Agreed. Enphase sent me a video from 2020 that doesn't match my app at all. I then found this one, but it's out of date, too. Is there not a video that shows how the current version of the app works???
Next thing to do is to install small public/municipal power plants in residential areas to convert the excess solar power generated into hydrogen and use it backwards to generate electricity when not enough solar power is generated. This makes the grid voltage more stable, less ampere load through the grid cables, so thinner cables are needed, saving grid costs and fuel and less pollution. Spread the word, the government doesn't do anything because of the oil barons who only want to make more money by controlling the energy marked more and more.
My app is not showing consumption or grid dependency. Yesterday I was seeing 8 hours of battery at dusk and a 17% grid consumption. Now I'm only seeing the production from the system. I can't tell if I'm on an old version of the app or what.
Hey there! that's actually because your system isn't equipped with consumption CTs or may be they aren't enabled in Enlighten. Coz, that's what is responsible to show grid dependence or say consumption.
I got no real data for over 24 hours. I called my installers Service Dept and by the time they got back to the next my app UPDATED itself and was showing solar production with the nifty graphics. But under GRID it says "IDLE". So I'm guessing I will need some more CT's installed. I have requested a quote. About how much should that cost? I wish they had told me that upfront, I would have added that feature to my order, as I did for the Critter Guards.
I now have control of a system that my father on his house. I find these panels in the system to be a waste of money. Five years after install my micro inverters turned out to be a crappy version. It took my installer another five years to get them running. I bet it takes another 50 to see a return on investment.
We used to have the panel monitoring system from the SunPower. They took it away. ruclips.net/video/yl-KSR1_HR4/видео.html Now Enphase is trying to sell their monitoring system $669 in order to honor their warranty.
The app has a built in demo that simulates an enphase system with storage. You can explore the features of the app if you don't have a live system to log in to. This can be useful to learn what kind of information your app can provide before your install is commissioned. If you have your own commissioned system, you can exit the demo mode in the app to log in to your live system.
@@abisolaabisola7357Could you please help me with your side so that I can review your system? Looks like you do not have production and consumption CTs enabled that is the reason it looks different.
@@abisolaabisola7357make sure you have downloaded Enphase Enlighten app. If the app is not showing import, export and consumption let me know I can fix that for you.
My app is completely different. This information is useless to me. Not one thing in my app matched this video.
Could you explain bit more about your app?
I agree. Not easy to use. Understatement!!
Why is my main screen different ? It doesn’t show how much I’m consuming. Just the production
your installer has either not installed consumption monitoring CTs or has not enabled it in the settings. Contact them and ask.
same
Agreed. Enphase sent me a video from 2020 that doesn't match my app at all. I then found this one, but it's out of date, too. Is there not a video that shows how the current version of the app works???
Help me with your site ID, I will get that sorted for you
@@ChristopherMaselli I’m having the same issue.
Next thing to do is to install small public/municipal power plants in residential areas to convert the excess solar power generated into hydrogen and use it backwards to generate electricity when not enough solar power is generated. This makes the grid voltage more stable, less ampere load through the grid cables, so thinner cables are needed, saving grid costs and fuel and less pollution.
Spread the word, the government doesn't do anything because of the oil barons who only want to make more money by controlling the energy marked more and more.
My app is not showing consumption or grid dependency. Yesterday I was seeing 8 hours of battery at dusk and a 17% grid consumption. Now I'm only seeing the production from the system. I can't tell if I'm on an old version of the app or what.
Hey there! that's actually because your system isn't equipped with consumption CTs or may be they aren't enabled in Enlighten. Coz, that's what is responsible to show grid dependence or say consumption.
I got no real data for over 24 hours. I called my installers Service Dept and by the time they got back to the next my app UPDATED itself and was showing solar production with the nifty graphics. But under GRID it says "IDLE". So I'm guessing I will need some more CT's installed. I have requested a quote. About how much should that cost? I wish they had told me that upfront, I would have added that feature to my order, as I did for the Critter Guards.
The app must have been updated since this was released….
This video doesn’t match the Enphase Enlighten App I just downloaded.
This doesn’t look like mine. Mine barely has any information
Make sure you have logged in with your registered email address. You should be able to see production, Energy, and Array map
I now have control of a system that my father on his house. I find these panels in the system to be a waste of money. Five years after install my micro inverters turned out to be a crappy version. It took my installer another five years to get them running. I bet it takes another 50 to see a return on investment.
Don't be silly. Solar panels only have a 25 year life span. The whole thing will be in the land fill in 50 years.
can I use this app if I choose a battery back up (enphase encharge 10) with no pv system?
HOW DO YOU CHANGE/UPDATE THE CURRECNCY EQUIVALENT?
Go to settings, then press performance. You can edit it there. If you have done so yet.
My app is totally different ?!😢
We used to have the panel monitoring system from the SunPower. They took it away. ruclips.net/video/yl-KSR1_HR4/видео.html
Now Enphase is trying to sell their monitoring system $669 in order to honor their warranty.
Sarebbe bello che lo stesso video fosse anche Italiano
Why does my screen only show this is a demo app?
The app has a built in demo that simulates an enphase system with storage. You can explore the features of the app if you don't have a live system to log in to. This can be useful to learn what kind of information your app can provide before your install is commissioned. If you have your own commissioned system, you can exit the demo mode in the app to log in to your live system.
@@MooseTurder My issue has been corrected. Thank you
@@msbjoy how did you correct it? Any thoughts would be appreciated
@@SD-in2mv I called Enphase and discovered they were never notified of my installation.
Make sure you have logged in with your registered email address and your account has been activated completely
If anyone is facing any issues with the Enphase app let me know I will try to solve your queries.
This app is different than my app on my iPhone
@@abisolaabisola7357Could you please help me with your side so that I can review your system?
Looks like you do not have production and consumption CTs enabled that is the reason it looks different.
Site ID -4173395
Can you please tell me if this system is communicating and producing as it should be
@@abisolaabisola7357make sure you have downloaded Enphase Enlighten app.
If the app is not showing import, export and consumption let me know I can fix that for you.
1:24
This company sucks ,everything from them sucks nothings works correctly
Real useless information