Love your vods man Keep it up I will catch up with vods please upload more as soon as you can. I am also thinking of building the same theme myself by seeing your reference
Finally finished this Vod, slowly catching up :D loving the new playthrough! Keep it up Kin!! All the jumping with the parachute is unfortunately a bit nauseating for me though.
@@Kinstruction haha all good, like I said I'm easily motion sick :D There is nothing wrong with you jumping around. Its fun watching you really enjoy playing. Infectious enjoyment! One of the reasons I've been around so long!! Best content on YT in my opinion o/
lol thanks. I appreciate the comments. Been grinding on this video I've been working on for over a week. Should be out tomorrow. Helps to get reminded there's a lot of people out there that really do want to see what I've got. :)
Hey Kinstruction, thanks for your content and especially the VODs. I'm currently watching minute 110 and have a quick suggestion: overclock your coal power plants to 100MW (=1 power shard). That way, the ratio between power plant and water pump becomes 2:1. For each power plant, water consumption is 60 and coal consumption 20. Much nicer numbers than this crappy 8:3. Probably only relevant for your next season. Keep it up!
I do like overclocking power generating buildings. Its the best thing to cover clock in the game. I shied away from doing that because A: I didn't have a lot of shards, and B: a lot of players watching me wont have a lot either. But its a great solution and now with summersloops, its possible to get a ton of shards in the game very early.
Kin I’m new to your channel but have watched the first two VODs and heading to the third. I had to rewatch your planning, but only because I was distracted with my own game on the first play through lol. I have resisted looking at your EA vids cause I can tell you play well and I’m excited to see what you’ll make! ❤️ Kimi ❤
Thank you. Well you can watch the one from yesterday, its just a final walkthrough of my entire EA playthrough. I'm working on Ep 2 right now and I'll be recording VOD 4 this weekend. Thanks for watching. :)
Hmm, I don't think the belt behaviour changed. That "hitching" you're talking about happens when you have a manifold saturated - it happens when the machines (not) take in new items. A completely full belt wouldn't hitch if there's just a lower level belt in the line - it just goes slower. You either notice the speed or see the gaps on the belt AFTER the lower segment.
No, I think it changed, but not in the way I thought it did during this VOD. It still hitches in 1.0, but under different circumstances. Before 1.0 if I slowed down a mark II with a mark 1 in front of it, the mark II would hitch, now, the entire mk2 slows to the speed of the mark I, which I'm sure didn't happen in U8.
@@Kinstruction "now, the entire mk2 slows to the speed of the mark I, " Nah, it always did that when the belt was full. In this case the only thing "hitching" is the miner itself - it would be operating at around 50%. The hitching you talk about happens when machines are stopping even the 60 belt completely because none of them are taking in more input in that very moment.
I'm fairly certain that in update 8 the materials traveled at mark 2 speed until they hit a mark 1 belt. Then they'd slow to the mark 1 speed. So it would be jerky, going from 120 to 0 to 120 to 0 so fit 120 per min to 60 per min. I could be wrong, but this threw me so bad when it was live, makes me think it wasn't like this before. Maybe I can find a vid or vod that shows me finding an un-upgraded belt and fixing it. And seeing what it does to the line.
@@Kinstruction There could absolutely be hitching if say between the 1st and second machine you have a 60 belt on the manifold, and the 1st machine gets full - but then it's hitching between the smooth 60 speed and 120 whenever the 1st machine takes in more. That's all there is to it since.... update 6 it was I think I first started playing. I WAS talking to the screen telling you to check those belts 'cause they look slow. Didn't you hear it? :D
Go slow and enjoy yourself man. More fun content for us that way :) never did understand rushing through a game just to finish it and put it away again myself.
I found the SAM cave by accident....as in - falling into it! yes i died by big spider bites..... went back and claimed that SAM for my own. downside is trying to get it out by going up w/ conveyor lifts or wind belts back out of the cave.
5:21:31 why hasnt satisfactory not done what so many other factory do when machines are being belt fed and just limit the size of the stacks down what the machine needs? That way the first machine on the belt isnt sucking up 500 resources when it only needs 20. I get trying to be unique and that but features are a thing in so many games across the board for a reason. because they work and solve problems like this.
it's the high fov, it makes look things further away than they are and that then makes it look like you're going faster like the opposite of when you look through a telephoto lens while walking makes you look go really slow.
