you said, it made you have to think. ❤
@@KPaul7 hey brother, how are you doing? You’re still in my prayers.
Thank you, I appreciate that. My thumb feels great actually.
I definitely do like a good challenge.
@scrapitall200 I'm okay, still the same situation. My hope and prayers are that everything will work out in the eyes of God. He can change anything and weigh on the heart. Thank you for asking.
How are you?
You are in my prayers as well.
@@KPaul7 All things work together for good for those that love the Lord.
I just encourage you to remember that God sees the final picture and we are very limited to what we can see and know.
I will keep praying for you brother.
I am doing well, thank you and thank you very much for keeping me in your prayers.
I was helping my brother on a roof years ago and I missed the nail. Same thumb as yours so I know the pain.💥
Ouch! That’s a universal pain. No matter who you are or where in the world, we can all relate to that pain lol
Excellent video 👍👍👍🙏
Thank you so much
Oh yes I know that feeling when hammer connects with thumb 👍🏻 🔨💥🤬😂😂😂 thanks for the video 😃
It’s a special kind of pain 😂
Again, another nice breakdown. I really appreciate the breakdown of prices between shred, and what the actual money that can be made out of it is. I've actually watch the video of all 4 tools. And got the time on each one of them, so you can see how much you're making per hour taking things apart. Next I saw blue paint on that circular saw, which is the color I use to mark my tools when I was in the business. I hope that's not one of my saws😂😂😂 With it in your thumb, I've done the same thing. Taking the steel, Out of the aluminum casting spindle on A riding lawn mower. Dec. I commend you. On not using any foul words after you hit your thumb. I myself could say I could not do that. Not that hitting your thumb is funny, but the funny part is. You got the bearing out, but now you gotta pick your thumb out where the bearing was😮.😂 Also I tried to send you a picture of Spinning work table. the other day. But I probably didn't do it right?Just curious if you got it🤠
Thank you my friend!
I don’t think that was your saw, but I can send it to you. Some assembly required 😂
I was happy at least the bearing was out 😂
I didn’t receive an email from you, I even check my spam folder.
Check to make sure you got my email address entered in correctly (I’m sure you did) just not sure why I didn’t receive it.
@@scrapitall200 I probably messed it up. I'm not really computer literate. I was a carpenter for 42 years. I can build you anything out of wood. I don't seem to understand when I had a crew. I could either tell them or yell at them to do something when I tell her yell at the computer.It doesn't do anything🤔🫣🤠
@@fraudanator2249 yeah I’m the same as you, I really don’t know much about computers, just enough to get myself in trouble 🤣
Well my friend, you have skills that are really important. I worked in construction for many years, let’s just say I’m better with computers 🤣
Now cars, I can work and fix cars, oh and I can scrap things really well. lol.
@@scrapitall200 I just tried to send you some pictures👍🤠
@@fraudanator2249 I’ll go check
Very interesting video brother.👍👍 Don't remember ever scrapping tools.🤔🤔Great shots of the tear downs of the tools. Thanks for sharing. God bless brother.😎😎⛏⛏🔥🔥
@@CandSMINING they are quite fun in my opinion.
God bless you too brother.
Good one
Thanks.
Great video as always James! I like scrapping tools. Sometimes small things are more fun that the bigger things. God bless 🙏🏻
Thank you my friend!
God bless you too.
Great video!
@@luciencloutier3035 thank you so much!
That worm saw was a very fine and expensive tool back in its day. The blade looks like they may have been cutting tile or some sort of masonry with it shame to see it go but I’m sure it’s worked hard and earned a rest. I scrapped out a circular saw last winter they are extremely tough you show a lot of patience and persistence. Wow😮that brass gear is sweet very high quality. Maybe get a blister on your little finger maybe get a blister on your thumb😊 I took a very serious laceration to my left wrist a few years back and it severed most of the nerves over there so I don’t get a lot of pain when I smash digits on that side I do not advise trying it though not worth. Love your videos buddy appreciate that you keep everything very neat and tidy and try to dismantle everything as humanely as possible,thanks for posting.
@@noneyabeeswax3200 yeah I believe you’re right, looks like it worked hard for many years.
