How often do YOU wok cook? If you liked this video, you might like this Ninja NeverDull Knife review video, too: ruclips.net/video/nJLkc0nlHXY/видео.html
Thanks for your video. This video is definitely 'definitive' and covers my similar experiences as well. If people are expecting wok hei out of this, they're going to be disappointed because that temperature gradient isn't going to allow for constant searing. However, for the price and utility, it's not a bad buy to start out with wok stir fry because of that induction base. A major benefit is being able to season the wok outdoors, which removes the headache of the entire house smelling like smoke, in addition to the accessories provided for many uses.
I suspected early on that the induction coil did not extend as far up as you believed. And the heat discoloration on the bottom of the wok at the end of the video confirmed it. So it's only about a 6" coil, like on most NuWave induction tops. Also, I'm betting the wok thickness is probably consistent from the bottom to the edge, which would explain the rapid heat loss. (How quickly the bottom discolored is also a hint.) A good carbon steel wok will have a thick bottom and a thin edge. (It also wouldn't keep tipping from the weight of the handle as much.) Btw, to steam veggies in a wok you pull them up the sides, put water in the bottom, and then put the lid on. And the rack is for steaming large stuff, not so much for draining fried stuff. lol That's all from general knowledge. I do have experience, though, with induction woks that we had in a shop in a dining hall I worked in. They had small stainless woks, and are mostly used for hot holding, but we did cook in them as well.
Great stuff, beast! Yeah.. Once it got past about half way up, the heat dropped way off on it... It's still a decent little wok, imo... But just not as much as I was hoping for.
The 600 & 900 watt settings are more for RV camping / van life or ancient outlets that can't supply the higher power. They're there if you really need them, but if you can feed it 1500watts then for this thing that's really what you need to do. As for the 'un-needed' vent hole ... if you've ever had a lid vacuum seal itself onto a counter you'll appreciate it being there to keep that from happening. For myself, I'll be using the pre-heat on the initial start up pretty religiously just to help avoid pan warping. From what I understand with induction it's the cold pan OFF trying to ramp to 100%ON HOT that is the underlying cause of most of that. So intentional slower starting it will be for me.
Ah good point... Never looked at the RV angle. The air hole issue ended up not being much of a thing anyway, since the pan doesn't make a good seal anyways... Slightly different shape. Agree with out in the preheat too.... Good practice to be in... Cheers!
This was a great review for a guy looking for a dedicated wok cooker. One thing I would have liked to see is how this maintains deep frying oil temp setting throughout the cooking process. I've been trying to use one on a regualer gas stove, but gave up trying to guess and constantly adjust the burner, usually ending up overheating the oil. Like with deep frying bone in chicken pieces with the extreme temp variation you get and how well the unit preforms keeping a set temp. That is what I will mostly be doing, with one as a deep frying station.
Hi, Allen. This uses a pretty thin carbon steel wok, so it doesn't retain heat super well. There was a pretty noticable temp drop when I was adding ingredients to it for a bit. Not sure how much it will affect frying oil, but I'd imagine there will still be a drop there of some sort. The temp the the wok gets to always seems to be a little less than what the dial is set to, as well. I should probably try doing something like a tempura recipe in it or something.
@@JoesPhenomenal Thanks for the reply, Joe, and info. I'll be using a heavy cast iron wok for my deep frying so it may not be as big an issue with temp regulation. In my mind, the cooker is worth the investment to see for myself how it preforms with my cookware. 👍
I’ve had the unit for 2 years and I do all my frying in it without a problem. When you put a lot in it the temperature will drop but goes up fast enough. Don’t forget that if you put a soup pot of water it boiling in 48 seconds.
If youre worried about not getting enough heat up the sides, in theory you should be able to just do 2 batches or whatever and get the correct heat both times.
Very true.. The point that Nuwave was trying to make with the curved induction surface was that you'd be able to go up a lot farther on the sides though. It still does a nice job, and I like it, but I still think a big flame with a traditional style wok is hard to beat.
I have one, and it works but....... It heats really well and then seems to forget to keep the heat on. Your sizzling away and then notice that the heat suddenly goes away and you have to turn up the temp to keep frying. Also the main drawback to a burner is no wokhay
Yeah... It's a little rough with the heat retention depending on what you got on it... If you're not cooking a large portion, it seems to do really great though.
To me, it looks like you have at least twice what you should in a pan that size. No experience with that cooker, but I’m assuming it would work out better if you cut the recipe in half.
