Perfect! I got a new scooter two days ago and the brake pad was rubbing on and off against the disc and this video he’ll me figured it out. Thank you!!
Thanks man, i finally got my brakes to work better. Before i repaired it i had to hold the break fully and it still wouldnt break that good, but now i hold the break halfly and it already brakes. Thank you! Subbed and Liked!
Thanks for the help, I watched another tutorial and after following it my brake was looser than before. With your video in 1 minute my brake is better than it ever was. Thank you agajn😊
To replace my rear fender latch spring on my Hiboy S2 Pro, I had to remove my rear wheel. After reassembly, my rotor was rubbing. This video helped me fix it quickly, thanks!
I couldn't do the first method because the screws would not come undone. I thought I was doomed until I did method two and it worked!! Thanks, you saved my bacon. I have to ride this thing down a big hill that always has lots of traffic. I was fearing the worst if I wasn't able to get it fixed myself. This is my only transport to work!! Thank you thank you!!
This video was extremely helpful. It taught me exactly what I needed to know in order to align and adjust my brakes after changing the rear wheel. Thank you for the video.
Thanks was confused for months how to tighten my front disc brakes. All along wasn't using the correct screws to loosen the caliper full position, was instead using the screws to hold it into place LOL. After this video i finally understood this : D
this is the best tutor on youtube,,,,,my problem is finally solved thankyou.... it became kind of or fight or victory depending on how to find it after those other pointless movies or hard to find vids.....👍🤔🤔🤔
Thankyou ,instantly fixed my brakes ,that were getting slightly loose this worked perfect,mine has a spring i pushed up and it tightened my brakes back to perfect, Perfectly aligned no grinding either
Unfortunately we haven’t tested either of those scooters, so I don’t know. Almost all electric scooters which use cable-driven disc brakes are very similar to what’s shown here. -Paul
I have 3 questions 1. I have the gotrax g4 and it says in the manual to inflate tires to 50PSI but tires say 36, what should I do? The main thing I want is that the tires should last for as long as possible, i don't care about comfort 2. Is there any way I can make it engage just the regenerative braking when I push breakes a bit, and when I push harder it also activates disc brake? 3. Tightening the brakes, will it decrease or increase range? And will it increase or decrease the lifespan of the breaks?
Could you PLEASE 🙏 do a guide on how to adjust breaks on the new Pro 4 model? I nearly died today going down hill. And how to adjust the stem on it as well, it already making that creaking sound after only 20 miles. Thank you.
Hi there! My electric scooter Gotrax Gxl V2 rear wheel is sometimes touching the brake disc even when im not pressing the brake handle, can you post a video about this fix?
if its new, might be from a bent disk. if its after adjustment, adjust your right pad while tire is turning as in 5:38, or it might happen because you tighten brake wire too much and left pad starts to touch disk.
Hi, the rear wheel of my Hiboy S2PRO only rub (sounds like metal on metal) when I am riding. It spins freely when off the ground which makes it very difficult to diagnose. Any insightful tips in this aspect?
The sound goes away when there isn't any weight on it? A certain amount of dragging noise is normal from disc brakes. Do you feel like it's dragging in addition to making noise? -Paul
Same problem. Brand new scooter makes a “metal on metal” sound coming from the front wheel. I think the disc brake is rubbing on something. Happens when I’m not on the scooter, too, and just rolling it forward. I’ll try the advice around the 3-min timestamp to fix this.
I copied David Vosk on this one. I love this thing. It's my second desk, my coffee table, an extra monitor stand during the live show, and of course a grear scooter stand. www.amazon.com/gp/product/B06XNZ5GV6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1&tag=electricsc0cc-20
I've adjusted my brother in laws scooter. The rear brake pads I can see have a gap on each side, but when I lift the scooter up and spin, it still feels like something is slowing the rear wheel down. I've released the wire. It still does it. I've checked the mud guard, and it feels close but still free. Are some electric scooters meant to have some friction?
This is what youtubers in general need to learn, pedagogic, several logic steps, good close camera and... what seems to be a youtuber decease: Not talk like adhd-speed and almost shouting. /Thanks
New scooter and I adjusted them as you show and they are still mushy and still need to be pulled basically all the way down. I can't take up any more slack without them rubbing. Thanks in advance for any advice.
So there is a little silver power button looking thing underneath the battery carriage that I'm not 100 % sure what it does. It's not a Dulatron, but I'm guessing it's to cut off the main power? It pushes in and out like a power switch. It's in the left side ooo5of where the plug input is, and whatver the othe circular thing next to it does.