Yea, its always a balance. I try to interact, but my main goal is to focus on the build. I do make edited down versions of these VODs that cut out that interaction if you're interested.
anyone builld this beside me for some reason only 2 of the machines are filling up out of the 16 the rest dont keep the coal long enough the belt splits them both ways but the machines besides the 2 middle ones have 100 reast have 0 as fast as they get the coal it leaves
Just triple check your belt speeds. Sounds like there might be a mark I in there somewhere. If you came to my discord and post some pics in the satisfactory talk channel, someone in my community or myself will help you figure it out.
Really enjoying your content. Love the cyberpunk theme idea.
Thanks. I'm looking forward to it.
2:53:52
“Journey before Destination”
lol I caught that Stormlight Archive reference! I’m in the middle of Oathbringer currently
Nice. Wondered if anyone would catch it lol. I'm looking forward to the new book. Not long now.
@Kinstruction Those words will always be accepted. Even in surprise places like this.
I'm behind in my re-read! Damn youtube channel.... 😂
I'm so glad I found you! Best videos for this game by far and very descriptive.❤❤
That means a lot. There's a lot of great content creators for this game. Lol
Love your vods man Keep it up I will catch up with vods please upload more as soon as you can. I am also thinking of building the same theme myself by seeing your reference
Nice. We'll compare cities. I'll have a new vod up this weekend.
Finally finished this Vod, slowly catching up :D loving the new playthrough! Keep it up Kin!! All the jumping with the parachute is unfortunately a bit nauseating for me though.
OK, I'll try to lay off! (I'll try) lol Sometimes it happens without me thinking about it.
@@Kinstruction haha all good, like I said I'm easily motion sick :D There is nothing wrong with you jumping around. Its fun watching you really enjoy playing. Infectious enjoyment! One of the reasons I've been around so long!! Best content on YT in my opinion o/
lol thanks. I appreciate the comments. Been grinding on this video I've been working on for over a week. Should be out tomorrow. Helps to get reminded there's a lot of people out there that really do want to see what I've got. :)
Hey Kinstruction, thanks for your content and especially the VODs. I'm currently watching minute 110 and have a quick suggestion: overclock your coal power plants to 100MW (=1 power shard). That way, the ratio between power plant and water pump becomes 2:1. For each power plant, water consumption is 60 and coal consumption 20. Much nicer numbers than this crappy 8:3. Probably only relevant for your next season. Keep it up!
I do like overclocking power generating buildings. Its the best thing to cover clock in the game. I shied away from doing that because A: I didn't have a lot of shards, and B: a lot of players watching me wont have a lot either.
But its a great solution and now with summersloops, its possible to get a ton of shards in the game very early.
This might be mentioned later, but you can click on a power line while holding a pole, and then place a new one thatll split the line automatically
Yea it was. I always had such a hard time with it in u8 that I stopped trying to do it and old habits die hard lol.
Ohh, fair enough. I'm too lazy to cut and redo wire, so my wires end up looking like spider webs lol
Spider webs and spaghetti. Satisfactory BFFs
Kin I’m new to your channel but have watched the first two VODs and heading to the third.
I had to rewatch your planning, but only because I was distracted with my own game on the first play through lol.
I have resisted looking at your EA vids cause I can tell you play well and I’m excited to see what you’ll make!
❤️ Kimi ❤
Thank you. Well you can watch the one from yesterday, its just a final walkthrough of my entire EA playthrough. I'm working on Ep 2 right now and I'll be recording VOD 4 this weekend. Thanks for watching. :)
@@Kinstruction hope to be able to tune in!
Hope to see you there.
I searched for lets plays and saw yours was season 2 that's what grabbed me to be honest
Nice. Yes this is my second time through Satisfactory. :) I hope you enjoy.
@Kinstruction loving it mate, the pipe rebuild count had me giggling and honestly I liked the very first one the best with the close 45° 👌
Ha ha, yea. Sometimes satisfactory doesn't quite work the way you want it to.
You're building in my favourite spot
Yea its really nice down in that little valley.
Hmm, I don't think the belt behaviour changed. That "hitching" you're talking about happens when you have a manifold saturated - it happens when the machines (not) take in new items.