Yeah, I kind of want to keep that brass gear, just not sure why lol.
Oh my goodness, that sounds awful! 😢
Thank you for watching, I greatly appreciate it.
Have a wonderful weekend!
Love tearing stuff apart like you do buddy make a little more off your stuff! It all adds up! Och! I hate when I do that buddy hope your thumb is okay my friend! Another. Awesome video my friend hope you have a great weekend!
It’s much better now, thank you buddy!
You too my friend!
Thank you for always watching my videos. 😊
That is why I wear one of my heavy welding glove. Still hurts but no as bad. A couple of times I went down on my knees with pain.
@@daleleeman9916 that’s a good idea, thank you.
It’ll make the toughest person drop to their knees sometimes.
Thank you for watching.
👍👍👍👏❤
Good job and interesting video.
Greetings from Germany
Thank you!
Greetings from the USA
In love with that brass gear! haha (hope my wife's not watching as well ;) )
@@Stinow it’s really cool. I’m pretty sure I’m going to keep it and not scrap it. 😁
@@scrapitall200 can imagine! Last week I salvaged an old "pigeon clock" I found at a secondhand store for 1.5 euro. It had so much nice brass as well haha will just save it forever haha
Great video my friend
@@bigcountryscrapper6885 thank you
Whenever I have pins or broken screws that that are threaded in, I put it in the chuck of my drill and spin it out. Hope your thumb is OK. I'm constantly hitting my hand where I had surgery. Another great video as always.
Cool idea!
Yeah it feels way better today. I’ve actually broken that thumb which is why I think it hurt so dang much 😂
@scrapitall200 I cut my index finger with my angle grinder which required surgery, and I'm constantly hitting it with the hammer or on a door frame.
@@Kreacher1974 ouch! That sounds awful
You Work With such tedious manner. get5 it all, it's fun
Thank you!
I agree, it’s a lot of fun.
Awesome video. You make the videos so entertaining. Sorry about your thumb and so glad to hear you are doing better. I have a pile of electric tools to do also. Thanks for sharing
@@scrapnjunk81 thank you so much!
Yeah I’m definitely feeling better, thank you for the prayers.
@@scrapitall200 your welcome. We need to always pray for each other
Absolutely! Feels like it’s more important than ever!
@@scrapitall200 oh yes the enemy is working overtime because he knows his time is short and Jesus wins
Amen! I was just thinking today about that very thing, Jesus has already won! Hallelujah
Another great video brother
I do pray your thumb is ok.
Thank you brother!
Yeah it’s feeling much better.
@@scrapitall200 good I’m glad it is
😁
Ouch! I guess those impact gloves are in order now. I have scrapped a few of those power tools and most go in the bin, but I do the cast circular saws when I see them. I don't like all the grease, but they seem worth it.
I’m waiting for Ace to come out with them lol.
Yeah the grease can be a turn off, but you know me, I scrap it all 🤣
Thank you buddy.
@@scrapitall200 Someone has to scrap it all. 😄
😂
I’m happy to be that guy
I appreciate that you take the time for us. It will be great when you get to the 100k subscriber mark and this starts to really pay. If we keep doing Likes on your vids, you'll get there.
Thank you, I appreciate that.
That would be awesome if one day I could reach 100k. It is one of my goals.
I used to micro srcap tools. Pain in the ear to get the armature apart. I say cut the cord sell the tool as shred. But its up to you.
It’s really easy to scrap them, not sure if you watched the entire video or not.
I like scrapping power tools but you make it look very easy with good tools . Thankyou Scrapitall.Scoreee, Sha Bam
@@PhilRichards-o4h the right tools definitely help. I like scrapping them too.
Thank you for watching bud!
nice 🙂
Thank you.
You could use brake kleen for the grease
I will be throwing all my power tools except for the extension cords in shred
@@ScrappingwithGrandpa 👍
Oh James, ouchie!!! I felt that one, how is your thumb today? 🙈 Lovely brass cog from that one though at least! 😬
My thumb is doing great, thank you. I’ve been gone up in the mountains, but as of right now where I am I think it’s your birthday (8th) Hope you had a great birthday and I pray this year will be filled with so much joy, peace, love and happiness.
