Explore a wide variety of content in our carefully curated RUclips playlist: • Binge-Worthy Content Find more amazing tips at @TotallyHandyShorts #shorts
@@Ripen3 it's a matter of right and wrong ways to do it. These tack strings are extremely weak. Doesn't mean anything about the person welding physically.
@@Ripen3 has nothing to do with being a “tough” welder. It has everything to do with welding correctly. Especially if someone is going to be showing or teaching people how to build stuff. But hey you keep doing you man.
As a welder, WHY THE HELL DO U JUST USE TACKS??? The onky reason to use tacks is to hold the pieces in place for the welds to be completed. If your worried about burn through, use less amps and stop making crappy welds that will break on you.
It's not about being able to, or not being able to start a channel.. It's starting a channel and giving the impression to those who don't know that it's an acceptable way to weld.
What in the hell has all these internet "welders" (emphasis on the quotations) have against running a damn beed!!! All those piddly tacs are supposed to be temporary to hold and adjust your work piece. THEN you burn in a nice stringer! About the only time you'll do what he's done here by continually using tacs is during thin sheet metal work, as to not warp your piece!
Can we actually start welding these? Like yea the things I see made are cool but they're kinda ruined with these lines of tacs. Your not welding it, your tacking it. Welding it would hold weight.
Dude Please go take a Welding class!!! PLEASE 🙏 Then after you atleast get the basics down , come back and start your videos again . You have some cool ideas , but the welding portion is just No Bueno!!
Is it really that hard to just weld in a straight line and not tac every half inch
They cut the vid
@@goodfellas1xx776 to make it look like they are welding. But it's all editing, it's tack welding every half inch
Straight up wat I was bout put on here
@@3kgtvr4owner86 hujuuujjjuiuh7
Классно: вдруг захочется спиральку намотать или пластинку металлическую))
*"И тут остаётся только один вопрос: зачем, а главное, НАХРЕНА?!"* ©Доктор Дью
Lord help the people that watch these and think that is how you weld
I was just thinking the same thing! Why do these guys tack tack tack tack. Just lay a damn head man.
@@Ripen3 it's a matter of right and wrong ways to do it. These tack strings are extremely weak. Doesn't mean anything about the person welding physically.
@@Ripen3 has nothing to do with being a “tough” welder. It has everything to do with welding correctly. Especially if someone is going to be showing or teaching people how to build stuff. But hey you keep doing you man.
@@hogie1259 KB wtcql
Its called a stack weld
How have you achieved surgeon-like accuracy with a grinder but you still can't lay a weld bead?
У тебя много шлака, либо у тебя плохая сварка либо попробуй поменять полярность
Там как бы шлака вообще нет, а разбрызгивае есть
Доктор Дью уже высказался по этому поводу.- Нахрена?
Видел 🤣🤣🤣
Tell me you don't know how to weld without telling me you don't know how to weld
Tack... tack.. tacktacktacktacktacktack
Hahaha!
As a welder, WHY THE HELL DO U JUST USE TACKS??? The onky reason to use tacks is to hold the pieces in place for the welds to be completed. If your worried about burn through, use less amps and stop making crappy welds that will break on you.
For VIDEO AND ILLUSTRATIONS ONLY…
Когда имеешь хороший инвентарь но не имеешь куда его применить!
Haha have you realy just spotted all the way across that plate take it you can't weld or is it one of the COLD WELDERS lol
Сижу...на серьёзных щах, жду что то полезное....
Полезные кончились.. остался подобный шлак
Im almos mad i watched this
Learn how to run a weld bead before you make anything else
The welding makes me cry
I guess the idea here is to view the sparks because we didnt see a finished project
You apparently didn't watch the entire video.
Try again, and remove your comment to avoid the foolish look you've taken on.
@@austinlane5533 They are slow minded people!! Probably Biden supporters!!
@@coleparkhurst5761
😅
You're probably 100% correct I'm willing to bet.
Смотреть одно удовольствие, спасибо. Кажется всё так просто. Ан нет. Простой российский пенсионер. Всем здоровья и добра.
I am not a welder but love to see this videos
This guy isn't a welder either! Lol
Damn. You had enough material to run actual beads, and you still douchebagged it up with tack welds...
Came here to say just this. No one can run a bead anymore.
DIY YT SHORT : absolutely no measurements! tool requirements! time requirements! material requirements!
Keep them guessing!
what is this tool please told me
Не пойму, что делать с большим количеством пружин???
I wish I could afford a mig tacker.
Then I could put it with my mig welder.
