2023 30 Canister Shell Comparison Demo Geishas Bombas Masters and more
HTML-код
- Опубликовано: 17 июн 2023
- 30 shell comparison using 2ea of all 15 kits i have in my stash this year. Had a small issue with some MJG igniters, but worked through it to complete the demo.
Also revealed my new logo and banner moving forward
#fireworks #pyro #fireworkstash #fireworkdemo #canistershells #chroma #geisha #giantpanda #bombas #anarchyred #ansrchyblack #manhattanproject
Great comparison. Thanks pyro. No worries on the ignitors, you live you learn. As someone pointed out UKFR has done some great testing with igniters over the years.
Appreciate it!! Definitely learning as i go!
Rock on 🤘🏼 brother 🧨 💥 💣 Congrats on the 500 Pyro!
Appreciate it! Up over 700 now cause of you guys!
Aye brotha congrats on 1K man first vid i’ve watched and it was a an amazing video definitely going to watch more of your content keep it up 🎆👍🏼
Appreciate it! The support does not go unnoticed!
What works really well for me with the mjg igniters is actually taking the fuse out and putting the igniter directly in the lift charge. never had a misfire doing that.
Just subbed over 700 now let’s F’n Go Congrats dude
Appreciate the support!
Non-OL Rank based on effect & sound
1. Geisha
2. Bombas
3. MineCraft ( mine effect extra points for me )
4. Giant Panda
5. Hammer of thunder
6. Manhattan project
7. Chroma
8. Ghostacular ( rings are tough for cans)
9. Neon strike
10. American firepower
OL Rank - effect shells only
1. Master 7
2. Master 6
3. Anarchy reds
Great video man my opinion might be different in person as I've only fired bombas, chromas, and minecraft myself.
Would have to agree on most of these. The Geisha shells are absolutely beautiful.
I hear so much good about Chroma, but in a side by side they looked pretty weak, I'd put them last or right above American Firepower. Most the SFX stuff has been super high quality for me, that Minecraft was SWEET. The top spot is a tie for me between Geisha and Minecraft.
Congratulations keep it up very nice comparison video I like them all🔥🔥🤘🏻🤘🏻
Appreciate it! I think any real pyro likes anything that goes boom haha!! 💥💥
Congratulations 🎉
Appreciate it!
Just subbed, at 960!!! Almost there!!!
Appreciate the support!!!
Awesome demo, i have all those superior shells, cant wait to try em
The Manhattan shells definitely impressed. Happy 4th!
Very nice Demo ... SUBS !!!
Appreciate the support!
great demo love shell comparison the master 6 an 7s are awesome just subscribed great Logo
Thanks for the sub!
The comparison was on point. I'm also here in Colorado, but down south. I'm the number 700 sub for you. I always support fellow pyros in the state. 💪
Appreciate the support from everyone, but especially other Colorado pyros!!
DM me on IG.
@Sanchez-cn4qh DM me on IG
Very nicely done. Appreciate u showing off the selection. Wish i could find masters shells. Running raccoon break the rules this year.
Raccoon shells are a great choice! Happy 4th!
Thanks for the video brotha. I know its a lot of hard work. Idk about the connectors but itlooks like its just not getting hot enough to me. Youll get it brotha, stay trucha, nice video.💥💯💙
Appreciate the support and feedback. Will definitely keep at it!
Why do I feel like my mind is blown watching this video with all these shells, awesome presentation! The Thunder shell was cool, Geisha was poppin, but whatever them Master bombs are I needs dem! Wow💯
Those hammers really surprised me as well. Geishas are easily my favorite consumer shell. Master are masters, iykyk.
I’ve always like the Geisha shells but locations are to far away and shipping cost….. well I’m sure you know how it works… so wasn’t able to get any yet but again the master 6,7 are ridiculous
Gotta shop red apple when they have the stuff you want on sale and they offer $99 shipping. That's the only time it's worth it. I will be doing one big order of shells through them annually.
$99 shipping that doesn’t include a minimum purchase $1199 etc?
watching on June 28th; you're just over 1k subs! congrats!
Appreciate it! Brainstorming ideas for a 1k video... Hopefully something before the 4th.
Nice demo!
