3 Table Saw jigs & some important lessons.
HTML-код
- Опубликовано: 12 сен 2024
- These jigs and tips will make you a better woodworker overall!
▼EXPAND THIS SECTION FOR MORE RESOURCES RELATED TO THIS VIDEO▼
Links promised in this video:
Handy table saw fence clamps: amzn.to/2X4SM5m
Grippy push blocks: amzn.to/3v3OZC1
Video about setting up a dado set: • Are you setting up you...
-More videos on our website: stumpynubs.com/
-Subscribe to our e-Magazine: stumpynubs.com...
-Check out our project plans: stumpynubs.com...
-Instagram: / stumpynubs
★THIS VIDEO WAS MADE POSSIBLE BY★
Clear Vue Cyclones (Use coupon code NUBS5): www.clearvuecyc...
Please help support us by using the link above for a quick look around!
(If you use one of these affiliate links, we may receive a small commission)
★SOME OF MY FAVORITE CHEAP TOOLS★
-123 Blocks: lddy.no/vpij
-Mechanical Pencils: amzn.to/2PA7bwK
-Lumber pencil: amzn.to/2QtwZjv
-Pocket Measuring Tape: amzn.to/2kNTlI9
-Irwin Drill Bit Gauge: amzn.to/2AwTkQg
-Nut/Bolt/Screw Gauge: amzn.to/2CuvxSK
-Self-Centering Punch: amzn.to/2QvbcrC
-Self-Centering Bits: amzn.to/2xs71UW
-Angle Cube: lddy.no/10nam
-Steel Ruler: lddy.no/10mv7
-Utility knife: amzn.to/3nfhIiv
-Center-Finding Ruler: lddy.no/10nak
-Bit & Blade Cleaner: amzn.to/2TfvEOI
-Digital depth gauge: amzn.to/3mwRf2x
-Wood Glue: amzn.to/3mqek6M
-Spade Bits: amzn.to/3j8XPtD
★SOME OF MY FAVORITE HAND TOOLS★
-Digital Caliper: amzn.to/384H1Or
-Marking Gauge: lddy.no/10muz
-Marking knife: lddy.no/10mv0
-Narex Chisels: lddy.no/sqm3
-Stanley Sweetheart Chisels: amzn.to/3y5HDOc
-Mini Pull Saw: amzn.to/2UEHBz6
-Gent Saw: lddy.no/ss2x
-Coping saw: amzn.to/2W7ZiUS
-Shinwa Rulers: lddy.no/zl13
★SOME OF MY FAVORITE POWER TOOLS★
-Miter Saw: amzn.to/3gqIlQ8
-Jointer: amzn.to/3yc3gfZ
-Planer: amzn.to/3mn6BGF
-Router: amzn.to/3grD22S
-Sander: amzn.to/3DdvD0Y
-Cordless drill: amzn.to/3D9ZiIm
-Brad nailer: amzn.to/3gsRkjH
-Mini Compressor: amzn.to/3mvrmQr
-Bladerunner: amzn.to/2Wl0TtJ
-Jig Saw: amzn.to/3zetTBY
-Scroll Saw: amzn.to/3gq9qDc
-Multi-Tool: amzn.to/3muZuMi
★SOME OF MY FAVORITE OTHER TOOLS★
-Drill Bits: amzn.to/3B8Ckzh
-Forstner Bits: amzn.to/3kk3wEI
-Shop Vacuum: amzn.to/2Wkqnbl
-Machine Setup Blocks: amzn.to/3gq7kDh
-Counter-Sink Bit: amzn.to/37ZukUo
-Featherboard: amzn.to/3DeqHsq
-ISOtunes Hearing Protection (Save $10): bit.ly/3BHYdH7
(If you use one of the affiliate links above, we may receive a small commission)
![I'm fully satisfied with this VERTICAL HOLDING JIG that I use most frequently [woodworking]](http://i.ytimg.com/vi/xrT5hdw8i9I/mqdefault.jpg)
▼EXPAND THIS SECTION FOR MORE RESOURCES RELATED TO THIS VIDEO▼
*Links promised in this video:*
Handy table saw fence clamps: amzn.to/2X4SM5m
Grippy push blocks: amzn.to/3v3OZC1
Video about setting up a dado set:ruclips.net/video/KPYXUe1q9yM/видео.html
-More videos on our website: stumpynubs.com/
-Subscribe to our e-Magazine: stumpynubs.com/browse-and-subscribe/