Really great video! The original video from the brand that i bought my scooter from, lacks all the details that you go through, and adding what tools to use, as they only give you 2 different size keys to it...
a solid advice for everyone, tightening brake tire too much seems a better idea to you if you think you dont need regenerative brake or tail lights; that causes brake wire to snap too early than it should. i snapped once in a downhill and thank god for those regenative break on motor. dont worry, when wire's life comes to end, you can feel the thinner-wrapped-wires snapping one by one when you breaking. when it happens, GET YOURSELF A SPARE WIRE ASAP!!! also dont worry x2: changing brake wire is the most easy one in this models. any other bicycle mtb wire do, but be sure they are no shorter than exactly 200mm long. loose wire from caliper, squeeze break and pull out the head of the wire from its slot, reverse process on new wire and you are good to go. shouldnt take more than 2 or 3 minutes.
Let me know how it goes! Also check both ends of the cable to make sure it hasn't been pulled half way out of the socket. That can make your brakes drag too.
I just bought a TIF Galop T-108 scooter with Hydraulic disk brakes and both front and rear grip to strongly. There is no sweet spot. It's all or nothing. ow do you get the brakes to be less grippy?
Hi there. No brakes on electric scooter. I’ve tried adjusting the brake cable multiple times. After 2-3 applications of the brakes, they just loosen right up again. Any help would be truly appreciated. Thanks, Laurie
Is the cable getting loose? Check and make sure the cable clamp is getting a good grab on the cable. If you're using the adjusters (twisting them), you may have reached the end of travel of the adjusters. What model of scooter do you have? -Paul
@@ESG-ElectricScooterGuide i have no brakes in the front just a rear disc brake with 2 brake pads so the rear is the only one i use. Is ur reason still the same in my situation where i only have a brake in the rear
Hey! So recently a super small part of my E scooters disc brake has chipped, and I don’t know what to do since it’s metal and I can’t really fix it. It’s causing a ringing bell noise whenever I spin the wheel because of that chipped part. Does anyone know what I should do
May I suggest 2. My front wheel does a flap-flap-flap noise every revolution. It's not a metallic sound, sounds like something rubbery. But it's not the valve cap. When I tighten the bolts on the wheel, it reduces a bit. But it never did that in the begining. Perhaps knocking my wheel a few times a bit hard on cracks in the pavement did this? Second, how do you repair a tailight wire that was likely damaged by pressing the fender on the wheel to open the scooter? The front light turns on but not the tailight. XR Elite (Gotrax) scooter. Thought these issues might be common enough. :p
What other electric scooter fixes would you like to see? Let us know in the comments!
Apollo air please. Rear disc
Hiboy s2 pro, clamp-on the mudguard rattling
M365 break cable replacement please
Apollo explorer pls
Zero 10X
Perfect! I got a new scooter two days ago and the brake pad was rubbing on and off against the disc and this video he’ll me figured it out. Thank you!!
Glad it helped! -Paul
Thanks man, i finally got my brakes to work better. Before i repaired it i had to hold the break fully and it still wouldnt break that good, but now i hold the break halfly and it already brakes. Thank you! Subbed and Liked!
Thanks for watching
Thank you. Fixed my loose brake problem on the Gotrax scooter.
2 years later and still helped. Had little accident and didn’t know how to adjust it. Thank you
erm im having the problem where the back wheel isnt stopping when i turn breaks on
and only front ddoes
Thanks for the help, I watched another tutorial and after following it my brake was looser than before. With your video in 1 minute my brake is better than it ever was. Thank you agajn😊
Facts, 🤣🙏🏽
Super explained, I managed to make the brakes myself thanks to your video..😘
Haha thanks for the feedback
-Vosk
To replace my rear fender latch spring on my Hiboy S2 Pro, I had to remove my rear wheel. After reassembly, my rotor was rubbing. This video helped me fix it quickly, thanks!
Glad it helped!
After searching which video is the best instructions. I found this one to be the best result for what I was looking for and the most helpful.
Thanks for the kind words
-Vosk
Thank you for taking the time to post this, made it easy
I couldn't do the first method because the screws would not come undone. I thought I was doomed until I did method two and it worked!! Thanks, you saved my bacon. I have to ride this thing down a big hill that always has lots of traffic. I was fearing the worst if I wasn't able to get it fixed myself. This is my only transport to work!! Thank you thank you!!