That was a great profit! I have a few things i need to do videos on but just cant seem to pick myself up out of the muck long enough to do anything. Hated to see ya smack your thumb, that smarts to much. I probably wouldn't have kept that part lol. But another all together great video Brother. Keep doin what your doin !
@@scrappingonthefly77 man that hurt so much 😂
Thanks brother, I appreciate it.
I think that the saw is a worm drive, that may be why it had oil instead of grease. Sorry about the thumb. Thanks for sharing!
I believe you’re correct. Thank you, that hurt so badly.
I like these longer videos 👍. I thought the rule was bigger hammer?
Oh good, thank you for sharing that.
I think you are right. I need to invest in a few other hammers.
Thank you my friend for all of your support.
I'm not Christian or religious but I love your prayers, speaking with love and unity on a planet made by "god" is a lovely message that should be honoured and passed on to new generations. What's so wrong with love and devotion?
Oh, I love how you break down the potential gains and you speak from your heart 🤘
That’s great. I am definitely speaking from a place of love and this world needs more true love.
Thank you so much for watching and for your comment 😃
The saw blade maybe has some use also, nice video
Yeah that appeared to be in decent shape.
Thank you!
I’m stripping it down all the way. ✌️
Awesome my friend! 😃
Hey Y'all ✌️ 18:13😂
Hey y’all lol
👋
@@piecesofpete5921 👋👋
@@piecesofpete5921 👋
@@ThatsRightRecycling 👋👋
Amen
God bless!
Great video brother. Love the brass gear. Hope your thumb is ok. Looked like a proper whack.
Thank you brother!
Yeah it feels way better now.
Me too, I might keep the gear, but I’m not sure why lol.
Just want you to know, I’ve been thinking about you all day and you’re in my prayers.
@scrapitall200 thank you brother, you know how much I appreciate you. Been a tough day. Some are better than others but it's just taking it day by day. I'll get there.
I bet 😢
If you need anything, you just let me know. I’m here for you in any way, brother.
@scrapitall200 thank you, it means the world to have friends like you, looking out. Still blessed 🙌
I feel honored to be such a good friend with you, I truly do! 😊
Hold your hammer at the end of the handle. That's what the handle is there for. You'll get better leverage and apply more force to your swing. Try it.
@@williammiller6043 I appreciate the useful tip. I used to work in construction and had that said to me a few times early on 😂
I just find it more comfortable this way, honestly. Thanks again.
First, the circular saw is a worm drive circular saw. They have gear oil in a gearbox. That nut you had trouble with is the fill port. Second I would suggest getting a 3/4 oak dowel rod for driving out bearings. Hope your thumb is getting better, I have hit mine several times like that, take care my brother.
@@GeorgiaDogScrapper the punch I used works perfectly, I just wasn’t holding it properly
@@scrapitall200 I seen that, but I have trouble with my eyes. That's why I suggested the wood dowel as you can cut it longer than a punch. I have been using those wooden dowels for about 8 years now and I love it. My hammer doesn't slip as long as I make a center contact.
@@GeorgiaDogScrapper I have short ones and long ones. What happened was, I had that piece of aluminum sitting on top of that ring and when the bearing let loose, the hammer followed and my thumb was up against that ring cause I had my fingers clinched when I should’ve had them extended out. Was just a simple accident, they happen to us all.
Second!🎉
Woohoo! First Canadian though 👍✌️
Brother hammer and thumb don't mix 😮 and wormdrive saws always have oil in the gear box just so you know this was a very enjoyable video please take care thank you for sharing this six stars brother
My thumb agrees with you 🤣
Thank you brother and enjoy the long holiday weekend.
Oh I felt that smack to the thumb 😬
@@BushDogScrapper that hurt like none other 🤣
It feels way better now.
@@scrapitall200 watch yo thumbs 😅
@@BushDogScrapper for real 🤣🤣
@@scrapitall200 when things like that happen I always think about playing catch with my Gramps when I was in my teens and he nailed me right in the eyes with a fast ball ⚾️ lights out 😵 when I woke all he said was I told you not to take your eye off the ball. Then handed me my glove and told me to get up and try again 😂 that’s parenting I tell ya! I love my Gramps second best man I know!
