Best video I've seen so far. Your truck & kit are like mine. Going on a 2000 Ford F250 4x4 V-10. Will start in on it tomorrow. Thanks for making the vid, it helps!✌️🇺🇲
@tonyrhoton6613 ... I didn't order the compressor model. But the airbag system kit in itself works great. I fill the bags with my portable 12Volt compressor.
I know this is an older video, but did you have to do anything special with the frame mounted pads for the overload springs when going to the 2011 springs? In otherwords, do the 2011 upper overload springs properly hit the rubber mounts on the frame when you have a heavy load?
You lower brackets one's correct and the other side is the opposite way??? The first one you installed was wrong but you got it right on the second one... You should upload a video of the bags inflating and deflating...
Did this make it actually ride any better I have a 350 dually that rode nice until I stuck 550 springs under it now the thing rides extremely rough unless I'm pulling a load lol I've been looking to see if this air ride stuff might help with the quality of the ride
You’ll never get “ Quality “ ride period! Those 550 springs are your problem. I would have stayed with the 350 spring, and just went airbags. If your needing the “ Capacity “ of a 550, you need a bigger truck period.
Best video I've seen so far. Your truck & kit are like mine. Going on a 2000 Ford F250 4x4 V-10. Will start in on it tomorrow. Thanks for making the vid, it helps!✌️🇺🇲
Sure thing
How they doing
@tonyrhoton6613 ... I didn't order the compressor model. But the airbag system kit in itself works great. I fill the bags with my portable 12Volt compressor.
I know this is an older video, but did you have to do anything special with the frame mounted pads for the overload springs when going to the 2011 springs? In otherwords, do the 2011 upper overload springs properly hit the rubber mounts on the frame when you have a heavy load?
@@alexrossmann7672 I didn’t go with 2011 springs. I went with 2011 & up Leaf spring hardware
@@PowerstrokeBoiz I appreciate the response. You should do that mod next!
You lower brackets one's correct and the other side is the opposite way??? The first one you installed was wrong but you got it right on the second one...
You should upload a video of the bags inflating and deflating...
Haha I know! I went back next day and fixed that! Drove me crazy while I was editing the video lol
With the airbags, did you keep your stock shocks? Or what was your upgrade for the shocks?
Oh no not stock lol….these are Gabriel Premium shocks I spec’ed with them. Trucks lowered 4” in the back
Great video planning on replacing my old Firestone airbags 1999.5 f250 7.3 👊🏼
I like your tattoo
Did this make it actually ride any better I have a 350 dually that rode nice until I stuck 550 springs under it now the thing rides extremely rough unless I'm pulling a load lol I've been looking to see if this air ride stuff might help with the quality of the ride
You’ll never get “ Quality “ ride period! Those 550 springs are your problem. I would have stayed with the 350 spring, and just went airbags. If your needing the “ Capacity “ of a 550, you need a bigger truck period.
Will the kit work in a truck with bed hitch?
Yes! I have a BW1108 in my truck currently. I had to modify the brackets but it works with my truck being lowered!
How did you lower your truck?
Shackles, & no blocks
@@PowerstrokeBoiz how much for the unused blocks 😃
@@DeepSouthBayouDiesel 50$? Ship on your expense lol
@@PowerstrokeBoiz I was joking with you bubba, but perhaps someone will actually take you up on that offer🤷♂️ I'm doing a 2 inch lift on my 02 7.3 😎👍
Where’s the link to the kit?
Go to there website and verify your specific application. Why I didn’t post a link
@@PowerstrokeBoiz ok cool thank you
@@billybob3045Honestly best way to be 100% sure