Awesome! Thanks for watching. -Vosk
This video was extremely helpful. It taught me exactly what I needed to know in order to align and adjust my brakes after changing the rear wheel. Thank you for the video.
Glad it helped!
really best vid on adjusting the breaks on youtube! Well done man!
Thank you Paul! I just started e scooter racing and just bought one. Your video showed a lot and I really appreciate it❤
Glad I could help!
Best video explanation of this, much appreciated :)
Glad it was helpful!
my brakes weren't strong enough finally i figured out i needed to adjust the rear pad best video on RUclips for this!
Glad we were helpful! -Vosk
Got my Varla Pegasus up and running flawlessly. Thank you!
Thanks was confused for months how to tighten my front disc brakes. All along wasn't using the correct screws to loosen the caliper full position, was instead using the screws to hold it into place LOL. After this video i finally understood this : D
this is the best tutor on youtube,,,,,my problem is finally solved thankyou.... it became kind of or fight or victory depending on how to find it after those other pointless movies or hard to find vids.....👍🤔🤔🤔
Glad to hear that
This video is exactly what I was looking for. Thank you for your posting and sharing.
Glad it was helpful!
Followed your instructions fully and everything works great now. Thank you.
Awesome! Thanks so much. -Vosk
Thanks!
Thanks for watching! -Vosk
I'm going to try to fix it I'll be back
Watching this again with my new Scoot Air Wide Board 😇
Keep us posted
It’s been 6 months bro did u fix it?
@@sean6809 rider guide channel has a very thorough video
@@sean6809prob not
Thankyou ,instantly fixed my brakes ,that were getting slightly loose this worked perfect,mine has a spring i pushed up and it tightened my brakes back to perfect, Perfectly aligned no grinding either
We are glad! Thanks so much for stopping by. -Vosk
I just bought my kids two gotrac scooters opened them and one of them have no brakes thanks for the video very helpful
Sorry to hear that! Hope the video helped.
awesome video
superbly explained
thanks to this video i was able to fix my rear wheel block
thanks
Glad it helped! -Vosk
Good video but I admit I'd need to watch this about 5 times before I will attempt to work on the scooter 😄👍
You can do it. Just take your time! You can always bend it back. -Paul
This worked for me as well, Thankyou soo muchhh❤
Awesome to hear! I love making this kind of video! -Paul
Good to see a PRO share proper fixes . Cheers
Thanks 👍
Hello! Is there any brakes difference with urban glide e ecross pro?
Unfortunately we haven’t tested either of those scooters, so I don’t know. Almost all electric scooters which use cable-driven disc brakes are very similar to what’s shown here. -Paul
I have 3 questions
1. I have the gotrax g4 and it says in the manual to inflate tires to 50PSI but tires say 36, what should I do? The main thing I want is that the tires should last for as long as possible, i don't care about comfort
2. Is there any way I can make it engage just the regenerative braking when I push breakes a bit, and when I push harder it also activates disc brake?
3. Tightening the brakes, will it decrease or increase range? And will it increase or decrease the lifespan of the breaks?
45 PSI is recommended
@@ESG-ElectricScooterGuide I did 50, should I decrease?
This is a fantastic video! Thank you!
So glad I could help! -Paul
Could you PLEASE 🙏 do a guide on how to adjust breaks on the new Pro 4 model? I nearly died today going down hill. And how to adjust the stem on it as well, it already making that creaking sound after only 20 miles. Thank you.
We will try our best thank you! -Vosk
Ty, this was very clear and extremely helpful.
Thanks very much! -Vosk
What is a good upgrade to this caliper you show adjusting? I want to stay with a mechanical one? Thanks
These are generic ones!
Thanks
Extremely helpful thank you so much.
First video I watch and it's my exact scooter
Thanks a lot
Greetings from France
Our pleasure! Greetings.
You explained it perfectly ❤ thanks alot
You're welcome 😊 -Vosk
THANK YOU SO SO MUCH THIS MEANS ALOT
Our pleasure!
Thank you, a fantastic and informative video tutorial.
You're very welcome!
Where did you get the scooter repair stand that you have the scooter on I’m looking for something like that
geni.us/StandLift
It worked thank you
Awesome! Nice work! -Paul
really appreciate the great content, thanks!
Hi there! My electric scooter Gotrax Gxl V2 rear wheel is sometimes touching the brake disc even when im not pressing the brake handle, can you post a video about this fix?
