DIY CV Boot Clamp Tool

Check out this awesome DIY CV boot banding tool I made for tightening CV axle boot clamps. Some CV boot bands can be reused and some clamps have to be tightened with special CV boot clamp pliers. I am replacing the damaged boots on my ATV CV axles. TOOL LINKS BELOW:
CV Boot Clamp Tools:
● Band Pliers: amzn.to/2Rtm0oX
● Clamp Crimp Pliers: amzn.to/2TYK58G
● Both Type Pliers: amzn.to/30WYxQh (Better deal, but cheaper quality)
New CV Clamps:
● Band Type: amzn.to/3aM0CD5
● Crimp Type: amzn.to/3aKNKNr
This is a 2007 Suzuki Vinson 500 4x4 Auto. It has the same motor as a 2003-2007 Arctic Cat 500 4x4.
As an Amazon Associate I earn from qualifying purchases.

[@johnshotton6014]

just built one on the weekend, I curved both sides in to narrowed the end that pushes against the clamp to a little bigger than the clamp and I was able to do the joint while the axle was still attached to the diff., Worked awesome. Thanks for the video.

[@MattsShop]

Awesome, you're welcome!

[@HammerFleet]

thank you for your beautifully simple design i love it. and i nearly zero hope of finding anything that wasnt a waste of time .

[@MattsShop]

You're welcome 😊

[@dambat2]

This works amazing. Took 5 minutes to make and can use either end. Suspect it works better than the commercial version.

[@MattsShop]

I know it works amazingly well.

[@Mitons]

Thanks for the video. Going to save me a lot of time and money today. With all special tools that is required today to repair cars it's great to be able to construct some of them yourself. Thumbs up!

[@MattsShop]

Thanks man you're welcome.

[@Mike_44]

Awesome work! Nothing like DIY invented tools!

[@MattsShop]

And saved money and time!

[@AlphaSykotik]

I found a hook and I turned buckle took the two separate hook into eye bolts out and it replaced it with one long one and did the same thing for $5 with no welding. But your video gave me the idea

[@MattsShop]

Yup, it doesn't take much. You just have to twist the tag eng up.

[@AlfonsoGudino-l1f]

Very cool and inventive. Thank you. I will start making one in the morning.

[@MattsShop]

Good luck! You're welcome!

[@1crazynordlander]

Ingenious! Thanks for sharing! This deserves a thumbs up, subscribe and I hit the notification bell!

[@MattsShop]

Thanks! Appreciate it!

[@crfuzz1144]

Dude awesome, going to be building one of these this weekend when I reboot my CV axles!

[@MattsShop]

Nice! Let us know how it goes!

[@Floridamarty]

Great simple design. Thank you.

[@MattsShop]

You’re welcome 😊

[@ronsteelable9405]

Dude this saved my butt. I was struggling with those stupid clamps. Thanks a bunch!

[@MattsShop]

You're welcome! 👍🏼

[@superbee6270]

You a genius i like it , i like people who use there brains

[@MattsShop]

Thanks.

[@diane-mn8ou]

I like simple I like making things myself as well as saving money goof delivery very informative

[@Potatogambit]

Thanks man. Saved me a trip to the auto parts store.

[@MattsShop]

Yea, me too. Saved me $$$ and time.

[@mariojhorge23]

Well made. Congrats

[@MattsShop]

Thanks

[@Backalleydiagnostics]

Great job! Just bought one of those. Yours is definitely heavier duty !

[@MattsShop]

Right on!

[@davisflydesigns]

To do this without fabricating anything, I just used a door hinge. Awesome idea - thank you for sharing!

[@MattsShop]

I love it. Even simpler.

[@steveakendo8579]

How? You have a video?

[@bobochan4699]

@@steveakendo8579 yeah, would love to see it

[@bobochan4699]

door hinge got holes built in, just find a bolt to complete the project. but its kind a small

[@shaungrubb6598]

Great vid. I just made one and worked awesome.

[@MattsShop]

Nice work!

[@mbc1994]

Have to change cv joint tomorrow (sunday), can't find my clamp tool, will make something like this.

[@MattsShop]

It'll work great!

[@mbc1994]

@@MattsShop it did 👍

[@czierwo]

Replaced my axle few months ago, now switching tires into winters, I just found out another one pooped out as well. Shit, I may just fix it myself as well. I still have my old axles, just need new boots, grease and some time/patience. Original axles are superior to the new aftermarket ones, well worth the time. Just inconvenient.

[@MattsShop]

You're right, the OEM parts are always better!

[@brendandemjanec5737]

With the right leverage you could probably cut a slit into a 1/4 drive socket and ratchet it tight

[@rolandlluis3153]

Awesome innovation ✊💯

[@MattsShop]

Thanks 💯

[@tonyl4003]

Brilliant!

[@kudabesi3683]

Thanks. Now I know what to do. Brilliant Idea, so simple👍👍👍👍👍

[@MattsShop]

You're welcome! This saved me a TON of time and money!

[@danlzlz8405]

How did you get the boots on the shaft? My polaris axle you cannot dissassemble the cvs to slide boots on.
Ive seen the cone type system used, I've seen the expansion tool that stretches the boot too. But how did you do it?
Brilliant simplicity!

[@javenmarkroldan4075]

Napakagandang idea 💡

[@kirkcarmichael9882]

Thank you very much this video was very helpful. Well done..

[@MattsShop]

Anytime!

[@greggumbs1935]

Like your style kid!!

[@MattsShop]

Thanks, I like yours too!

[@nwolfll3314]

Genius!

[@kakawiseman3064]

Good work

[@MattsShop]

Thanks

[@bobaudette79]

Thanks a lot. Way too easy!

[@luis9585]

Nice job bro.

[@steveakendo8579]

Wow good one

[@slavyanskiyrusich3368]

Great idea!!! 👍

[@MattsShop]

Thank you! 😊

[@davidjacobo9831]

Thanks works great.

[@MattsShop]

Yea, it works AWESOME!

[@davidkaranu]

Very resourceful

[@MattsShop]

I try!

[@davidjonez125]

🔥

[@Bronco93]

Good Job.. Thank you

[@MattsShop]

Welcome 👍

[@mrbreezeet1]

Slick

[@markopalikko6986]

👌 Awesome

[@casheti]

Holy man that's clever as fk!

[@MattsShop]

I know right!

[@alinutzalin6346]

4:04 What if you only drive your car in reverse? xD

[@MattsShop]

Then do it opposite HAHA

[@bluefallon6374]

Nice, very inventive.

[@wranglercjseven69]

just use a spam can key lol

[@MattsShop]

Great Idea!!

[@gkeith4120]

Just simular to eBay $6 tool!

[@gkeith4120]

Except twice the work.

[@MattsShop]

And 1000th of the time wasted. I hate waiting on parts.

[@gkeith4120]

Matt's Shop actually would be classified as a “tool”.

[@plain_and_simple]

Ghetto but it works

[@Bass.Player]

These types of clamps are junk!