Great video! I just purchased this same bike from Aldi, of all places, for $249 bucks. I was seriously looking at Peloton bikes, but at $249 bucks, I could not go back to looking at Peloton. It's a new year and I was in the market for a bike anyway, so I think I'm good now...Plus, your video made me feel good about my purchase, so there i that too! Big thumbs up!
Thanks for the overview. I just got the same bike at WM too. Are you streaming Spin videos from YT or using an app like Les Mills / Peloton ? I was wanting to do the latter & hook up the most appropriate sensors to input speed / RPM / cadence data so as to upload to app or Ride track site like Strava or Zwift. Thanks in advance - Regards - David
I was thinking of going with a new sensor and tracking it via Strava but I ended up just going old school and using my iPhone and timer. I do a variation of a HIIT workout; 3 min easy warm up pace, 10 min fast/intense, 5 min at a slow/resting pace, then another 10 minutes of hard resistance at fast pace. I burn my legs pretty good with this and when I get on my real mtn bike it’s smooth sailing. Don’t forget to do some calf raises as well. Have fun and enjoy the burn!
@@OGAdam Can you recommend a specific model of sensor/tracking device to replace the one that comes with the bike? Because that one is of no use to me.
That’s the only thing about the bike that I don’t recommend is the included LCD. I would go with a Wahoo Cadence Sensor for a simply setup without adding any more $ to the total cost of the bike.
This particular model does not connect to iFit. I know that Sam’s Club and HSN has a 505 SPX (Grey) so that might be a newer model. The LCD on this one is very basic if that. The “Reed Switch” attaches to the fork and tracks the flywheel via magnet. Again the LCD screen is similar to an old school Casio watch that I don’t even bother using. You can download iFit on your device and just use it for the workouts but it will not sync with this model.
It’s actually just sitting on a workout mat that can be purchased anywhere. It’s the foam type with the jigsaw puzzle ends to adjust the size. As far as moving the bike while on the bike, no it will tear the mat. You’ll need to lift the bike off first.
Hello, I just purchased this bike and my right crank arm hole is stripped and the peddle will not stay in. Do you have any recommendations on how to fix this?
Just make sure that you’re turning the pedal in the right direction. It’s not the usual clockwise turn for pedals. They are marked L and R as well so double check that. If the crank arm is stripped then returning the bike would be the best solution.
How low can the seat go? (In inches) I am 4' 11" and I can't find seat height/ inseam measurements on any website that sells this bike. (Including the pro-form website itself)
Do you have any idea how I can get taller handlebars for this thing? I'm 6' 4" and I've tried adjusting my seat everyway, but I keep kicking myself with my knees...
Have you adjusted (pulling the front knob under the handlebar and raising the handlebars up) and raising the seat? The handlebars are designed to ride low like a road bike with dropbars so maybe pull the seat up and out towards the rear of the bike. Maybe that will give you more space for your knees.
I'm 5"8 and those handlebars are too low and because of this I had to lower my seat which hurts my knees. Still I'm bent over and a lot of pressure on my shoulders. Not a fan of this bike.
I bought this bike and was super-excited to do my first workout with iFit. But the bike seat is literally murder. LOL. Can you recommend a specific replacement for people who are not avid bike riders?
Great video! I just purchased this same bike from Aldi, of all places, for $249 bucks. I was seriously looking at Peloton bikes, but at $249 bucks, I could not go back to looking at Peloton. It's a new year and I was in the market for a bike anyway, so I think I'm good now...Plus, your video made me feel good about my purchase, so there i that too! Big thumbs up!
Congrats on the new bike and Happy New Year!
@@OGAdam Thank you very much, my friend! Happy New Year to you as well!
Same here, Wanted a peloton and saw this at Aldi, why not! But I can see myself upgrading in the future
I'm getting one also from aldis
@@luisolivera2029 Better hurry! These things go fast and they don't return when they're gone!
Just purchased one can’t to get started. Great review.
Congrats! It’s a great bike
gracias por la reseña amigo fue de mucha utilidad saludos desde Mexico
As of 2 days ago it is $202 at Aldis on clearance😊
Where are you located? I’m in Chicago and it’s $260 here. Even though it’s a good price already I almost feel like I should wait.
@@aTwistedSista i got mine in Houston for $202 on 01/18/22
@@aTwistedSista I just got mine at Aldi for $202. I was just buying some milk and I saw this bike... Chicago area.
$270 Aldi in Palm Beach.
