1997-2001 Toyota Camry Front & Rear Brakes - Quick & Easy
HTML-код
- Опубликовано: 13 сен 2024
- In this video we will be replacing front and rear brakes.I will also show you how to remove a rusted rotor and adjust the parking brake.
Here are some of the tools that jimthecarguy uses
www.amazon.com...
Brake Spring Compression Tool amzn.to/3xr8lSJ
Irwin Vise Grips amzn.to/3xqTTKm
Irwin Cutting Pliers. amzn.to/3D9jRnb
Brake Spring Tool. amzn.to/3rfM4pU
Brake Lube. amzn.to/3p6b68k
Due to factors beyond the control of jimthecarguy, it cannot guarantee against unauthorized modifications of this information,. jimthecarguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. jimthecarguy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of jimthecarguy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not jimthecarguy.
One thing for our fellow DIY. Open the brake fluid reservoir slightly and or verify that the fluid level is not close to the top just before compressing the caliper pistons otherwise the fluid will spill over and make a mess. Best not to leave the reservoir cap open too long because most fluid types are hydroscopic and will attract moisture in the air. I usually will pull out most of the reservoir fluid as the first step and then close the cap. Thank you for your videos. Keep them coming
Very good Rotor brake pad replacement job well done with great advice. However, with the car's age, I would have recommended at least a flush of the brake fluid. Most manufacturers recommend flushing your brake fluid after 6 to seven years due to the fact hydraulic fluid absorbs moisture which moisture can cause a spongy brake pedal. I just want to add because this is Jim's customer he may have already done a complete brake job and bled the brakes previously, I'm just saying this because fresh clean brake fluid is very important for the brake system.
Great video again Jim. Complete Pro! 👍😀
Thanks 👍
Just like my old previous car Toyota Avensis 2002 :)
As always another great video very educational. Many thumbs up. Stay well & safe Jim.
This isn't for all Camrys in that year set. Some have rear drums.
Jim, for those in the rust belt, can you recommend any rust-resistant "coated" rotors? I notice that you never put any rust inhibitor between the hub and the rotor, or between the rotor and the wheel. Is it not a good idea, or in your experience does it not help prevent siezing?
Good work Jim, nicely done.
Glad you enjoyed it
Never re-use brake hardware. Always replace. Owner doesn't want to spend a few more bucks to do the job right, you should have refused the job. If brakes fail, you get the blame. Brake shoes aren't expensive enough to not do them. As a business owner, you have to consider your liability.