Hey Joe!!! HI!! Great review. I'm puzzled by the product. I do a wok with one hand on the wok handle and one hand on the spatula. I move both the spatula and the wok around over a gas flame. This way I can keep the oil moving and the food moving and even give stuff a toss. But it looks like. you can't lift the wok off the base because if you lift it it shuts down? What happened when you dumped out the broccoli? Did it shut down and need to be reset? I didn't hear it start to scream (beep beep). And.. if you lift it it stops heating because it looses contact. Also... if you spill any food bits into the base while cooking it will interfere with the induction contact with the pan??? I appreciate your in depth explanation of the controls. I do like that you can select the power level. Thanks for great review. Also enjoying your kitchen shed build. HUGS
Heya Daisy. You can lift it off. It will give you a little time before it shuts the burner off if you remove it. I was able to dump the veggies and stick it back on with plenty of time to spare. Seems like around 7 or 8 seconds. If you drop anything on the induction surface that's big enough to inhibit the pan from making contact, it will end up stopping after several seconds, also. I still think the gas flame method you use it better for wok cooking though. It looks like they wanna ban gas ranges these days though for whatever reason.
@@JoesPhenomenal they're talking about not putting gas ranges in new houses. We learned gas stoves are really bad for kids' (and adults) lungs, so it makes sense to move away from them. I have kids and a gas range in my rental house, so the standalone induction ranges help me not give my kids asthma.
It may work well but the problem: You're going regular (indoor) cooking, presumably. By using this thing on your counter or table, you forfeit the hood, so aerosolized oil will get everywhere. It's easy to discount that, but it does matter and you're really going to want to do high-heat cooking with good ventilation inside your house. Sorry to be a party pooper, would be nice if that problem didn't exist.
Thanks for the great input... In my case I only use it on the counter like that for RUclips vids. For cooking I usually just set it in my cooktop under the range hood to account for that. Excellent points though!
I don't think I would buy that nuwave induction for my wok. I'm perfectly happy with my gas wok range. Love the dragon-like flame that comes from the wok range.
Does it give you the wok smoky flavour if using on high? I really want a wok burner but don’t have the space so hoping I can get something that replicates a gas wok burner
@kanethecracker Thanks! I was thinking about doing some sort of seasoning video for that thing.... The fact that it's portable makes it easy to just bring it outside for that.
What's the voltage rating of this burner? I'm not fron US so I'm concerned if i order from amazon us and receive 110 V. That won't work in my country..
@@JoesPhenomenal that sucks for me. Here's to hoping induction takes off already. I dont want to keep a potential hazard in my house just to have a proper wok.
Yeah... I felt it should be a little bigger too. It's a good option if you don't have gas cooking, since you don't have a flame to come up the sides of the wok. The shape might have something to do with how far the induction coils can be curved around the bottom or something like that.
I doubt the induction coils go up the sides of the wok. My guess, they are just around the bottom. I could be wrong. How about a tear down video? Love your videos.
They go up a little bit... Seems like the heat levels stay up pretty well until you get about 40% of the way up the side which is reasonably close to the edges. They tear down is interesting though, in any case. If the review vid ends up popular enough, I'll have to do a video for that. Thanks for the love, Stevek!
Well... Induction produces instant heat, but the metal from whatever pans you use need time to get up to temperature... That kinda varies based on the material used. It's a lot faster though and way more efficient. The compelling thing about that wok, was more for the fact that you get a curved induction surface. Since induction ranges only work on stuff making direct contact, I liked that you would have a decent wok option for that tech... I still think gas is better for a wok, imo though.
I have had a terrible experience with NuWave product support. I bought induction cooker and after only 2 months it just stopped and gave an error code. NuWave customer support has been awful awful. I’ve sent them pictures, receipts and many emails and they have done nothing. Now a year later I have a non-working NuWave in a drawer. Please never buy NuWave
Heya.. well that's a lot of power! A 20amp outlet can only produce about 2400watts or so. so you'ds have to go with 240v outlets... and even for those, you'd need it to handle about 130 amps . But... that would be crazy powewrful! I think full induction ranges come in around 4000w, and that's at full power with all the burners on.
7:01.. no.. not it’s not.. mine redetects it and resumes energy transfer Lol.. damn I’d hate that.. imagine wok tossing and having to reselect that everytime you toss 😆😆😆
@@JoesPhenomenal Sorry, but that induction cooker is a waste of money and time. Real stir frying sears the food, leaving it succulent and crispy with a slightly charred flavor. Your induction cooker, however, induces all the flavor and water to run out of the food, leaving a soggy insipid mess. You might as well use a lowly kitchen stove. A better apparatus is to purchase a gas turkey fryer and modify it for use with a wok. It's not rocker science and there are plenty of videos showing how to rig something up with minimal effort. It produces a ton of heat and requires you keep the food moving to prevent burning. Of course, you should use it outdoors as it generates a ton of heat and smoke. The difference in the stir fry is night and day and is often far superior to what you can get from the very best Chinese Restaurants.