Мог бы еще туда через шестерни и понижающий редуктор эл двигло с выходом в инет и через ардуино со сматфона крутить эту проволку
Why don’t you ever run a bead? Whats with the kine if tack welds
What kind of weld is that
Bhai plz tell me the name of machine you used to weld
No me arrepiento el haberme suscrito a este canal. Muy bueno 👌
Чем бы дитя не тешилось, лишь бы не руками
Даю этому изобретению 500 полуляхов из 250
@@cel_lec кто такой полулях ???
@@user-xo3kn8dz3p единица измерения ненужности если по русски "Доктор Дью"
@@cel_lec так он есть ???
Info for non welders: it's edited. In real life it makes blinding light
Tell me you know how to waste steel without telling me you know how to waste steel
Понятно-как.
Не понятно- ЗАЧЕМ??
what is the name of this welding machine?
Welding name?
용접기 광고? 아니면 그라인더?
용접으로 만든 밴딩기같아요
This is a roller, not bender
Всегда думаешь-ну сейчас что-то точно крутое замастрячат-столько усилий, и в конце такой лёгкий пук. Спрашивается а автор запорами не страдает?
Ye machine kaha milegi
Name of this welding
Que solda é essa?
All the folks “that’s not a weld”
Why not start your own channel?
It's not about being able to, or not being able to start a channel.. It's starting a channel and giving the impression to those who don't know that it's an acceptable way to weld.
Welder wanted. Immediately
What s the machine? Tig or Mig?
Mig.
mandrel for winding springs and thin metal
Музыка классная. Не подскажите кто исполяет?
Я еще не досмотре но мне уже нравится давайте побольше таких видео чтобы было чем заняться летом на даче
What in the hell has all these internet "welders" (emphasis on the quotations) have against running a damn beed!!! All those piddly tacs are supposed to be temporary to hold and adjust your work piece. THEN you burn in a nice stringer! About the only time you'll do what he's done here by continually using tacs is during thin sheet metal work, as to not warp your piece!
И что ты там смастерил, умник?
Фигню какую то он смастерил
К сожалению на выходе говно, так как мягкая сталь здесь не подходит. Но задумка для мелких работ норм.
Если, вот это для тебя норм то у меня начинает проподать вопрос (много-ли дебилов в нашей стране?)
@@user-kw8yq8ti4m читать умеешь, что написано было?
Seems like you go around the corner to go next door
Just a damn tacker
Навес на ворота😄
is the welder gas?
Co2
It's a solid that uses gas.
Can we actually start welding these? Like yea the things I see made are cool but they're kinda ruined with these lines of tacs. Your not welding it, your tacking it. Welding it would hold weight.
Tự tạo công cụ rất hữu ích
That's some real driving 🎶😎 Dammm.
They must think tacks look cool in a video.
Just run the damn bead.
For the sake of mankind, please just use a lathe .You can even set the pitch like cutting a screw! Pay attention or pay cash.
Bad weld. Will twist off
Lots of keyboard welders about these days.
249 Полуляхов из 250😄
Зачем свариваете прихватками, сплошной шов не положить что ли? 😬
A,V Speed plz
Dude learn how to run a bead
Dude Please go take a Welding class!!! PLEASE 🙏 Then after you atleast get the basics down , come back and start your videos again . You have some cool ideas , but the welding portion is just No Bueno!!
The only bad thing about his videos are his ideas
Omg stop tacking. Make a damn bead for once
Que tipo de soldadura es cuánto cuesta
...쓸때없는거 참열심히만드네..
Я:Где-то я это уже видел
Он в моей голове: здраасссссссссссь
cuman buat spring ja sampe ribet gini. udah d potong panjang knp yg d tengah d buang....
He must like to bend and twirl a lot of things to go through all that
Когда инструмента до хрена,а идей нет!
Да пля велик ещё собери😁😉
Name tools in video
deberían alejar la cámara un poco para apreciar y ver mejor el video...
This guy has too much time on his hands. He should use some to learn how to weld
نوع اللحام ايه
Or you could buy 1,000 of them on Alibaba for 5¢ each
뭔디?
Эт чë?
250 полуляхов
Run a damn bead and stop with the tack tack tack. That's awful.
Nossa TOP DEMAIS, SHOW......
Music name
That's not dyi.. He's a pro
Gtfo
Бред какой-то. Столько всего перерезал, суету навёл, для чего?
근데도대체뭘만드는거냐?
밴딩기 만든것같아요
Как это сварка называется?
Кипромат
Нахуя придумана сия конструкция для пружиной?!
Я у мамы сварщик)))
👍🔥
Welders 😵
O bhai
НУ и нахрена мне это нужно?
250 из 250
Love from Bangladesh
Sell me 2 of those please.
Don’t promote bad welding
Где-то я уже это видел
Why? Зачем????!
Что-то делает. Но не понятно что.