Possibly in the future! Thanks for the suggestion. -Vosk
if its new, might be from a bent disk. if its after adjustment, adjust your right pad while tire is turning as in 5:38, or it might happen because you tighten brake wire too much and left pad starts to touch disk.
Hi, the rear wheel of my Hiboy S2PRO only rub (sounds like metal on metal) when I am riding. It spins freely when off the ground which makes it very difficult to diagnose. Any insightful tips in this aspect?
The sound goes away when there isn't any weight on it? A certain amount of dragging noise is normal from disc brakes. Do you feel like it's dragging in addition to making noise? -Paul
Same problem. Brand new scooter makes a “metal on metal” sound coming from the front wheel. I think the disc brake is rubbing on something. Happens when I’m not on the scooter, too, and just rolling it forward. I’ll try the advice around the 3-min timestamp to fix this.
Que vídeo incrível! Aplaudi por R$ 2,00 👏
Muito obrigado! -Paul
Thanks Paul for the video...very detailed! Where did you get your scooter stand?
I copied David Vosk on this one. I love this thing. It's my second desk, my coffee table, an extra monitor stand during the live show, and of course a grear scooter stand.
www.amazon.com/gp/product/B06XNZ5GV6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1&tag=electricsc0cc-20
I've adjusted my brother in laws scooter. The rear brake pads I can see have a gap on each side, but when I lift the scooter up and spin, it still feels like something is slowing the rear wheel down.
I've released the wire. It still does it. I've checked the mud guard, and it feels close but still free. Are some electric scooters meant to have some friction?
Each scooter is different!
Brilliant I've just fixed thankyou great information..
Glad it helped
How to tighten the head stock on a Caos 1000 scooter.please .and thanks .Alf..
This is what youtubers in general need to learn, pedagogic, several logic steps, good close camera and... what seems to be a youtuber decease:
Not talk like adhd-speed and almost shouting.
/Thanks
Cool! Thanks for sharing. -Vosk
Do you have a dedicated youtube channel just for these repairs? (ESG labs) If not can we suggest and request one please!
We will be including ESG Labs videos on this channel and will be releasing more VERY SOON! Thanks for watching! -Trina
:: Can adjusting the brakes effect the mileage?
New scooter and I adjusted them as you show and they are still mushy and still need to be pulled basically all the way down. I can't take up any more slack without them rubbing. Thanks in advance for any advice.
Thanks! Sorry it didn’t help.
Thanks man. This really helped me and my hiboy.
Fixing a flat with tubeless and tubes. There isn’t any good videos on this common fix.
Thanks! It’s near the top of the list! -Paul
For tubeless look up how to do it on motorcycles
If you feel like you need to squeeze really hard to stop, would that maybe mean that the braking caliper needs replaced or the disk?
Yes you shouldn’t be squeezing that hard! Thanks for watching. -Vosk
I have a Vision A9 Scooter that needs maintenance... you guys got one in the warehouse?
No we have not tried that one! -Vosk
The Rosen Meents in Israel has an Oddball of Electric Scooters 👀
So there is a little silver power button looking thing underneath the battery carriage that I'm not 100 % sure what it does. It's not a Dulatron, but I'm guessing it's to cut off the main power? It pushes in and out like a power switch. It's in the left side ooo5of where the plug input is, and whatver the othe circular thing next to it does.
Thank you so much it helped a lot.
You're welcome! -Vosk
Hey team would love to see what is the easiest method to fit a solid tire on the rear.
What about the brake adjustment with front and rear motors.
Good idea!
Thank you very much you saved my lifen😂❤
In my case I got the brake malfunction light on but there's no evident failure and it brakes just fine, what do you think it could be the problem?
Thank you very much! Highly recommended
Awesome! Thanks for sharing.
I just purchased the Aovo Pro es80. The brakes make a weird noise. What should I do to make the noises go away?
Contact the dealer for assistance! -Vosk
Where did you get those tools ?? Please answer
Plenty on amazon! Thank You.
Really great video! The original video from the brand that i bought my scooter from, lacks all the details that you go through, and adding what tools to use, as they only give you 2 different size keys to it...
Well done video.
Thank you ur advice will try
Let us know how it goes! -Paul
Thanks, that was helpful!
