say bro , you got an instagram or snapchat or something so i can dm you and ask about this install ? im having an issue , but so far its been very helpful until i confused myself .
Bro this was a big help I seen other videos talking about how the passenger side is that hardest part to uninstall and how they used some special tool to fit in the tight spot to loosen and tighten it, that pushed me away and not want try but you made it look easy ! So now I feel like I can do it !
Mine sounded like that when I only had the AMS intakes but once I got the lower downpipe and ecutek ams tune, the sound went away. It sounds NA thought it does backfire/pop occasionally (not popcorn pops with multiple pops). I even added hks bovs and I don't even hear that on revs, only on wot pulls when I let off. Seems odd that everyone has different sounds. My datalogs shoe that everything is fine too. No leaks or anything.
Good installation guide.. With THAT said... Intake "upgrade" on the Q is a waste of $. The stock intake system is already as good as it gets. So youre either blowing a lot of $ on the look under the hood, or a slightly different sound. There's little to no benefit for buying aftermarket intake for this vehicle. This is just a bit of info toward those who are thinking about buying an intake for their Q.
Stock tune correct but if you have ams intakes and are tuned there are some gains in low and high end with these intakes . Not saying every intake only ams ,stillens are actually bad for the car
I pulled off the little snap in zip ties that mount the wires to the car.. just keep trying bro you’ll get it. Put some gloves on and try again. Take a break and get back at it
Pull those clips out that I was referring to @ 3:55 in the video .. this will give you more space to work with And it will be easier to disconnect the mass air flow sensor.
Without the covers , it sounds beast.. i can hear it loud and clear while I drive.. and the car runs perfectly fine without a tune. I also have an exhaust though , so the air flow is smooth. Might be slightly different with stock exhaust. 👍🏽 runs like a champ
Just got myself a q and wanna do a mod that’ll add some hp and torque. What do you recommend? It’s the 3.0 awd version btw. I was thinking exhaust but even a catback don’t be adding all that hp. Also I want something that won’t void warranty cuz I want my shit to be covered.
@@jordantcastro oh yea I heard bout that from boost in motion channel! You think that mod alone would make the car louder then stock? And what exhaust system do you recommend bc even tho I want performance mods I definitely need this car louder, this shit too quiet stock 😂
@@thetruth9307 yeah it should make it a little louder , but the best way to get sound would be throwin an exhaust system in their. You could also install downpipes , but that would void your warranty I believe and you wouldn’t pass smog. Check out my ark grip exhaust video. It’s a little bit on the expensive side, but the thing sounds dope.
How much horse power does this add ? Because i have a 2014 Q50 i want to and a air intake but i dont know which one is the best one to be added with more horsepower??
Maybe about 10+ it’s hard to say. But AMS probably the best one to go with!! I don’t have a tune, but I’m sure if you have a tune or a boost controller , it’ll make the intakes hit a lot harder
Hmm.. You have a q60 3.0t ? Did you let the car warm up a little before you started to rev it up ? I did have the cover off of the intakes for the video, and I also have a catback exhaust, letting more air in/out.
@@Gamer-so1sk just follow the vid bro, you’ll be good haha. Just make sure you got the silicone parts in all the way and tighten those hose clamps 💪🏽 keep it up fam
If you guys have any questions, shoot your shot! Also don’t forget to check out my other videos if you guys are new! 💪🏽🙏🏽
say bro , you got an instagram or snapchat or something so i can dm you and ask about this install ? im having an issue , but so far its been very helpful until i confused myself .
@@bcompp I am so sorry I just now saw this comment 😂😭
@@jordantcastro all good brodie , i understand and i still support the channel❤️
@@bcompp thank you bro 🤝🏽 I appreciate that
Bro this was a big help I seen other videos talking about how the passenger side is that hardest part to uninstall and how they used some special tool to fit in the tight spot to loosen and tighten it, that pushed me away and not want try but you made it look easy ! So now I feel like I can do it !