Awesome 👌 demo says #BBQRando 🌵💥💥💥 Keep the #pyro passion going ❗️
Thanks #BBQRando! Will definitely keep the #Pyro going!
Dam what a shell for the master 7, was a great shell
Those are definitely a neighborhood winner. Haha
👍👍👍
Appreciate the comment!
I dig your style bro. I'm always on the look out for the bangers like the anarchy whites etc. Picked up some bubba thumps this year im itching to light those bad boys up this year.
Appreciate it man! Only discovered bangers this year, next season will be even bigger!
Lets collaborate together on where to find them let me know how to contact you. I got rid of all my social media but we can figure something out to get in contact
Honestly best way is either Facebook, which i rarely use, or IG. Have my email linked to my RUclips channel, but not sure where you would find it haha.
You don't have to be specific but where did you find those bubba's? A store or did you just find someone selling them. I can't find salute cans to save my life
As others are saying, cut the fuse to expose the powder. Ive been using the mjg clips and they seem to work well also. I passfire most of my shells to save on ignitors and I'm limited on cues, but if your already using one ignitor per shell, might as well go directly to the lift charge. More satisfying having the instant launch also loll
I have thought about going directly to the lift charge. But I don't like the idea of having the igniter down the tube.
@MileHighPyro-303 it works well, doesn't affect the shell leaving the tube. Just add a screw on the rack to wrap the ignitor around or drill a small hole at the top of the tube to knot the wires in it. This keeps the shell from yanking the wires as it leaves
@MileHighPyro-303 couple tips when poking directly into the lift, always leave the shroud around the match, push the shroud/match all the way into the shell, tape the hole, if you do use the mjg initiators with fuse leave a space between the fuse and the match head, don't push the fuse right against the match, and most importantly tie off the end of the wire to a screw or nail on the rack
@@MileHighPyro-303 CodyBPyrotechnics has some videos on fusing mortars/racks where he shows cutting off the bottom of the cans and pouring the lift charge into the tube, then having two small (only big enough for fuse to go in) holes drilled near the bottom. One input, one output both around the lift charge height (right next to bottom). Dump the lift charge, put the cannister sitting on top of the lift, then put fuse into and out of (then from the output to the next input) and hot glue the fuse onto the tube (put fuse into the hole then hotglue then lift charge on the off chance the lift is ignited by the glue.. they said they haven't had it happen in over 1,000 cans though.)
Tape and extra fuse works great
That's what I thought, but the white quick fuse still didn't help with these.
@@MileHighPyro-303 honestly I just use tape on the rack just connect the fuse to the next fuse. It’s more like a sky puke
Gotcha. Ive definitely done that before haha sky puke can be fun.
Nice show bro
Appreciate it!!
i love your video
Appreciate it!!
First time I’ve ever seen that but I don’t use a system that kinda changes my mind on getting one
It's worth it to directly invite cakes. Timing is great when used that way. mJG is just trickier to use directly with green visco fuse. Talons work better for green visco.
I go with 2 zip ties with a piece of one inch tape and a leader fuse. If running mjg best to poke them.
Poking them is definitely the best option. May do that on everything just to be safe.
I had the same problem last years 4th show. With those MJGs
I've switched to talons for any fuse connection, and use MJG exclusive for direct cake ignition.
@@MileHighPyro-303 yeah they work good on my cakes just racks with fuse was the problem. U even wrapped em with tape and put hi speed fuse like he did
Geisha by far the best willow kit ive shot 🙌🎆
Definitely one of the best, especially for regular consumer shells.
@@MileHighPyro-303agreed 🙌
It's the small piece of white fuse that is causing a problem. When you hit that quick fuse with the igniter that short amount of fuse explodes. It's not giving it enough time to ignite it's just blowing out the tape . Alright personally don't care for electronic lighting I hand light everything timed with fuse.
Interesting thought. I had tried this method before and it worked much better than just attaching the igniter to green visco on rockets or cakes. Now it's the same method possibly causing the issue. Back to the drawing board. I will likely manually fuse my shells and rockets for the 4th.
Talons are the way to go
Love the MJG for direct ignition on cakes. Talons do work better for rockets and shells. Just weird to see a fuse explode but not ignite.