-Check out our project plans: stumpynubs.com/product-category/plans/
-Instagram: instagram.com/stumpynubs/
★THIS VIDEO WAS MADE POSSIBLE BY★
Clear Vue Cyclones (Use coupon code NUBS5): www.clearvuecyclones.com/
*Please help support us by using the link above for a quick look around!*
(If you use one of these affiliate links, we may receive a small commission)
★SOME OF MY FAVORITE CHEAP TOOLS★
-123 Blocks: lddy.no/vpij
-Mechanical Pencils: amzn.to/2PA7bwK
-Lumber pencil: amzn.to/2QtwZjv
-Pocket Measuring Tape: amzn.to/2kNTlI9
-Irwin Drill Bit Gauge: amzn.to/2AwTkQg
-Nut/Bolt/Screw Gauge: amzn.to/2CuvxSK
-Self-Centering Punch: amzn.to/2QvbcrC
-Self-Centering Bits: amzn.to/2xs71UW
-Angle Cube: lddy.no/10nam
-Steel Ruler: lddy.no/10mv7
-Utility knife: amzn.to/3nfhIiv
-Center-Finding Ruler: lddy.no/10nak
-Bit & Blade Cleaner: amzn.to/2TfvEOI
-Digital depth gauge: amzn.to/3mwRf2x
-Wood Glue: amzn.to/3mqek6M
-Spade Bits: amzn.to/3j8XPtD
★SOME OF MY FAVORITE HAND TOOLS★
-Digital Caliper: amzn.to/384H1Or
-Marking Gauge: lddy.no/10muz
-Marking knife: lddy.no/10mv0
-Narex Chisels: lddy.no/sqm3
-Stanley Sweetheart Chisels: amzn.to/3y5HDOc
-Mini Pull Saw: amzn.to/2UEHBz6
-Gent Saw: lddy.no/ss2x
-Coping saw: amzn.to/2W7ZiUS
-Shinwa Rulers: lddy.no/zl13
★SOME OF MY FAVORITE POWER TOOLS★
-Miter Saw: amzn.to/3gqIlQ8
-Jointer: amzn.to/3yc3gfZ
-Planer: amzn.to/3mn6BGF
-Router: amzn.to/3grD22S
-Sander: amzn.to/3DdvD0Y
-Cordless drill: amzn.to/3D9ZiIm
-Brad nailer: amzn.to/3gsRkjH
-Mini Compressor: amzn.to/3mvrmQr
-Bladerunner: amzn.to/2Wl0TtJ
-Jig Saw: amzn.to/3zetTBY
-Scroll Saw: amzn.to/3gq9qDc
-Multi-Tool: amzn.to/3muZuMi
★SOME OF MY FAVORITE OTHER TOOLS★
-Drill Bits: amzn.to/3B8Ckzh
-Forstner Bits: amzn.to/3kk3wEI
-Shop Vacuum: amzn.to/2Wkqnbl
-Machine Setup Blocks: amzn.to/3gq7kDh
-Counter-Sink Bit: amzn.to/37ZukUo
-Featherboard: amzn.to/3DeqHsq
-ISOtunes Hearing Protection (Save $10): bit.ly/3BHYdH7
(If you use one of the affiliate links above, we may receive a small commission)
James, why is that particular shop vac on the list your favorite?
@@alberttreado3713 Because it's the one I have and I like it. I am sure others are fine, as well. But I can only recommend what I personally use :)
@@StumpyNubs I just thought you might be more inclined towards the larger unit they offer. The peak ( I know it means squat) hp and running hp is higher, and it’s quieter. Maybe the subject of a video? Im really confused about which to get. I have an older Ridged I’d like to replace, but given my space limitations your smaller unit might be a better option.
@@alberttreado3713 Horsepower is meaningless. I refuse to believe my shop vac has a motor more than three times as powerful as a typical router or table saw. They fudge those tests every way imaginable. Size is a minor consideration because I like to use a mini-cyclone with it, so dust doesn't go into the vacuum anyway. Sound level is a factor worth considering. Might be an interesting subject for a video...