Hell yeah bro, you got it 💪🏽
Have did yet since then ?
Best installation tutorial I came across 👌🏾💪🏾🔥 thank you 🙏🏾
You got it bro. Stick around 👍🏽
Bro i straight up watched like 3 other videos on installing these intakes, but yours helped all the way!!! Keep doin what you're doin!
Appreciate that brother , subscribe!!! 🙏🏽🙏🏽💪🏽
1:55 damn what that camera do to you? 🤣
Lookin mean bro keep on the grind makin some fire content 🔥
Was fired up and having fun with it 😂🔥 appreciate it bro
Yeeess sir!! This was a great vid and that intro cinematic was clean
🙏🏽📹
Bro keep on the grind I know you will blow up on this platform
Gangster asf, appreciate you brotha
Nice video bro keep grinding like always 💯💪🏽
My homie . 🙏🏽 you do the same bro
Mine sounded like that when I only had the AMS intakes but once I got the lower downpipe and ecutek ams tune, the sound went away. It sounds NA thought it does backfire/pop occasionally (not popcorn pops with multiple pops). I even added hks bovs and I don't even hear that on revs, only on wot pulls when I let off. Seems odd that everyone has different sounds. My datalogs shoe that everything is fine too. No leaks or anything.
Yeah that blow off valve goes crazy, I’m sure that’s hella fun to drive. I needa get my hands on one of those haha .
Fire 🔥 keep it up king! 👑
my dawg 🦁
That’s tuff man! Sounds sweet.. I’m definitely getting in on the #jordancastrochallenge 💪
Run that play 💪🏽💪🏽
Any check engine light? I’m planning on installing these on my 2018 luxe 3.0t
No issues at all bro. 👍🏽 goodluck with the install, just hit me up if you have any questions or need help.
Banger
tank shit.
Tight asf🔥 2021📶
Let's Gooooooo!!!!!!
Good shit i love ur channel man. U make me say fuck it and do it myself
Damn straight!! 🤝🤝 appreciate that shit
Good installation guide..
With THAT said... Intake "upgrade" on the Q is a waste of $. The stock intake system is already as good as it gets. So youre either blowing a lot of $ on the look under the hood, or a slightly different sound. There's little to no benefit for buying aftermarket intake for this vehicle.
This is just a bit of info toward those who are thinking about buying an intake for their Q.
Stock tune correct but if you have ams intakes and are tuned there are some gains in low and high end with these intakes . Not saying every intake only ams ,stillens are actually bad for the car
That’s wild. Why are the stillen bad. What’s different with AMS
Did you ever get your car dyno tuned after install
Nope.
#JordanCastroChallenge boutta take over!
Where the captains at
@@jordantcastro posting the video 👀
Sick video !! Do you have a 3.0 or 3.7? Also , any check engine light ??
Thanks homie. 3.0t and no check engine light 🙏🏽
@@jordantcastro Thanks for the reply !
@@alexiadeanda9940 no worries 👍🏽
Does it fit in the 3.7??
Im thinking of doing these right now ...
Get after it bro 💪🏽
hey man how did these work out for you? i’m looking to get the same ones and wondering how they did . thank you !
They’re great. They sound nice , and no issues. You can feel the car pull a little harder than with the stock intakes. Thanks for watching 🤙🏽
Do you keep that big OEM intake cover over the ams intakes? Or do you expose the AMS intakes while driving ?
You swap it for the new one. I have the new intakes exposed without it though
Any tips on what to do, my maf sensor is just stuck. No matter how hard I push it won’t come out, any tips?
I pulled off the little snap in zip ties that mount the wires to the car.. just keep trying bro you’ll get it. Put some gloves on and try again. Take a break and get back at it
Pull those clips out that I was referring to @ 3:55 in the video .. this will give you more space to work with
And it will be easier to disconnect the mass air flow sensor.