Thanks so much! Stay safe. -Vosk
a solid advice for everyone, tightening brake tire too much seems a better idea to you if you think you dont need regenerative brake or tail lights; that causes brake wire to snap too early than it should. i snapped once in a downhill and thank god for those regenative break on motor.
dont worry, when wire's life comes to end, you can feel the thinner-wrapped-wires snapping one by one when you breaking. when it happens, GET YOURSELF A SPARE WIRE ASAP!!! also dont worry x2: changing brake wire is the most easy one in this models. any other bicycle mtb wire do, but be sure they are no shorter than exactly 200mm long. loose wire from caliper, squeeze break and pull out the head of the wire from its slot, reverse process on new wire and you are good to go. shouldnt take more than 2 or 3 minutes.
Very insightful! Thanks for sharing. Vosk
I fell off my scooter earlier today and now the rear wheel drags hard. I hope its just one of these things i have to readjust
Let me know how it goes!
Also check both ends of the cable to make sure it hasn't been pulled half way out of the socket. That can make your brakes drag too.
will this fix my back wheel not moving when i’m spinning it and slowing down the scooter ??
Give it a try!
Controller and motor diagnostics and replace if needed
Great vid! Very informative. How about a Fiido with seat scooter. ☺️
I just bought a TIF Galop T-108 scooter with Hydraulic disk brakes and both front and rear grip to strongly. There is no sweet spot. It's all or nothing. ow do you get the brakes to be less grippy?
some scooters parts like brakes are just less quality then others!
I agree with you all, it took 2 secs to adjust the caliper. Had no clue of that &^%#$ screw !!! Thanks
Hi there.
No brakes on electric scooter.
I’ve tried adjusting the brake cable multiple times.
After 2-3 applications of the brakes, they just loosen right up again.
Any help would be truly appreciated.
Thanks, Laurie
Is the cable getting loose? Check and make sure the cable clamp is getting a good grab on the cable. If you're using the adjusters (twisting them), you may have reached the end of travel of the adjusters.
What model of scooter do you have? -Paul
thank you so much, took me 30 seconds to fix
Thanks for watching
I think I have dirt of some sort in the area where the break pads meet the disk break. How do I remove that????
Try an air duster!
Very helpful
Thanks for watching
Thanks man it helped
Thanks for watching
For me its hard to pull the brake lever with my hand, so what would i need to adjust? Please help
Which scooter do you have ?
I fixed my scooter thx to you
Awesome! Glad to hear. -Vosk
actually helped me in reverse lol my tires were super sticky and would prety much stop me when i would let go of throttle
how do you adjust the caliper with a rear motor?
We will try to make a video in the future!
Where can I buy the tools
Should be plenty on Amazon! -Vosk
I’ve noticed one of my break pads are wearing faster than the other. What causes this?
Most people brake most with their rear brake so that would be the reason why it gets worn quicker! -Vosk
@@ESG-ElectricScooterGuide i have no brakes in the front just a rear disc brake with 2 brake pads so the rear is the only one i use. Is ur reason still the same in my situation where i only have a brake in the rear
Hey! So recently a super small part of my E scooters disc brake has chipped, and I don’t know what to do since it’s metal and I can’t really fix it. It’s causing a ringing bell noise whenever I spin the wheel because of that chipped part. Does anyone know what I should do
There might be a tool on Amazon to straighten bent rotors.
May I suggest 2. My front wheel does a flap-flap-flap noise every revolution. It's not a metallic sound, sounds like something rubbery. But it's not the valve cap. When I tighten the bolts on the wheel, it reduces a bit.
But it never did that in the begining. Perhaps knocking my wheel a few times a bit hard on cracks in the pavement did this?
Second, how do you repair a tailight wire that was likely damaged by pressing the fender on the wheel to open the scooter?
The front light turns on but not the tailight. XR Elite (Gotrax) scooter.
Thought these issues might be common enough. :p
Thank u!
How do I fix red light , break mode on how do I fix that please help thanks
We will try to make a video!
How do u adjust the front brakes. All videos show back brakes
Hopefully we will make a video in the future! Thanks for stopping by. -Vosk
I bent my back disc brake and now it won’t line up with the calipers to where it won’t scrape. Help!
Take it to a local bike shop! They will assist you. -Vosk
Thank you so much!
Legend has ot comments posted are only to keep this video relevant 😅
I did the first adjustment and the break is waaay better but I can’t make the break light work anymore
Is it still under warranty ?
@@ESG-ElectricScooterGuide no, I have it for 3years… I don’t think the light is working at all actually, not even when it’s charging
Very good indeed - thanks Paul.
Great knowledge to have. You're a RoCK StaR Paul.
Thanks so much Rusty! -Paul
Thank you so much for this idiot proof description. Top class teacher!👏👏👏