Let's Go Redwings. Thanks for these valuable tips.
Excellent video. When I'm sneaking up on the final cut I call it, "Tickling the wood." lol
I would like to thank you James, I recently bought an entry level table saw. It’s mitre slots are totally different to all the saws on RUclips, but with hints and tips from stumpy nubs channel and Steve Ramsey I’ve been able to set up the saw and made my first cut yesterday. A 4 foot long rip cut in 9mm ply, you guys make it look so easy. After many practice passes I successfully cut 6 inches off the length of the wood. Why have I waited so long for this tool, it’s amazing.
You sound like a guy that doesn't consider 5" 31/32 to be six inches. I have no idea what else you might be but I think you'll do well with precision work.
I purchased my first table saw ~3 months ago. Videos like this are an absolute godsend for the beginner woodworker. I also question why it has taken me 10+ years to finally buy a table saw ... Honestly, if I could tell new starters (like me!) one thing it's that it should be in the list of first tools to get.
I wish I could spend a YEAR with you to learn some of the knowledge you share with us !! Thank you so much for all you teach us !!
Marking the centre of the blade on the insert is such a simple idea, but I have never thought to do it. I'll be putting that to rights first thing tomorrow.
I read this in my head as Mike Tyson...I'm still chuckling at it
wow this is a gamechanger. thank you so much for the share.
Good morning from Ohio James. Although I've been a woodworker for a very long time I never get tired of hearing the basics. Thanks.
Marking the center of the table saw blade is something I’ve never thought of. That was a fantastic tip.
Adding tape to your fence for fine adjustments is a fantastic idea!
I watched another guy make a very similar jig but he used the exact wrong technique to cross-cut with the board against the fence. Amazing. Glad I found you James.
Thanks for explaining why it was okay to use both miter and fence while cutting the outside rabbit! Blessings!!
Another good one. Thanks. Ever thought of a series on "what did I do wrong?" Giving help and commentary on subscriber's video/photos?
Well done! Test cut and ease up to the final size! Thank you for the time you take in sharing you methods of table saw skills!
Old beginner here, and while I'll need to watch the video multiple times, thank you for showing the safest, and most accurate way to make these joint cuts. Although I enjoy watching fancy woodworking project video. I always come back to you for the safest and most accurate way to work.
Thank you for advocating making a test cut. So many other channels brag about how accurate they set up their rip fence is try to prove by quickly moving it to a measurement, lock it down and make the cut with out verifying the distance with a test cut. I always wonder how many times they cut that piece only to find out is was not cut to the proper measurement. You never see that in the final edit. Most wood workers have scrap wood, yes I said that out loud. Admitting we have a problem is the first step. We always have scrap for a test cut. Besides, with the cost of sheet goods these days, why not take the time to make a test cut. More cost effective in the long run. Another great video, thank you.
If you cut enough rabbets, you can eventually get a rebate! Great tips Stumpy!
My grandfather was a joiner who apprenticed in the Glasgow shipyards before coming to the USA in 1923. He always told me to "Work to the wood, not the rule". Still good advice.
I really like that you made a video about this. It's true. I started with a half lap...but that process honestly upped my game.
These videos are really well put together -not amateur in any way.
Amazing great videos. Thank you! I like all your work, not just this one. It shows that you have experience, unlike the other youtubers who make a living with making videos, not with woodworking.
This was awesome. It made something that is kind of intimidating ( at least to me) really approachable. the whole idea of "sneaking up" on a cut is something that I have been doing in other settings, but I thought that it was because I was bad at cutting. Seem like more of a strategy now.
Dear Stumpy Nubs, thank you for your channel. Its honest and informative and I enjoy all your videos, again, thank you, Michael from England.
I could have used the masking tape tip this week! It’s in my brain now, I won’t forget, thanks!
Love your channel
I've commented before and I've always meant to say this. You are a great teacher!! Thank you!