@@MileHighPyro-303 look up a video Consumer igniter failures it’s like a 20 mins video they test out different lengths and types of consumer igniters I just watched it yesterday and learn a lot since it’s my first time using a firing system this year
Awesome vid pyro, new sub, sucks that you had so many misfires, good old blowtorch doesnt do that lol, old school pyro here, pyro brother and stay safe.
Definitely enjoy hand lighting. May go back to that for sure haha. Something about your hands smelling like powder after the show just feels different than hitting buttons
@@MileHighPyro-303 well said pyro and the burn marks on our shirts lol
Maybe go over that rack you have? How it’s made ? Tube size of and what’s at Tempe bottom ?
Just replied to your other comment. Happy to answer any other questions. That's for the support!
That's why I don't waste my time and money on electronically lighting fireworks
I will say, using these igniters directly in cakes is definitely worth it. The issue is using MJG with rockets or shells. Talons seem to work better for those, but you still don't get the instant launch.
Its how they were done, clip ons suck .. Electronically is way better when done correct that’s why mainly all professional shows are done that way
CLIP ON IGNITERS FOR FUSES👍
That's definitely the route I'm going for my show. MJG for the cakes and talons for the shell racks and rockets.
You dont want your visco to touch the igniter if using on cans get MJG to visco connectors or carefully notch the shroud, split your visco & run the visco across the top of the shroud rather than down in it & then tape it down.
🙌🎆
Geisha and Bombas were pretty dang good the only one that was better was the master 7 great video and to bad red apple does not get the credit for how good a lot of their products are. Superior was not bad either the Manhattan shells were 😢better than I thought and I am glad because I bought a case this year for the first time. Great demo and to bad the igniters failed.
Appreciate the support. I agree with everything you said. I think it's widely accepted that red apple shells are great, their cakes is where they lack. Love the great American fireworks co brand as well. So far everything ive launched from them has been great.
Even if they false advertise a bit with the shell length(which most of these companies do), their shells are still solid. Great prices especially if you get cases on sale. The branding/artwork is sick and I love that every shell is different, numbered, and labeled. For 60g shells you can’t really go wrong.
I only go directly into the charge.
I definitely do that with all of my cakes, but not shells.
Great Video! Did it look like the 4” Anarchy hit louder than the 6” ones
Anarchy reds are OL, so they will hit harder than standard 6".
had A last year and M this year A break low sound load but nice shells M are monsters, but A can be priced a lot lower for better deal.
Subscriber 966 boom boom pow. I like the master 6, them cans sound mean Bro.
Appreciate the support!! Those masters are definitely no joke.
i had happen to me Kingslayer by Dominator 18 shell kit4 in a row
You learn from it , and move on. Appreciate the comment!
🧨🔥
I would look for Ematch,
Regular ematch with A piece of masking tape around the ignitor and fuse has almost 100 percent success rate that way.
Theres also a channel that has done extensive testing on electronic ignition, he may be worth looking up, the channel is "UKFR'
Appreciate the tips and pointing me in the right direction!! Will definitely look into that.
@@MileHighPyro-303 no problem.
Stay safe ✌️
You as well, happy 4th!
You need an ATF license to get ematch
@@Southsidechipyro you must have never heard of Amazon.
How much louder are salute cans like anarchy white than OL color like master 100s? I know at a certain point it stops mattering deepening on price.
Salute specific shells are much louder than OL color shells, doesn't come close.
I like to cut the fuse on a 60° angle and then install my igniters you're exposing much more powder inside
Appreciate the comment and advice!!
Where did you get the Master and Anarchy shells?
Have a couple different sources. Have to dig a bit and gain some trust.
Best mortars for 2023???
From what i have, master 7 hands down. Regular consumer? I would say geishas.
Can you elaborate on how you got "misfires" does this mean that the shell you thought went off didnt go off or did something else go off instead?
I guess i was confused when you said "misfire" i assumed you had some sort of crossfire.
Probably poor choice of words. Should have said those shells failed to ignite.
@@MileHighPyro-303 do you have access to quicmatch
I do not unfortunately. That would make things easier haha
So i was wondering can you shoot a 7" shell out of a 5" canister shell tube? Thanks!
If you're talking about cannister shells, yes. You can shoot 4"-7" all out if the same 12" tube. All that matters is the diameter.
@@MileHighPyro-303 awesome, thanks for the information!