@bobweiram6321 hey... I like that turkey fryer idea... You're right about the wok... It just doesn't maintain high enough temp to really match a good wok on a gas fire.... I suppose it's ok for someone with really limited space and no gas cooking though.
8:20.. that’s because it’s an afterthought to please the Karen’s and people who want to use it like a soup pot 😆😆… yes I know woks are the most versatile pan in the kitchen, but woks shouldn’t come with lids.. I’m not roasting the idea, because again woks are used all over the world for different reasons, and dish types.
How often do YOU wok cook? If you liked this video, you might like this Ninja NeverDull Knife review video, too: ruclips.net/video/nJLkc0nlHXY/видео.html
Just started cooking, my only pot is a wok. I slow cooked chicken in it today.
Very nice!
for breaky.
Thanks for your video. This video is definitely 'definitive' and covers my similar experiences as well. If people are expecting wok hei out of this, they're going to be disappointed because that temperature gradient isn't going to allow for constant searing. However, for the price and utility, it's not a bad buy to start out with wok stir fry because of that induction base. A major benefit is being able to season the wok outdoors, which removes the headache of the entire house smelling like smoke, in addition to the accessories provided for many uses.
Well said! I totally didn't think about being able to season outside since it's a plug in. Good call.
I suspected early on that the induction coil did not extend as far up as you believed. And the heat discoloration on the bottom of the wok at the end of the video confirmed it. So it's only about a 6" coil, like on most NuWave induction tops. Also, I'm betting the wok thickness is probably consistent from the bottom to the edge, which would explain the rapid heat loss. (How quickly the bottom discolored is also a hint.) A good carbon steel wok will have a thick bottom and a thin edge. (It also wouldn't keep tipping from the weight of the handle as much.) Btw, to steam veggies in a wok you pull them up the sides, put water in the bottom, and then put the lid on. And the rack is for steaming large stuff, not so much for draining fried stuff. lol That's all from general knowledge. I do have experience, though, with induction woks that we had in a shop in a dining hall I worked in. They had small stainless woks, and are mostly used for hot holding, but we did cook in them as well.
Great stuff, beast! Yeah.. Once it got past about half way up, the heat dropped way off on it... It's still a decent little wok, imo... But just not as much as I was hoping for.
To me you have the best Kitchen Appliance channel you need more views and subscribers.
Hey thanks... Appreciate ya. We're getting there.
The 600 & 900 watt settings are more for RV camping / van life or ancient outlets that can't supply the higher power. They're there if you really need them, but if you can feed it 1500watts then for this thing that's really what you need to do. As for the 'un-needed' vent hole ... if you've ever had a lid vacuum seal itself onto a counter you'll appreciate it being there to keep that from happening. For myself, I'll be using the pre-heat on the initial start up pretty religiously just to help avoid pan warping. From what I understand with induction it's the cold pan OFF trying to ramp to 100%ON HOT that is the underlying cause of most of that. So intentional slower starting it will be for me.
Ah good point... Never looked at the RV angle. The air hole issue ended up not being much of a thing anyway, since the pan doesn't make a good seal anyways... Slightly different shape. Agree with out in the preheat too.... Good practice to be in... Cheers!
The timer feature is a great option if youre trying to send food out on a consistent basis
Good info
This was a great review for a guy looking for a dedicated wok cooker. One thing I would have liked to see is how this maintains deep frying oil temp setting throughout the cooking process. I've been trying to use one on a regualer gas stove, but gave up trying to guess and constantly adjust the burner, usually ending up overheating the oil. Like with deep frying bone in chicken pieces with the extreme temp variation you get and how well the unit preforms keeping a set temp. That is what I will mostly be doing, with one as a deep frying station.
Hi, Allen. This uses a pretty thin carbon steel wok, so it doesn't retain heat super well. There was a pretty noticable temp drop when I was adding ingredients to it for a bit. Not sure how much it will affect frying oil, but I'd imagine there will still be a drop there of some sort. The temp the the wok gets to always seems to be a little less than what the dial is set to, as well. I should probably try doing something like a tempura recipe in it or something.
@@JoesPhenomenal Thanks for the reply, Joe, and info. I'll be using a heavy cast iron wok for my deep frying so it may not be as big an issue with temp regulation. In my mind, the cooker is worth the investment to see for myself how it preforms with my cookware. 👍
Use a heavier carbon steel wok… thin pan temperature inconsistency isn’t special to induction burners
I’ve had the unit for 2 years and I do all my frying in it without a problem. When you put a lot in it the temperature will drop but goes up fast enough. Don’t forget that if you put a soup pot of water it boiling in 48 seconds.