@@BushDogScrapper well he was right 🤣🤣
The older generation had their special way of teaching us. My grandpa was an amazing man as well.
good old Powertool
Definitely!
Thank you for watching
I hope you are well I will be going to church soon. Hope you are ok miss your videos, a bunch were missing yesterday from other people and saw one just vanish this morning, wonder what is happening I see the day soon where we will have no internet just gangs from venezuela with guns,Jesus bless and protect you.
I am doing great. Just spent a bunch of time in the mountains with a bunch of other Christians, it was such a good time.
That’s so awesome, I hope you had a great time.
Thank you so much. I will have a new video out this next Saturday.
I felt that pain many times brother. Awesome episode do you take the stuff in to the scrapyard or just stack it. Stay safe regards from England
@@empirefinds right! lol. I think most of us can relate to that pain.
I sell my shred steel, aluminum and stainless steel every month or so, but I’ve been stacking up my copper and brass for about two years now. I’m in no rush to sell my good metals.
You too brother. Stay safe and blessed.
I love these comparison videos. I have to ask, since this is a 40 minute video. How long did it actually take you to break all these down for the $11? Was it worth your time in the end? I always struggle with that. I spent about 2 hours breaking down a front load washer yesterday as it had a stainless tub. I was teaching my 15yo son about scrapping and tools and such, so I counted it as time well spent, but not sure in the end if I was by myself if it would have been worth it. Together, the washer weighed 240lbs
I don’t really pay attention to my time so I don’t really know. For me it’s always worth it cause I love being out in my shop and I have so much fun scrapping.
Thank you for watching.
What brand are your red handled diagonal cutters, they look like a good size, can you share the make/model. Great videos!
They are Doyle brand and I highly recommend them.
Thank you for watching, I appreciate it
Thanks, your channel is great
@@gearheadglen you’re welcome!
Thank you so much.
Hope your thumb is ok. Best of luck
Much better now, thank you.
nice increased your money five-fold
Heck yeah buddy!
Easy way scrap electrical motor stator's is put in burn pile, then copper comes off them easy
@@Joseph-s5k7n that is very illegal (my yard will NOT buy burned copper) and it’s really bad for the environment. I will never teach that on my channel.
Thank you for watching.
Hey Scrapitall. Just leaving this comment to let you know to not bludgeon yourself with a knife when stripping copper wire. It’ll save you a trip to the ER with 3 stitches and 2 pints of blood on your floor👍. Didn’t hit an artery thankfully
Dang buddy, that’s awful. Hopefully you’ll heal up quickly!
🧊🧊🧊🧊here some ice for your thumb, many of us here no the feeling.
@@scott-kf1bi thanks buddy. Definitely, it’s a universal experience lol
R u ok buddy, I have done that a couple times, I did have nail going thru my hand playing around a nail gun I know the feeling and the pain every body says hi all here in Sanford, North Carolina 😸❤️🇺🇸🇸🇻🌎🐭
Yeah it feels way better now, thank you.
Ouch, that would really hurt.
Hello from the west coast my friend.
Oil for the worm drive
I guess I just never really thought about it, obviously 😂since I was surprised by the oil. Thank you!
Some of the stuff you call garbage is recyclable plastic, so I hope you put it in the recycling bin!!
@@markinator8826 that’s not recyclable where I live at all! I always recycle everything possible.
😎👍👍👍❤️
Thank you my friend.
I have never had a skillsaw with oil
@@nicejunk666 yeah, always been grease from my experience. Hope Greta doesn’t see this 🤣
@@scrapitall200 😂
@@nicejunk666 😂
Wow that oil was an unpleasant hiccup but it all cleaned up nicely...sorry you whacked your thumb, hopefully you won't get the black spot on your fingernail. Take care my friend, until your next video!
@@Virginianative1968 it seems to be doing quite well. I broke that thumb years ago and I think that’s why it initially hurt so badly.
Thank you my friend and enjoy the long weekend!
I could feel the pain from here. I hope it's okay.
@@adey88splace it’s feeling much better, thank you.
Ouch I been there
I actually thought of you when I did this. I’m glad I caught it on camera 🤣
Boy did it hurt though.