Your coming up on 700 ! you made this a while ago.
73
I recorded the intro about 2 weeks ago and then had a combo of bad weather, nuggets Championship and vacation chew up all my time. Glad to finally get the video out though.
@@MileHighPyro-303 💥
bro ive used MJG ignitors for years, this is on you.
Interesting, appreciate the feedback. I wonder what the hell I'm doing wrong.
@@MileHighPyro-303 are you using talons? ematches?
It's the MJG igniters with the red shroud. They work great for cakes and direct ignition. Had issues with rockets now shells. Thought I solved the issue with a small piece of white quick fuse, but clearly not.
I usually cut the fuse in an angle so it can exposed the actual powder in the fuse bro just used non conductive cutters
@@jchav05 This! I've had a much higher success rate lighting fuse with MJG igniters since starting to cut the end of the fuse off at an angle first. It exposes more of the powder to the flame. MJG also has new visco shroud igniters that you might want to try out.
Nice vid man. I live near Denver myself (centennial). Can anyone point me in the right direction to find some better cans. I go to the Wyoming border, the phantom and pyro stores. I haven't been to the other ones up there but those two stores have the same Crap every year and basically none of the stuff on this video and the idiots that work there for the season don't know anything. Any tips on where to go for other brands in or near Colorado. Do the other few stores up there have better selection or do you order online. Specifically salutes which i can't find anywhere. The only thing I found that I was looking for is some of those whistling sonic cans. Sub to my fellow Coloradan
What's going on pyro! I appreciate the support from another Colorado pyro! DM me on IG, I can certainly point you in the right direction. Definitely want to stay away from phantom at all costs.
where at in colorado do you get away w doing this? cause i always got busted for shooting them in elizabeth
I wouldn't say i "get away with it". I just dont light stuff off long enough for any cops to come around. And I've been lucky my neighborhood is mostly cool with it. Some of the bigger demos or comparison videos that require time, i shoot out in an open parking lot away from any buildings to avoid the attention.
Do you have some Black Cat neon Diablo shells
I do not have those unfortunately.
Is the geisha kobushi same as the reg geishas
What y’all think about the kobushi
They are a different shell. I have not personally fired the Kobushi.
@@MileHighPyro-303re they different? I haven’t shot kobushis personally but I thought Red Apple sells those packs of 6 shells that are just ripped straight from the full 24 kit. Since the full kits are divided into 4 main effects, you can buy just 6 of the effect you want. Example, Kobushi is Geisha kit split into the 4 groups, Sugar Skulls is Bombas split into the 4, etc. The effects on the box from 6 pack to full kit are identical I believe. You could be right though, they may not just be rewraps. I’ve never tried any outside the main kits.
Can u dou a demo on death shelles bro?
I don't have those. I'll have to try to track some down.
@@MileHighPyro-303 tank u my friend
Have u been at Hannibal Missouri the super firework store?
I have not, that is definitely on my bucket list. Might make the drive this fall.
@@MileHighPyro-303 u well love this place
Anarchy black any louder than the white?
They are , but not by much. Honestly when factoring in cost, anarchy white hands down.
Anarchy white n black pretty much the same.
Pretty close for sure. I would say the value is in the anarchy white.
You shouldn't use those type on the shells. Use the ones the clip on the fuse. The ones you used are made for cakes.
I agree talons work better for shells and rockets. But these igniters should work as well, just a little more finicky.
6, 7, and 8 inch shells. 🤣
No 8", 7" is already excessive for consumer canister shells. Lol
So you don't know about the master series...
@@JDPyrotechnics I am fully aware of the Master series. I've been a pyro for 50+ years.
I know it’s easier but don’t use clip ons they suck honestly, unless you v cut the fuse where you insert the clip.
There’s a good video on here how to do canister shells that will help a lot
Clipons actually work better for shells and rockets. Short of sticking the MJG directly into the lift.
I'm actually curious to see that. Do you have a link.?
@@MileHighPyro-303 that’s what you’re supposed to do is stick it directly into the lift from the bottom.. you make a small slit at the very bottom and insert igniter then you tape the bottom back with a spot for the igniter to rip out without pulling on the shell
@@MileHighPyro-303 ruclips.net/video/WK0c-4WD_-I/видео.html