A completely full belt wouldn't hitch if there's just a lower level belt in the line - it just goes slower. You either notice the speed or see the gaps on the belt AFTER the lower segment.
No, I think it changed, but not in the way I thought it did during this VOD.
It still hitches in 1.0, but under different circumstances.
Before 1.0 if I slowed down a mark II with a mark 1 in front of it, the mark II would hitch, now, the entire mk2 slows to the speed of the mark I, which I'm sure didn't happen in U8.
@@Kinstruction "now, the entire mk2 slows to the speed of the mark I, "
Nah, it always did that when the belt was full. In this case the only thing "hitching" is the miner itself - it would be operating at around 50%.
The hitching you talk about happens when machines are stopping even the 60 belt completely because none of them are taking in more input in that very moment.
I'm fairly certain that in update 8 the materials traveled at mark 2 speed until they hit a mark 1 belt. Then they'd slow to the mark 1 speed. So it would be jerky, going from 120 to 0 to 120 to 0 so fit 120 per min to 60 per min. I could be wrong, but this threw me so bad when it was live, makes me think it wasn't like this before.
Maybe I can find a vid or vod that shows me finding an un-upgraded belt and fixing it. And seeing what it does to the line.
@@Kinstruction There could absolutely be hitching if say between the 1st and second machine you have a 60 belt on the manifold, and the 1st machine gets full - but then it's hitching between the smooth 60 speed and 120 whenever the 1st machine takes in more.
That's all there is to it since.... update 6 it was I think I first started playing.
I WAS talking to the screen telling you to check those belts 'cause they look slow. Didn't you hear it? :D
Maybe next time I'll hear it 😂
Go slow and enjoy yourself man. More fun content for us that way :) never did understand rushing through a game just to finish it and put it away again myself.
Yea I will. Plus, I have a job lol
Near your base in cave under the big arch have sam ore mine 7:48:57 🎉
Yea I try to get to it next vod, but I chicken out cuz I don't want to die lol
@@Kinstruction there is another entrance from the Cliff side. there are quite a few spiders by the way
Yes, chicken. lol maybe when I get the jetpack we'll talk lol
I found the SAM cave by accident....as in - falling into it! yes i died by big spider bites..... went back and claimed that SAM for my own. downside is trying to get it out by going up w/ conveyor lifts or wind belts back out of the cave.
I know lol. We'll claim it one day.....need more technology first lol
5:21:31 why hasnt satisfactory not done what so many other factory do when machines are being belt fed and just limit the size of the stacks down what the machine needs? That way the first machine on the belt isnt sucking up 500 resources when it only needs 20. I get trying to be unique and that but features are a thing in so many games across the board for a reason. because they work and solve problems like this.
It's not a big deal, it evens out over time.
it's the high fov, it makes look things further away than they are and that then makes it look like you're going faster
like the opposite of when you look through a telephoto lens while walking makes you look go really slow.
Yea, as the series progresses, I slowly turn the FOV down, get my self used to it. lol.
How do you get your holos to be white like that? Mine are the default orange and it gets tiring after a bit...
You can change the holograms in you UI settings.
@@Kinstruction Oh, thank you!
You're welcome. I'll go over it in a livestream.
Yeah one of the main reasons for me watching this is those "monster" creators spend most of their time interacting with chat.
Yea, its always a balance. I try to interact, but my main goal is to focus on the build.
I do make edited down versions of these VODs that cut out that interaction if you're interested.
@@Kinstruction "but my main goal is to focus on the build. " Yeah, I love that.
🫡
Didn’t you unlock the rebar gun in first VOD?
Who needs the rebar gun. I like bashin things. lol
(I should probably use it yes...)
anyone builld this beside me for some reason only 2 of the machines are filling up out of the 16 the rest dont keep the coal long enough the belt splits them both ways but the machines besides the 2 middle ones have 100 reast have 0 as fast as they get the coal it leaves
Just triple check your belt speeds. Sounds like there might be a mark I in there somewhere. If you came to my discord and post some pics in the satisfactory talk channel, someone in my community or myself will help you figure it out.
Thanks for the awesome content, I was wondering if you share your savefile?
I do share it, but it's one of the only perks I have for my channel members. 😀
@@Kinstruction Sweet thanks.
Np
You don't have ads turned off...
Ads are turned off for the livestream, turned on for the VOD.