@Raven-ep6pq heating liquids up in induction is soooo fast. Love it.
Great video ...thanks for the review. lets us decide if its something we'd like to purchase...
Thanks, Diana
So if the wok is 14 inches i cant get my head around why they didnt make the bowl 13 inches across? Strange that!
Maybe some sort of cost issue?
If youre worried about not getting enough heat up the sides, in theory you should be able to just do 2 batches or whatever and get the correct heat both times.
Very true.. The point that Nuwave was trying to make with the curved induction surface was that you'd be able to go up a lot farther on the sides though. It still does a nice job, and I like it, but I still think a big flame with a traditional style wok is hard to beat.
I have one, and it works but....... It heats really well and then seems to forget to keep the heat on. Your sizzling away and then notice that the heat suddenly goes away and you have to turn up the temp to keep frying. Also the main drawback to a burner is no wokhay
Yeah... It's a little rough with the heat retention depending on what you got on it... If you're not cooking a large portion, it seems to do really great though.
To me, it looks like you have at least twice what you should in a pan that size.
No experience with that cooker, but I’m assuming it would work out better if you cut the recipe in half.
Definitely would have helped.
Those 2 dishes look absolutely yummy !
Thanks! Appreciate it. I have recipe videos for both of those on the channel.
dude, that is not stir frying, that is stir boiling. Cook in batches next time and higher heat.
I'd say that accurate... Got overzealous with what I put in there for sure.
He didn’t burn off the factory seal. Don’t worry I made the same mistake. It starts off black but it’s supposed to be a silverish.
Yeah... I totally messed that up. Haha. I even made a note to do that, and still forgot.
Hey Joe!!! HI!! Great review. I'm puzzled by the product. I do a wok with one hand on the wok handle and one hand on the spatula. I move both the spatula and the wok around over a gas flame. This way I can keep the oil moving and the food moving and even give stuff a toss. But it looks like. you can't lift the wok off the base because if you lift it it shuts down? What happened when you dumped out the broccoli? Did it shut down and need to be reset? I didn't hear it start to scream (beep beep). And.. if you lift it it stops heating because it looses contact. Also... if you spill any food bits into the base while cooking it will interfere with the induction contact with the pan??? I appreciate your in depth explanation of the controls. I do like that you can select the power level. Thanks for great review. Also enjoying your kitchen shed build. HUGS
Heya Daisy. You can lift it off. It will give you a little time before it shuts the burner off if you remove it. I was able to dump the veggies and stick it back on with plenty of time to spare. Seems like around 7 or 8 seconds. If you drop anything on the induction surface that's big enough to inhibit the pan from making contact, it will end up stopping after several seconds, also. I still think the gas flame method you use it better for wok cooking though. It looks like they wanna ban gas ranges these days though for whatever reason.
@@JoesPhenomenal they're talking about not putting gas ranges in new houses. We learned gas stoves are really bad for kids' (and adults) lungs, so it makes sense to move away from them. I have kids and a gas range in my rental house, so the standalone induction ranges help me not give my kids asthma.
@NateSchoolfield yeah.. I'm a big fan of the induction... Gas ranges are a pain to clean also.
What temperature do you season it at...
I set mine at 500 and let it burn in for a few mins. I do it outside though. It produces a lot of smoke during that process.
It may work well but the problem: You're going regular (indoor) cooking, presumably. By using this thing on your counter or table, you forfeit the hood, so aerosolized oil will get everywhere. It's easy to discount that, but it does matter and you're really going to want to do high-heat cooking with good ventilation inside your house. Sorry to be a party pooper, would be nice if that problem didn't exist.
Thanks for the great input... In my case I only use it on the counter like that for RUclips vids. For cooking I usually just set it in my cooktop under the range hood to account for that. Excellent points though!
I don't think I would buy that nuwave induction for my wok. I'm perfectly happy with my gas wok range. Love the dragon-like flame that comes from the wok range.
It looks badass too. haha
Anything induction and I’m down to watch lol
Hi, great video, will this induction unit accept other woks?
It should work fine as long as the other wok follows the same shape, and also it made of something magnetic.
Does it give you the wok smoky flavour if using on high? I really want a wok burner but don’t have the space so hoping I can get something that replicates a gas wok burner
It can, but it needs to be seasoned really well, and will produce quite a bit of smoke... Gotta make sure you have plenty of ventilation.