These are some of the best tips, because every base I can think of is covered here. My table saw isn't powerful enough to kick back - it will just stall, UNLESS a small piece falls between the blade and the throat plate, then be alert and stay clear!. But just taking into consideration the concept of the sacrificial fence for this purpose, a concept I've heard before but not in this context, helps me get better at what I might be doing down the road. This is what excites me about getting more into woodworking. It's the little tricks that the tool manufacturers don't tell you about.
As a high school wood shop teacher I show the students how to cut rebates and lap joints as an intro to tenons. I liked this video due to the fact that there are things you say that are almost exactly how say them to my students. Keep up the good work!
Mating rabbits. You’re bound to have thousands of bunnies hopping around your shop
Great videos man.
I think he said "just a pair of Mating Rabbits which means double your number..............:)
Thank you!! I have cut dado's and rabbets and either not enough cut or just a bit too much. Going to use the tape trick. Another educational and informative video.
I may have missed it last video (or so), but congrats on 600k, James. And thank you for the excellent tips.
Great video!
Thanks for explaining why it's ok to use the dado set with both the fence and miter sled. You answered the question while it was forming in my head
Mr. Rogers meets Al Borlan meets the guy narrating my life. Good video.
Very helpful!
Simple, direct, and smart.
Excellent tips, James. Thanks so much for sharing these.
This is such a good video 🙌 Your time and energy that you put into these videos is much appreciated. As a woodworker, I am always looking to improve my techniques and be as efficient as possible without sacrificing quality. You always either confirm that I am doing something correct or give me something new to try. Thank you! 🙏
Great video. The hard part for a lot of us small shop guys is that our contractor table saws just don't have the quality fences that a professional cabinet saw does, and man is it hard to make jigs with no play when your fence has a lower tolerance for its manufacturing specs. My DeWalt fence, while pretty darn good for a contractor saw, has a slight little dip in the middle. It isn't a huge deal for normal rips or anything, but on jigs that ride the fence I always have trouble, as in the very middle it has some play.
James Hamilton has presented another great video filled with practical tips for all woodworkers. After over a half century of woodworking I agree with everything presented. However, even when using the single blade method I prefer to cut my dados close to the fence. I believe this method gives greater control over the cut and the workpiece can't spin out and ruin the cut. although the masking tape trick won't work in that position, you can still start narrow and sneak up to the width of the dado. In any event, I always make test cuts on a scrap piece before running my actual stock through the blade or dado set.
Fantastic instructions, thanks for helping out all the newbies getting into woodworking
Excellent video as always. I am so thankful you have a channel.
Great video and I've made a bunch of rabbit and dado cuts in my time. I'll be making a couple of those jigs.
Really great tips, James! Thanks a lot! 😃
Stay safe there with your family! 🖖😊
Thanks. You again make something difficult a simple and accurate task. I enjoy your channel
Stunning helpful, James. Thank you very much.
I followed you design and made a jig like this for myself. It helps a lot when making lap joins or notch out. Since I got a job site saw, I double up on the support piece on the right so it doesn't fall into the mitre track. Also it gives it little more stability since the my table saw fence is very narrow.
Every time I see you talk about rabbets I remember your "Of Mice and Men" impression.
Hola! 🖐 Really good video, the masking tape tip is awesome!! Thanks for sharing your knowledge and making these videos, please keep them coming. Take care and have a good one, Adios! 🖐
I’ve been a woodworker for over 40 years, and you never fail to teach me something I didn’t know. Thank you!
Great tips..!!
Most excellent presentation. Concise, logical, applying theory to practical skills... good job!
Tom Byrne
Thanks for sharing with us James, good information really helps after being away from the table saw for a good while. And for misplaced jigs 🤗. Stay safe and keep up the good work and videos. Fred. 🙏🏻🙏🏻👏🏻👏🏻👍🏻👍🏻✋🏻✋🏻
As always, very useful to-the-point info, well presented and still enjoyable to watch. The 3 amigos jigs are must haves if you do any real joinery on the table saw. Thanks much, again!
Shhh! Be vewy vewy kwiet. We're hunting rabbets!
Just another great tip. I really like the tape tip never have thought about that, great idea👍. Keep the ideas coming.
Despite being in Australia, where we call them Grooves and Rebates, I got interested in woodworking from watching youtube videos, and since the majority of woodworkers on here are American, picked up the US lingo instead.
