Hey Kyle. Cool riveter.👌 Awesome to see another You Need This Tool video. I used to watch 'em every Friday after work and my daughters' ears would perk up during the intro.😁 Now, one is in college and the other is in the 10th grade. Listen to this ol' fool when he tells you, we appreciate what you do and don't blink because those younguns grow up too fast. Y'all have a great weekend!👊
There are different versions of this tool. There are hand hydraulic versions, air powered versions and electric versions. Those can compress larger rivets, and aren’t tiring. Good for when you’ve got a lot of rivets to do, in a business with a lot of sheet metal work. But if you think this manual version is expensive, think again. The others can cost over $2,000 depending on the capacity. But a tool is a tool. If you need it to make money with, and it lasts for many years, it’s still cheap.
That's a rivet squeeze the jaws are called rivet sets. Common sets are #3,#4,#5 and you can get flush sets and dimple dies for flush rivets. Don't use air hammers to shoot rivets get a proper rivet gun 2x,3x a or 4x that's how they drive.
I do leather work and I like to use solid copper rivets, but I don't like using a hammer to set them, (too noisy in an apartment). I saw this tool online, but there was no demo. Found you on RUclips. Thanks for the demo. I'll probably buy the tool.
I would recommend a video on how to determine what length rivet you need. They have gauges but not for solids. The half hollow rivet is called a hollow tail rivet if people were wondering.
CoolVideo i suffered a Traumatic BrainInjury that caused some Paralysis in one Leg and Arm. to Walk now i use a Cane and a Custom made Leg brace that is held on withVelcroStaps Riveted to a Fiberglass (basically ) shell that stiffens my leg and Foot but still allows me to bend my Knee to take normalGates in my Steps those Velcro straps are attached using Squeezw Rivets that are Flat and Flush on both sides they call themSpeedynRivets and i had one Pop on me on Vacations that i hand Bucked back together because i was 1000 miles away from the shop that builds my Braces without the Brace i need to ride ina Wheelchair so to avoid that i fixed it
Hello I was wondering if this will work for self piercing rivets for body sheet panels? I am doing the raptor bedside conversion on my 2020 f150 and want to use the same rivets that are in the stock bedside panels.
What size semi tubular rivets were you using in the video? They were stainless correct? The reason I ask is the ATS website says it works on rivets up to 5/32” aluminum or 1/8” steel?
I was just looking at the aluminum ladders at work the other day & they have that style river in them. I was wondering what kind of rivets they were. Interesting. Ha.
A long gone past friend of mine invented that stainless steel riveter (Don Townend, Tatco Rivet Squeezer) what you have there is a chinese copy of his tool. . . .www.tatco.com/
“Now who wants to Buck?” (Driving solid *hot* rivets)
Yes, and I *DO* want this tool!
I use that tool to set tubular rivets that are used on the mid year corvettes
What a wonderful Friday... I'm First and I want to wish all the viewers a fabulous & productive weekend!!
Dude you must have the "Ever Mans Dream Tool Box" you never cease to amaze with all the stuff you have....
lol...im sure. I do have a lot
Excellent tool. Every aircraft builder needs one period.
Hey Kyle. Cool riveter.👌 Awesome to see another You Need This Tool video. I used to watch 'em every Friday after work and my daughters' ears would perk up during the intro.😁 Now, one is in college and the other is in the 10th grade. Listen to this ol' fool when he tells you, we appreciate what you do and don't blink because those younguns grow up too fast. Y'all have a great weekend!👊
Thanks man
There are different versions of this tool. There are hand hydraulic versions, air powered versions and electric versions. Those can compress larger rivets, and aren’t tiring. Good for when you’ve got a lot of rivets to do, in a business with a lot of sheet metal work.
But if you think this manual version is expensive, think again. The others can cost over $2,000 depending on the capacity. But a tool is a tool. If you need it to make money with, and it lasts for many years, it’s still cheap.
That's a rivet squeeze the jaws are called rivet sets.
Common sets are #3,#4,#5 and you can get flush sets and dimple dies for flush rivets.
Don't use air hammers to shoot rivets get a proper rivet gun 2x,3x a or 4x that's how they drive.
I do leather work and I like to use solid copper rivets, but I don't like using a hammer to set them, (too noisy in an apartment). I saw this tool online, but there was no demo. Found you on RUclips. Thanks for the demo. I'll probably buy the tool.