@@scrapitall200 I’m always getting hurt safety 3rd
@@nicejunk666 😂🤣
You could have stripped the insulation off of the electric cords too.
@@ofthewoods137 no I’d actually lose money by doing that
@@scrapitall200 why, because of the time versus the price?
@@ofthewoods137 because of the price I get for that insulated wire.
I did a test a month ago or so and I was surprised with the results.
My yard buys all insulated wire as #2 where as some yards consider it low grade which carries a lower price.
It appears that the copper alone was worth the same or more than the total shred price. Everything else was gravy
@@KyleLittle-nd9yb definitely and scrap prices are actually down right now, so it could easily be worth more if prices would go up again.
Thank you for watching.
I would have rather fixed the tools up since thats very easy to do with these old school powertools so they can be used again at least.
@@alouisschafer7212 too each their own. I have way more fun scrapping them.
Hello so i have 6 ac units and do not know where to get the freon out? Any clue?
Hello! That is a great question and I don’t know honestly. Maybe contact an HVAC company and maybe they can lead you in the right direction.
@@scrapitall200 ok thanks i have a pile that atill got it in them and dont wanna release it into the air
@@fishingmaster99 the hvac company might even do it for a fee, but I believe the Freon can be reused, so the fees might not be much. But again, I don’t know since I don’t ever get much stuff like that so I just don’t have the experience.
G day James Interesting video. Do u live around airport, sounds like alot of planes
Ths
@@donvoll2580 no, there’s just a lot of private airplanes and they all like to fly low 😂
@@scrapitall200 Ths
Time is money too. How long your electricity n bill
I’m a hobby scrapper so I don’t pay attention to the time. With the way I record my videos I have no idea how much time. As far as electricity used, it’s extremely minimal. I can be inside watching tv burning electricity or out in my shop making money. Thank you for watching.
Harbor Freight had a 20% coupon for ITC members, just buy a press already and save your hands. If you're not already one, borrow a friend who is.
@@dart336 I don’t have the space for one! Plus most scrappers like myself (hobby scrappers) won’t have one either and I like to show how to do things without all the fancy tools so anyone can do it.
@@scrapitall200 I wouldn't call a cheap analog tool fancy. It's pretty much a reverse tire jack. I don't have the "space either" but until we can secure the patio homeless theives I'm putting it off. It's not that big and it increases the amount of stuff you can collect
They definitely are very very handy to have.
Dang thieves ruin everything 😡
You can get paid for the plastic , if you put it back together with the little bits of steel back in it.
That’s dishonest and I’d never do that.
@@scrapitall200 it's not dishonest. They buy it fully assembled from you with no problem. After you take the copper out put it back together. They sell it overseas, where they recover the steel. And they have buyers for the plastic. So it all gets recycled. And doesn't go into landfill to rot.
@@magthemagnificent8437 my scrapyard does not want plastic if I can easily remove the metal from the plastic. So in the case of this drill, since I took it all apart. If I put steel back inside, screwed it back together, they wouldn’t appreciate that.
Scrapping is not without it's hazards it would seem! Hope the thumb is ok.
It’s feeling much better, thank you.
Sorry to see the dumb thumb trick, I recon I felt it.
Right? That is a universal pain we all can relate to.
Hello sir I watched your videos
Whats the price of scrap electric motors
Thank you. The prices vary depending on the scrapyards. the average price in the USA Today for electric motors is 24 cents per pound.
Thanks bro
just got back
Welcome back
hey scrapitall when you use your phone to record a long video that's not a short do you have it on the long side touching the ground just making sure I don't make a long video that's not like a short
@@smitchlego long form phone sideways.
@@scrapitall200 got it just making sure
Snap ring
Thank you
Most scrappers are going to cut the cords off regardless.
I know it’s just easier doing it this way
My yard will motor price for them hole still
That’s awesome.
Why not pull copper from electric motors
I do pull the copper from the motors.
Scrapitall Thumbsmasher :-) I Pray your thumb isn't too badly hurt, in Jesus Name I Pray, AMEN!!
@@markinator8826 thumbsmasher 😂 I love it
Thank you, I appreciate the prayers.
God bless you