@@JoesPhenomenal thanks man, appreciate you letting me know! I’ve just subscribed
@kanethecracker Thanks! I was thinking about doing some sort of seasoning video for that thing.... The fact that it's portable makes it easy to just bring it outside for that.
Just need to be used on your range top to benefit from the ventilation I guess!@@JoesPhenomenal
@DanFuzz2009 yeah.. That helps.... Better have a pretty powerful range hood though. That seasoning makes a lot of smoke!
4:41… that’s not good.. you don’t want the fans kicking off when it’s hot.. the electronics get overheated..
What's the voltage rating of this burner? I'm not fron US so I'm concerned if i order from amazon us and receive 110 V. That won't work in my country..
It's 110/120v If you are using 240v power, you might be able to use a 240v to 120v converter... One option, in any case.
@@JoesPhenomenal that sucks for me. Here's to hoping induction takes off already. I dont want to keep a potential hazard in my house just to have a proper wok.
@@juanstar I hear ya... I've never trusted those converters.
The wok is not truly concave as it should be.
Yeah... I felt it should be a little bigger too. It's a good option if you don't have gas cooking, since you don't have a flame to come up the sides of the wok. The shape might have something to do with how far the induction coils can be curved around the bottom or something like that.
I doubt the induction coils go up the sides of the wok. My guess, they are just around the bottom. I could be wrong. How about a tear down video? Love your videos.
They go up a little bit... Seems like the heat levels stay up pretty well until you get about 40% of the way up the side which is reasonably close to the edges. They tear down is interesting though, in any case. If the review vid ends up popular enough, I'll have to do a video for that. Thanks for the love, Stevek!
why a pre heat setting , induction is supposed to be instant. too many unnecessary increasing the price.
Well... Induction produces instant heat, but the metal from whatever pans you use need time to get up to temperature... That kinda varies based on the material used. It's a lot faster though and way more efficient. The compelling thing about that wok, was more for the fact that you get a curved induction surface. Since induction ranges only work on stuff making direct contact, I liked that you would have a decent wok option for that tech... I still think gas is better for a wok, imo though.
It’s right for me….if you’re doing the cooking!!! 😂
LOL
I have had a terrible experience with NuWave product support. I bought induction cooker and after only 2 months it just stopped and gave an error code.
NuWave customer support has been awful awful. I’ve sent them pictures, receipts and many emails and they have done nothing.
Now a year later I have a non-working NuWave in a drawer.
Please never buy NuWave
I want at least 15000 watts, ideally 30 000 watts
Heya.. well that's a lot of power! A 20amp outlet can only produce about 2400watts or so. so you'ds have to go with 240v outlets... and even for those, you'd need it to handle about 130 amps . But... that would be crazy powewrful! I think full induction ranges come in around 4000w, and that's at full power with all the burners on.
Then you probably need a gaz installation like they have in commercial asian kitchens😁
@DanFuzz2009 yeah.. That's serious power.
7:01.. no.. not it’s not.. mine redetects it and resumes energy transfer Lol.. damn I’d hate that.. imagine wok tossing and having to reselect that everytime you toss 😆😆😆
It gives you some time before it shuts off.. something like 8 seconds, so it's not too bad.
@@JoesPhenomenal mine kick off beeps, then after 30 seconds of no sensing, it shuts off and runs fan for a minute or 2
Looks like a complete waste of money if you have access to a gas range.
Looks like it might start getting tough to get gas ranges pretty soon though unfortunately.
@@JoesPhenomenal Sorry, but that induction cooker is a waste of money and time. Real stir frying sears the food, leaving it succulent and crispy with a slightly charred flavor. Your induction cooker, however, induces all the flavor and water to run out of the food, leaving a soggy insipid mess. You might as well use a lowly kitchen stove.
A better apparatus is to purchase a gas turkey fryer and modify it for use with a wok. It's not rocker science and there are plenty of videos showing how to rig something up with minimal effort. It produces a ton of heat and requires you keep the food moving to prevent burning. Of course, you should use it outdoors as it generates a ton of heat and smoke. The difference in the stir fry is night and day and is often far superior to what you can get from the very best Chinese Restaurants.
@bobweiram6321 hey... I like that turkey fryer idea... You're right about the wok... It just doesn't maintain high enough temp to really match a good wok on a gas fire.... I suppose it's ok for someone with really limited space and no gas cooking though.
8:20.. that’s because it’s an afterthought to please the Karen’s and people who want to use it like a soup pot 😆😆… yes I know woks are the most versatile pan in the kitchen, but woks shouldn’t come with lids.. I’m not roasting the idea, because again woks are used all over the world for different reasons, and dish types.
LOL. makes sense