Just got mine yesterday at Aldi for $67 on clearance. Oxnard CA.
Can you clarify what is the weight limit is on this?
250 lbs.
Do you know how to change the resistance on this bike ?
just turn the knob counter clockwise to lessen or clockwise to increase resistance
Thanks for the review! Does this need to be plugged in?
The bike does not need to be plugged in, just hop on and pedal
Awesome! Thank you! I wanted to use this in the garage, but don’t have an outlet. This seems perfect!
Thanks for the overview.
I just got the same bike at WM too.
Are you streaming Spin videos from YT or using an app like Les Mills / Peloton ?
I was wanting to do the latter & hook up the most appropriate sensors to input speed / RPM / cadence data so as to upload to app or Ride track site like Strava or Zwift.
Thanks in advance -
Regards - David
I was thinking of going with a new sensor and tracking it via Strava but I ended up just going old school and using my iPhone and timer. I do a variation of a HIIT workout; 3 min easy warm up pace, 10 min fast/intense, 5 min at a slow/resting pace, then another 10 minutes of hard resistance at fast pace. I burn my legs pretty good with this and when I get on my real mtn bike it’s smooth sailing. Don’t forget to do some calf raises as well. Have fun and enjoy the burn!
@@OGAdam Can you recommend a specific model of sensor/tracking device to replace the one that comes with the bike? Because that one is of no use to me.
That’s the only thing about the bike that I don’t recommend is the included LCD. I would go with a Wahoo Cadence Sensor for a simply setup without adding any more $ to the total cost of the bike.
@@OGAdam Does the current sensor connect via bluetooth? Or how are you suppose to connect to the iFit app?
This particular model does not connect to iFit. I know that Sam’s Club and HSN has a 505 SPX (Grey) so that might be a newer model. The LCD on this one is very basic if that. The “Reed Switch” attaches to the fork and tracks the flywheel via magnet. Again the LCD screen is similar to an old school Casio watch that I don’t even bother using. You can download iFit on your device and just use it for the workouts but it will not sync with this model.
What size pedals are they? 9/16 ? I want to switch them out for clip ins
Yes, they are standard 9/16 most pedals will fit
How's the bike holding up? Still Happy with it?
Still solid! Just wipe it down with WD40 every so often and it’s good as new
I'm curious about the cart that you have it sitting on--what kind of cart and can you use the bike while on the cart or do you have to move it off?
It’s actually just sitting on a workout mat that can be purchased anywhere. It’s the foam type with the jigsaw puzzle ends to adjust the size. As far as moving the bike while on the bike, no it will tear the mat. You’ll need to lift the bike off first.
@@OGAdam Thank you!
You’re very welcome.
Hello, I just purchased this bike and my right crank arm hole is stripped and the peddle will not stay in. Do you have any recommendations on how to fix this?
Just make sure that you’re turning the pedal in the right direction. It’s not the usual clockwise turn for pedals. They are marked L and R as well so double check that. If the crank arm is stripped then returning the bike would be the best solution.
How low can the seat go? (In inches) I am 4' 11" and I can't find seat height/ inseam measurements on any website that sells this bike. (Including the pro-form website itself)
Do you have any idea how I can get taller handlebars for this thing? I'm 6' 4" and I've tried adjusting my seat everyway, but I keep kicking myself with my knees...
Have you adjusted (pulling the front knob under the handlebar and raising the handlebars up) and raising the seat? The handlebars are designed to ride low like a road bike with dropbars so maybe pull the seat up and out towards the rear of the bike. Maybe that will give you more space for your knees.
I'm 5"8 and those handlebars are too low and because of this I had to lower my seat which hurts my knees. Still I'm bent over and a lot of pressure on my shoulders. Not a fan of this bike.
What’s difference between 505 and 500
I’m not quite sure, I’m thinking 505 is the model for Walmart and the 500 is sold by Big 5, etc. The specs are pretty identical
isnt magenetic resistance overall no maint at all compare to belt?
Yes, magnetic resistance bikes are maintenance free
Magnetic resistance uses a belt and cost more. This model uses a belt as well and a friction pad against the flywheel.
I bought this bike and was super-excited to do my first workout with iFit. But the bike seat is literally murder. LOL. Can you recommend a specific replacement for people who are not avid bike riders?
Just look for a wider gel seat, most will fit on the bike
The seat is murder for the first 4-5 days, then you just get used to it, trust me, get back on
Nice
Gel seat cover goes over seat for greater comfort