My turbo inlet tubes aren't completely flushed back all the way, do you know if this will be a problem. They are on about 85-90%
You can’t push it in ? Try putting a small little bit of lubricant
@@jordantcastroI was able to get it bro preciate it🙏 does that front duct still go on even tho it's blocking the intakes ??
@@jaden557 yes , you can put that back on too.. it’ll fit right into the new intake boxes
Does it run good without a tune ? & how’s the sound with the hood closed ?
Without the covers , it sounds beast.. i can hear it loud and clear while I drive.. and the car runs perfectly fine without a tune. I also have an exhaust though , so the air flow is smooth. Might be slightly different with stock exhaust. 👍🏽 runs like a champ
Just got myself a q and wanna do a mod that’ll add some hp and torque. What do you recommend? It’s the 3.0 awd version btw. I was thinking exhaust but even a catback don’t be adding all that hp. Also I want something that won’t void warranty cuz I want my shit to be covered.
Nice bro. 👍🏽 look into a jb4. It’s a plug in boost controller. Just unplug it if anything goes wrong before you take it into the dealership
@@jordantcastro oh yea I heard bout that from boost in motion channel! You think that mod alone would make the car louder then stock? And what exhaust system do you recommend bc even tho I want performance mods I definitely need this car louder, this shit too quiet stock 😂
@@thetruth9307 yeah it should make it a little louder , but the best way to get sound would be throwin an exhaust system in their. You could also install downpipes , but that would void your warranty I believe and you wouldn’t pass smog. Check out my ark grip exhaust video. It’s a little bit on the expensive side, but the thing sounds dope.
Here in MAryland I have ldp full custom catback ams intake mishitmoto hx and I’ve never not been told cars not warranted
And passed MAryland veip emissions testing ( still having primary cats no secondary’s )
How much horse power does this add ? Because i have a 2014 Q50 i want to and a air intake but i dont know which one is the best one to be added with more horsepower??
Maybe about 10+ it’s hard to say. But AMS probably the best one to go with!! I don’t have a tune, but I’m sure if you have a tune or a boost controller , it’ll make the intakes hit a lot harder
@@jordantcastro His 2014 is a 3.7.... So, no boost
@@SubZeDiZeD 👍🏽 thank u
I’m up for the #jordancastrochallenge
I installed mine yesterday on my q60 and doesn’t sound anything like this, do you know what my be te reason ?
Hmm.. You have a q60 3.0t ? Did you let the car warm up a little before you started to rev it up ? I did have the cover off of the intakes for the video, and I also have a catback exhaust, letting more air in/out.
@@jordantcastro yeah it’s a 3.0T, and this morning I removed the cover but it still doesn’t sound anything like yours lol ,...
@@Gamer-so1sk maybe it’s the exhaust system haha. The weather is also pretty cool where I’m at , that might make a difference as well.
@@jordantcastro I’m just scared I didn’t do it right 😨
@@Gamer-so1sk just follow the vid bro, you’ll be good haha. Just make sure you got the silicone parts in all the way and tighten those hose clamps 💪🏽 keep it up fam
🔥🔥🔥🔥🔥
Showtime 🎬🎬
Do the K&N air filters just get removed for the air intakes ?
yes, the whole air box gets replaced
good job
Thank you bro 🙏🏽
do u think u can run it without the intake shroud
100%
can u hear the air release from the cockpit ?
Hell yea.. every time
@@jordantcastro wtf. mine aren’t exposed is that why I can’t hear mine?
@@xavierspencer5530 yea bro.. you gotta take off the cover. I also have an exhaust system , so their is a little more air flow
@@jordantcastro will the filters get dirty if I take the cover off ?
@@xavierspencer5530 yes. It will get dirtier faster , but if you have an air compressor you can blow it out every now and then
Donde puedo comprar ese sistema
www.amsperformance.com/product-category/infiniti/intake-infiniti/