Have you checked out DIYforKnuckleheads ? Great Aussie woodworker that I enjoy watching. Knowledgeable and pretty funny.
That "Pask Makes" guy on RUclips is in Australia too. Always picking up cool tips from his vids.
'Boards' instead of 'planks'? I arsk ya!
You a man of sophistication, makes jigs for cutting rabbets on the table saw. Me, a caveman, uses a hand router.
"Half laps are just a pair of mating rabbits."
Thanks so much for that great education, amazing
I didn't even know Rabbits could use Table Saws!!
No bunny knew that they could.
Guys guys... Let's not split hares over this.
@@pawpawstew 🤣🤣🤣
Hilarious. What a comedian
You can get a nasty kick-back from a rabbit too!
This video gets saved to my “woodworking how to” playlist. Great vid, thanks.
Nice info thankyou
Another fantastic video. You guys are doing great work, I always learn so much.
Good food for thought. I have been attempting to do some bowl segmentation, and I had the first jig that you cut the segments with the rest was just a afterthought. Not any more, I did a bowl, it had gaps between layers, even though I had made a sanding wheel for my lathe. Why the gaps, when cutting the segments where there was no support for the material, the blade was of course pushing the pieces back just enough to screw up the angles and it warped. So wasn't put some clamps on it to hold the material and now they are almost perfect. Which led me to make the zero clearance table saw insert and a beveled piece that goes next to the blade so the cut off pieces will fall away from the blade. Your right making the right stuff for the job is paramount, and I am being a bit more smarter. Sorry for the dissertation, but I am happy that I followed the process, now my bowls will look better.
Thanks for another useful video.
I like my Incra fence. Built in micro- adjust.
Very helpful. Thank you!
Great tips again.
I really love this video for so many reasons….one essential point that could easily go unnoticed is the benefits of marking the location of the apex of the blade…can you please explain In some more detail how you go about finding the apex of the tablesaw blade? It’s not the center point of the opening of the throat plate on my ridged saw, thanks! Rob
YOU GET A BIG THUMBS UP ON 👍 THIS ONE. KEEP THEM COMING
Thanks again James!
Great lesson James, thanks for sharing it.
Thanks 👏👏👏
Rabbet / rebate? The great dabbet / debate!
Great video and thanks for sharing. I’m in the process of making a bookcase for my daughter and I need to cut some rabbits on the case pieces to hold a back panel. While I do have a dado blade and have it set up for some reason my table saw doesn’t seem to be staying at the set height so I’ve been thinking about using my trim router with the fence. However, I might try making a fence for my saw and trying the rip blade double cut method.
this is great
Sometimes, if I only have one or two rabbets or dados to make, I'll just use the "nibble" method, but if you have a reasonably decent table saw it's worth the expense to buy a good quality stacked dado set. I also have a dedicated sled with a wide cut-out for the dado cutter.
Thanks Jim.
All thru the video, all I could hear was Samuel L Jackson: "How do you catch a unique rabbet? Unique up on it! How do you catch a tame rabbet? The tame way. Unique up on it!"
GOLD
Thanks!
Is this what is referred to as a rabbet hole
Great content!!
That double cut method looks a bit sketchy in my humble opinion, but it definitely looks as useful as tp on a road trip!
Thank you for the technical skills and the relationship association to the wide world of rebates! I mean rabbits 🐇. Wait. Eh, you know what I mean…. Grooves
traduccion a varios idioms youtube es universal
Rebates are way faster than rabbits.
You are amazing
Just a question. Why no featherboards?
This is great, But Can You Turn on the Subtitles ?
I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.
Shhhhh, We’re hunting wabbits and their berry sneaky. 👍
Thanks agin
👍🏻👍🏻👍🏻 thanks
that safety tip at 4:43, take note, it happened to me recently. Hit me not too hard in the abdomen, but could have been worse. Will never make that mistake again.
Re: Masking tape shim.
I also have playing cards and business cards and post-its scattered around the shop for consistent shimming.
what do you mean when you say you use a tape?
im just curious... you apparently have a great deal of knowledge on woodworking. did you write those books behind you? it seems to me that you wouldnt need to read anything about it. :)
Mating rabbets 🐰🐇🤣
Your my boy blue