Love your videos, Man! Get to learn a lot about some really cool and very useful tools for metal work. Thank you!
Ive built one that you put between the bench vise and clamps down for bombers seats and panels interiors
Thanks I've been looking for a tool to do this nicely.
Kyle, great to hear from you again ! Love the tool show's ! Keep them coming , thanks !
thanks
I want one of these I don't need it but it would just look cool hanging up.
It IS Friday foooooool!! And glad to see another Friday fool err tool video!
I would recommend a video on how to determine what length rivet you need. They have gauges but not for solids. The half hollow rivet is called a hollow tail rivet if people were wondering.
thanks
Thank you for giving us a shout out! We love your videos.
Funny I was just looking around for a tool like that ! Thanks
welcome
Cooolll Tool 4 This Friday Foool, God Bless All
Thanks
CoolVideo i suffered a Traumatic BrainInjury that caused some Paralysis in one Leg and Arm. to Walk now i use a Cane and a Custom made Leg brace that is held on withVelcroStaps Riveted to a Fiberglass (basically ) shell that stiffens my leg and Foot but still allows me to bend my Knee to take normalGates in my Steps those Velcro straps are attached using Squeezw Rivets that are Flat and Flush on both sides they call themSpeedynRivets and i had one Pop on me on Vacations that i hand Bucked back together because i was 1000 miles away from the shop that builds my Braces without the Brace i need to ride ina Wheelchair so to avoid that i fixed it
Good Ol' C squeeze. Use these all the time on helicopters
nice
That’s a nice tool.
I do need this tool. Thanks for sharing Kyle, I wondered how those type rivets were compressed.
I guess it's quite off topic but does anyone know a good site to watch newly released tv shows online ?
@Elon Prince flixportal :P
@Briar Bodie thanks, signed up and it seems like they got a lot of movies there =) I really appreciate it !
@Elon Prince Happy to help :)
Good one dude you got me on that one
Welcome back !
Brass rivets look good against aluminum panels
Hello I was wondering if this will work for self piercing rivets for body sheet panels? I am doing the raptor bedside conversion on my 2020 f150 and want to use the same rivets that are in the stock bedside panels.
What size semi tubular rivets were you using in the video? They were stainless correct? The reason I ask is the ATS website says it works on rivets up to 5/32” aluminum or 1/8” steel?
I was just looking at the aluminum ladders at work the other day & they have that style river in them. I was wondering what kind of rivets they were. Interesting. Ha.
Nice unit but not big enough for automotive. Need to squeeze 5mm solid steel rivets.
I have this tool!)))
Would this work on a window regulator roller rivet for a 1980 Vette?
Is this a air capital squeezer? I'm teting to find a good one to do some 3/32 rivets
Do any of those tools do open rivets that are empty in the center like on belts or gun holsters??
Yeah the one I did was an open rivet
Do they make 1/8 banks rivets
Awesome tool. How's the bibster coming along. Love the shop updates man that's going to be awesome when you're finished
Bibbster has been making no progress....gonna try and get some work done this week though
Well man I can't wait keep up the great work
After watching for years I still don't know what he does for a living
Make RUclips videos
🤠
Oh I know Mrs. frankina your cousin she’s an assistant principal at my school
Lol...that's rad!
Hey Kyle I guess your not going to Pits this weekend.
Nah gonna skip this year
@@Thefabforums Well if you're going then I'm not going. I just wanted to see the grey goose in person. Maybe next year.
@@Thefabforums if you are not going. Lol
@@tstepp8557 will be back next year for sure
Spray foam for days
1:21, should be in every man's living room...
lol...would make cool wall art
@@Thefabforums 0:04 should be in every man's cave and the woman isn't too bad either.
Jesus said Call no man fool
Anddd they couldn't ship to my country 😭😭
👍👍👍👍
Downfall of this tool? PRICE..!! Lol
yeah its not cheap
Unfortunately. I need one bad, but hate spending the money on it, when I have the $10 item that requires a hammer.. lol
A long gone past friend of mine invented that stainless steel riveter (Don Townend, Tatco Rivet Squeezer) what you have there is a chinese copy of his tool. . . .www.tatco.com/
Mine is made by ATS.....not sure in what country
What a wonderful Friday... I'm First and I want to wish all the viewers a fabulous & productive weekend!!